ARMY UFGS-12 50 00-2009 FURNITURE SYSTEMS《家具系统》.pdf

《ARMY UFGS-12 50 00-2009 FURNITURE SYSTEMS《家具系统》.pdf》由会员分享，可在线阅读，更多相关《ARMY UFGS-12 50 00-2009 FURNITURE SYSTEMS《家具系统》.pdf（35页珍藏版）》请在麦多课文档分享上搜索。

1、USACE / NAVFAC / AFCESA / NASA UFGS-12 50 00 (February 2009)-Preparing Activity: USACE SupersedingUFGS-12 50 00 (January 2007)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated January 2009SECTION TABLE OF CONTENTSDIVISION 12 - FURNISHINGSSECTION 12 50 00FURNITURE SYS

2、TEMS02/09PART 1 GENERAL1.1 REFERENCES1.2 SYSTEM DESCRIPTION1.2.1 Workstations1.2.2 Samples1.2.3 Mock-up1.2.4 ALTERNATE DESIGN1.2.4.1 Component Requirements1.2.4.2 Wiring Configuration1.2.5 Sustainable Design1.2.5.1 Local/Regional Materials1.2.5.2 Environmental Data1.2.5.3 Certification1.2.6 Performa

3、nce Requirements1.2.6.1 Selected Components1.2.6.2 Panel Acoustics1.2.6.3 Panel Glazing1.2.7 Pattern and Color1.3 SUBMITTALS1.4 QUALITY ASSURANCE1.4.1 General Safety1.4.2 Fire Safety1.4.3 Electrical System1.4.4 Detail Drawings1.5 DELIVERY, STORAGE, AND HANDLING1.6 WARRANTY1.7 MAINTENANCE SERVICEPART

4、 2 PRODUCTS2.1 MATERIALS2.1.1 Metal2.1.2 Composite Wood and Fiberboard2.1.3 Remanufactured or Refurbished Furniture Systems2.1.4 PlasticSECTION 12 50 00 Page 1Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-2.1.5 Fabric2.1.6 Linoleum2.1.7 Paints and

5、Coatings2.2 PANEL SYSTEM SPINE WALL SYSTEM DESK-BASED SYSTEMS2.2.1 Panel System2.2.2 Stacking Panel-Frame System2.2.3 Spine Wall System2.2.4 Desk-Based Systems2.2.5 Finishes2.2.6 Raceways2.2.7 Leveling Glides2.2.8 Connection System2.2.9 Wall Mounted Panels2.2.10 Glazed Panel Inserts2.2.11 Door Panel

6、s2.2.12 Sliding Doors2.3 WORK SURFACES2.3.1 General Requirements2.3.2 Finishes2.4 PEDESTALS2.4.1 Construction2.4.2 Finishes2.4.3 Drawer Requirements2.5 STORAGE CAPACITY2.5.1 Shelf Unit Construction2.5.2 Overhead Cabinet Construction2.5.3 Lateral File, Vertical File, Pedestal and Book Case Constructi

7、on2.5.4 Personal Storage Tower Construction2.5.5 Finish2.6 ACCESSORIES2.6.1 Coat Hook2.6.2 Keyboard Tray2.6.3 Computer Turntables2.6.4 Tackboards2.6.5 Erasable Marker Boards2.6.6 Paper Management Unit2.6.7 Wall Mounted Components2.6.8 CPU Holder2.6.9 Signage2.6.10 Slat Tile2.6.11 Monitor Arm2.7 MISC

8、ELLANEOUS HARDWARE2.8 LOCKS AND KEYING2.9 POWER AND COMMUNICATIONS2.9.1 Panel Raceways2.9.2 Spine Wall2.9.3 Power Distribution2.9.3.1 Receptacles2.9.3.2 Power Cabling Variations2.9.4 Electrical Connections2.9.4.1 Internal Connections2.9.4.2 Connections to Building Services2.9.5 Wire Management2.9.6

9、Circuit Layout2.9.7 Service Entry Poles2.9.8 Task Lighting2.9.8.1 Luminaire Configuration2.9.8.2 WiringSECTION 12 50 00 Page 2Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-2.9.9 Communications2.9.10 Special SystemsPART 3 EXECUTION3.1 INSTALLATION3.

10、2 CLEANING3.3 WASTE MANAGEMENT- End of Section Table of Contents -SECTION 12 50 00 Page 3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-USACE / NAVFAC / AFCESA / NASA UFGS-12 50 00 (February 2009)-Preparing Activity: USACE SupersedingUFGS-12 50 00 (

11、January 2007)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated January 2009SECTION 12 50 00FURNITURE SYSTEMS02/09NOTE: This guide specification covers the requirements for furniture systems which include panel-supported, stackable panel, spine wall and desk-supported

12、 furniture systems.Edit this guide specification for project specific requirements by adding, deleting, or revising text. For bracketed items, choose applicable items(s) or insert appropriate information.Remove information and requirements not required in respective project, whether or not brackets

13、are present.Comments and suggestions on this guide specification are welcome and should be directed to the technical proponent of the specification. A listing of technical proponents, including their organization designation and telephone number, is on the Internet.Recommended changes to a UFGS shou

14、ld be submitted as a Criteria Change Request (CCR).This guide specification includes tailoring options for USACE and non-USACE. Selection or deselection of a tailoring option will include or exclude that option in the section, but editing the resulting section to fit the project is still required.PA

15、RT 1 GENERALNOTE: Various provisions of this guide specification may be irrelevant to or in conflict with the requirements of any given project. This spec should be carefully edited to fit the needs of each specific application. Portions must be deleted, if not applicable, and additional material in

16、serted where necessary to adequately delineate SECTION 12 50 00 Page 4Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-requirements. Brackets and blanks identify provisions which involve alternates; the editor must select and/or insert the appropriate

17、 requirements.1.1 REFERENCESNOTE: This paragraph is used to list the publications cited in the text of the guide specification. The publications are referred to in the text by basic designation only and listed in this paragraph by organization, designation, date, and title.Use the Reference Wizards

18、Check Reference feature when you add a RID outside of the Sections Reference Article to automatically place the reference in the Reference Article. Also use the Reference Wizards Check Reference feature to update the issue dates.References not used in the text will automatically be deleted from this

19、 section of the project specification when you choose to reconcile references in the publish print process.The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.AMERICAN NATIONAL STANDA

20、RDS INSTITUTE (ANSI)ANSI Z97.1 (2004) Safety Glazing Materials Used in BuildingsASTM INTERNATIONAL (ASTM)ASTM C 1048 (2004) Standard Specification for Heat-Treated Flat Glass - Kind HS, Kind FT Coated and Uncoated GlassASTM C 423 (2008a) Sound Absorption and Sound Absorption Coefficients by the Reve

21、rberation Room MethodASTM D 1972 (1997; R 2005) Standard Practice for Generic Marking of Plastic ProductsASTM E 2129 (2005) Standard Practice for Data Collection for Sustainability Assessment of Building ProductsASTM E 290 (1997a; R 2004) Bend Testing of Material for DuctilityASTM E 84 (2008a) Stand

22、ard Test Method for Surface Burning Characteristics of Building SECTION 12 50 00 Page 5Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MaterialsBIFMA INTERNATIONAL (BIFMA)BIFMA X5.5 (1998) Desk ProductsBIFMA X5.6 (2003) Panel SystemsGREENGUARD ENVIRO

23、NMENTAL INSTITUTE (GEI)GEI Greenguard Standards for Low Emitting ProductsNATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)NEMA WD 1 (1999; R 2005) Standard for General Requirements for Wiring DevicesNEMA WD 6 (2002; R 2008) Standard for Wiring Devices - Dimensional RequirementsNATIONAL FIRE PROTE

24、CTION ASSOCIATION (NFPA)NFPA 101 (2008) Life Safety Code, 2006 EditionNFPA 255 (2005; Errata 2006) Standard Method of Test of Surface Burning Characteristics of Building MaterialsNFPA 265 (2006) Fire Tests for Evaluating Room Fire Growth Contribution of Textile Coverings on Full Height Panels and Wa

25、llsNFPA 70 (2007; AMD 1 2008) National Electrical Code - 2008 EditionSCIENTIFIC CERTIFICATION SYSTEMS (SCS)SCS Scientific Certification Systems (SCS)Indoor AdvantageTELECOMMUNICATIONS INDUSTRY ASSOCIATION (TIA)TIA-569-B (2004) Commercial Building Standard for Telecommunications Pathways and SpacesU.

26、S. GREEN BUILDING COUNCIL (USGBC)LEED (2002; R 2005) Leadership in Energy and Environmental Design(tm) Green Building Rating System for New Construction (LEED-NC)UNDERWRITERS LABORATORIES (UL)UL 1286 (2008) Office FurnishingsUL 723 (2008) Standard for Test for Surface Burning Characteristics of Buil

27、ding SECTION 12 50 00 Page 6Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Materials1.2 SYSTEM DESCRIPTION1.2.1 WorkstationsThis specification establishes the minimum requirements for the acquisition and installation of a complete and usable system

28、of workstations composed of panels, stacking panel-frames, spine walls, freestanding work surfaces or base units, supporting components, electrical hardware, communications, special electrical features, and accessories. Workstation requirements and configurations shall be in accordance with the furn

29、iture layout and typical workstation types shown in drawings and specified herein. Provide components and hardware from a single manufacturer; they shall be standard products as shown in the most recent published price lists or amendments. Electrical components shall be products of a single manufact

30、urer to the extent practicable (different types of components may be of different manufacturers, but all units of a given component shall be from a single source). The completed installation shall comply with NFPA 70 and NFPA 101. Coordinate the work of this section with that to be performed under o

31、ther sections. This specification may include items which are not manufactured by the furniture manufacturer; provide any such items under this section.1.2.2 SamplesSubmit four sets of the finish samples listed below:a. Panel, tackboard and overhead door fabric. Minimum 150 by 150 mm 6 by 6 inches w

32、ith label designating the manufacturer, color, fiber content, fabric weight, fire rating, and use (panel and/or tackboard).b. Panel, spine wall, work surface, modesty panel, and component finish. Minimum 60 by 75 mm 2-1/2 by 3 inches with label designating the manufacturer, material composition, thi

33、ckness, color, and finish.c. Task lights.d. Panel and spine wall glazing. Glazing samples with label designating the material and safety ratings.1.2.3 Mock-upSubmit a Mock-up of an actual workstation. Reflecting approved finishes and fabrics in the workstation mock-up . Locate the mock-up installati

34、on at the local dealershipapproved off-site location_. Do not order furniture systems for the project until the mock-up has been approved. Review of the mock-up may result in adjustments to the product, layout and finishes. The approved mock-up can be used in installation.1.2.4 ALTERNATE DESIGN*NOTE

35、: Minor differences exist among different manufacturers product. This paragraph pertaining to an “alternate design“ was written in order not to exclude a manufacturer when an equally acceptable solution is proposed.SECTION 12 50 00 Page 7Provided by IHSNot for ResaleNo reproduction or networking per

36、mitted without license from IHS-,-,-*Manufacturers who are unable to provide workstations that conform exactly to the furniture layouts and typical workstation types shown in the contract drawings, may submit alternate designs for consideration by the Contracting Officer. Alternate designs shall mee

37、t or exceed the following criteria. Alternate designs that are submitted but do not meet these criteria will be rejected. The alternate design shall provide workstations and components of the same basic size and configuration shown, with only the sizes of the individual components within the worksta

38、tion changed to meet the standard product of the manufacturer or site conditions.1.2.4.1 Component RequirementsThe types of components or elements utilized shall be as shown on the drawings and as specified in PART 2 PRODUCTS of this specification. The storage capacity, number of workstations accomm

39、odated, width of aisles, or workstation configuration shall not be reduced.1.2.4.2 Wiring ConfigurationAlternate configurations shall support the circuiting and connection capabilities identified under the provisions pertaining to power distribution of paragraph POWER AND COMMUNICATIONS. Generally a

40、ny alternate will be acceptable which involves only a variation in size or quantity that exceeds the specified configuration.1.2.5 Sustainable Design1.2.5.1 Local/Regional Materials*NOTE: Using local materials can help minimize transportation impacts, including fossil fuel consumption, air pollution

41、, and labor. Using materials harvested and manufactured within a 500 mile radius from the project site contributes to the following LEED credit: MR5. Coordinate with Section 01 33 29 LEED(tm) DOCUMENTATION. Use second option if Contractor is choosing local materials in accordance with Section 01 33

42、29 LEED(tm) DOCUMENTATION. Use second option for USACE projects. Army projects will include option only if pursuing this LEED credit.*Use materials or products extracted, harvested, or recovered, as well as manufactured, within a 800_ km500_ mile radius from the project site, if available from a min

43、imum of three sources. See Section 01 33 29 LEED(tm) DOCUMENTATION for cumulative total local material requirements. Furniture and materials may be locally available.1.2.5.2 Environmental DataSubmit Table 1 of ASTM E 2129 for the following products: _.1.2.5.3 CertificationProduct shall be third part

44、y certified by GEI Greenguard Indoor Air Quality SECTION 12 50 00 Page 8Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Certified, SCS Scientific Certification Systems Indoor Advantage or equal. Certification shall be performed annually and shall be

45、current.1.2.6 Performance RequirementsPanels, spine walls, frames and frame covers, connection system, work surfaces, pedestals, shelf units, overhead door cabinets, lateral files, locks, accessories, and miscellaneous hardware shall meet testing as specified. ISO 9001 certified manufacturers may pe

46、rform inhouse testing. Manufacturers not ISO 9001 qualified will be required to produce testing by an independent testing laboratory. Component specific requirements are listed in appropriate paragraphs.1.2.6.1 Selected ComponentsWorkstations shall conform to the requirements of BIFMA X5.5 and BIFMA

47、 X5.6 with the following exceptions: Panels, spine walls and panel, or spine wall supported components shall be tested and pass in accordance with the requirements of BIFMA X5.6 and representative items shall be selected for testing based on worst case situations (i.e., the deepest and widest work surface or shelf). Perform the keyboard drawer or shelf test applying a 19 kg 50 lb load to the center of the keyboard sh