ARMY UFGS-09 68 00-2013 CARPETING.pdf

《ARMY UFGS-09 68 00-2013 CARPETING.pdf》由会员分享，可在线阅读，更多相关《ARMY UFGS-09 68 00-2013 CARPETING.pdf（19页珍藏版）》请在麦多课文档分享上搜索。

1、*USACE / NAVFAC / AFCEC / NASA UFGS-09 68 00 (November 2013)-Preparing Activity: USACE SupersedingUFGS-09 68 00 (May 2010)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated October 2013*SECTION TABLE OF CONTENTSDIVISION 09 - FINISHESSECTION 09 68 00CARPETING11/13PART

2、1 GENERAL1.1 REFERENCES1.2 SYSTEM DESCRIPTION1.2.1 Local/Regional Materials1.2.2 Environmental Data1.2.3 Scheduling1.3 SUSTAINABILITY REQUIREMENTS1.3.1 LEED REQUIREMENTS1.3.2 EPA Comprehensive Procurement Guidelines1.3.3 USDA Biobased1.4 SUBMITTALS1.5 QUALITY ASSURANCE1.6 DELIVERY, STORAGE, AND HAND

3、LING1.7 AMBIENT CONDITIONS1.8 WARRANTYPART 2 PRODUCTS2.1 CARPET2.1.1 Carpet2.1.2 Moldings2.1.3 Special Treatment Materials2.1.4 Physical Characteristics for BroadloomModular TileEntrance Carpet2.1.4.1 Carpet Construction2.1.4.2 Type2.1.4.3 Pile Type2.1.4.4 Pile Fiber2.1.4.5 Gauge or Pitch2.1.4.6 Sti

4、tches or Rows/Wires2.1.4.7 Surface Pile Weight2.1.4.8 Pile Thickness2.1.4.9 Pile Density2.1.4.10 Dye Method2.1.4.11 Backing MaterialsSECTION 09 68 00 Page 1Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-2.1.4.12 Attached Cushion2.2 PERFORMANCE REQUI

5、REMENTS2.2.1 Static Control2.2.2 Flammability and Critical Radiant Flux Requirements2.2.3 Tuft Bind2.2.4 Colorfastness to Crocking2.2.5 Colorfastness to Light2.2.6 Colorfastness to Water2.2.7 Delamination Strength2.2.8 Antimicrobial2.3 CARPET CUSHION2.3.1 Fiber Cushion2.3.1.1 Weight2.3.1.2 Thickness

6、2.3.1.3 Density2.3.2 Rubber Cushion2.3.2.1 Weight2.3.2.2 Thickness2.3.2.3 Compression Resistance2.3.2.4 Density2.3.3 Polyurethane-Foam Cushion2.3.3.1 Compression Force Deflection at 65 Percent2.3.3.2 Thickness2.3.3.3 Density2.3.4 Performance Requirements - Critical Radiant Flux2.4 ADHESIVES AND CONC

7、RETE PRIMER2.5 MOLDINGS2.6 TAPE2.7 COLOR, TEXTURE, AND PATTERNPART 3 EXECUTION3.1 SURFACE PREPARATION3.2 MOISTURE AND ALKALINITY TESTS3.3 PREPARATION OF CONCRETE SUBFLOOR3.4 INSTALLATION3.4.1 Broadloom Installation3.4.2 Modular Tile Installation3.4.3 Entrance Carpet Installation3.4.4 Stretch-in Inst

8、allation3.5 CLEANING AND PROTECTION3.5.1 Cleaning3.5.2 Protection3.6 REMNANTS3.7 MAINTENANCE3.7.1 Extra Materials3.7.2 Maintenance Service- End of Section Table of Contents -SECTION 09 68 00 Page 2Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-*USAC

9、E / NAVFAC / AFCEC / NASA UFGS-09 68 00 (November 2013)-Preparing Activity: USACE SupersedingUFGS-09 68 00 (May 2010)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated October 2013*SECTION 09 68 00CARPETING11/13*NOTE: This guide specification covers the requirements f

10、or broadloom carpet, modular tile carpet, and entrance carpet.Adhere to UFC 1-300-02 Unified Facilities Guide Specifications (UFGS) Format Standard when editing this guide specification or preparing new project specification sections. Edit this guide specification for project specific requirements b

11、y adding, deleting, or revising text. For bracketed items, choose applicable items(s) or insert appropriate information.Remove information and requirements not required in respective project, whether or not brackets are present.Comments, suggestions and recommended changes for this guide specificati

12、on are welcome and should be submitted as a Criteria Change Request (CCR).*PART 1 GENERAL*NOTE: Carpet containing recovered material is designated in 40 CFR 247.12 and subsequent Recovered Materials Advisory Notices (RMAN) as an affirmative procurement item. Designers should give preference to produ

13、cts containing recovered material when price, performance, and availability meet project requirements.Options to consider include:a. Use of polyester carpet fiber face, polyethylene terephthalate resin. (A justification is required when polyester fiber is specified in lieu of polyethylene terephthal

14、ate (PET) fiber).SECTION 09 68 00 Page 3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-b. Use of carpet cushion containing recovered materials.c. Use of nylon fiber with recycled content.d. Use of nylon carpet with backing containing recovered carpe

15、t.e. Use of a program that reconditions and restores old carpet for re-use.f. Use of programs to send old carpet and existing carpet waste back to mills for recycling, rather than to landfills.Edit paragraph Physical Characteristics within this section and Section 02 41 00 DEMOLITION AND DECONSTRUCT

16、ION as necessary. If submittals are added or deleted in the SUBMITTALS paragraph, make sure the description of the submittal in the text (corresponding paragraph) is also revised accordingly.*1.1 REFERENCES*NOTE: This paragraph is used to list the publications cited in the text of the guide specific

17、ation. The publications are referred to in the text by basic designation only and listed in this paragraph by organization, designation, date, and title.Use the Reference Wizards Check Reference feature when you add a RID outside of the Sections Reference Article to automatically place the reference

18、 in the Reference Article. Also use the Reference Wizards Check Reference feature to update the issue dates.References not used in the text will automatically be deleted from this section of the project specification when you choose to reconcile references in the publish print process.*The publicati

19、ons listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS (AATCC)AATCC 107 (2009; E 2010) Colorfastness to WaterAATCC 134 (2011) Electrostatic Prop

20、ensity of CarpetsAATCC 16 (2004; E 2010) Colorfastness to LightSECTION 09 68 00 Page 4Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AATCC 165 (2008; E 2011) Colorfastness to Crocking: Textile Floor Coverings - Crockmeter MethodAATCC 174 (2011) Anti

21、microbial Activity Assessment of CarpetsASTM INTERNATIONAL (ASTM)ASTM D1335 (2012) Standard Test Method for Tuft Bind of Pile Yarn Floor CoveringsASTM D1667 (2005; R 2011) Flexible Cellular Materials - Poly (Vinyl Chloride) Foam (Closed-Cell)ASTM D297 (2013) Rubber Products - Chemical AnalysisASTM D

22、3278 (1996; R 2011) Flash Point of Liquids by Small Scale Closed-Cup ApparatusASTM D3574 (2011) Standard Test Methods for Flexible Cellular MaterialsSlab, Bonded, and Molded Urethane FoamsASTM D3676 (2013) Rubber Cellular Cushion Used for Carpet or Rug UnderlayASTM D5793 (2013) Binding Sites Per Uni

23、t Length or Width of Pile Yarn Floor CoveringsASTM D5848 (2010; E 2010) Mass Per Unit Area of Pile Yarn Floor CoveringsASTM D6859 (2011) Standard Test Method for Pile Thickness of Finished Level Pile Yarn Floor CoveringsASTM E2129 (2010) Standard Practice for Data Collection for Sustainability Asses

24、sment of Building ProductsASTM E648 (2010; E 2011) Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy SourceCARPET AND RUG INSTITUTE (CRI)CRI CIS (2011) Carpet Installation StandardINTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO)ISO 2551 (1981) M

25、achine-made Textile Floor Coverings - Determination of Dimensional Changes Due to the Effects of Varied Water and Heat ConditionsTHE WOOLMARK COMPANY (WBI)Woolmark (1964) Certification for Use of 100 Percent WoolSECTION 09 68 00 Page 5Provided by IHSNot for ResaleNo reproduction or networking permit

26、ted without license from IHS-,-,-U.S. GREEN BUILDING COUNCIL (USGBC)LEED NC (2009) Leadership in Energy and Environmental Design(tm) New Construction Rating SystemU.S. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION (NARA)16 CFR 1630 Standard for the Surface Flammability of Carpets and Rugs (FF 1-70)40

27、 CFR 247 Comprehensive Procurement Guideline for Products Containing Recovered Materials1.2 SYSTEM DESCRIPTION1.2.1 Local/Regional MaterialsSubmit documentation indicating distance between manufacturing facility and the project site. Indicate distance of raw material origin from the project site. In

28、dicate relative dollar value of local/regional materials to total dollar value of products included in project.1.2.2 Environmental Data*NOTE: ASTM E2129 provides for detailed documentation of the sustainability aspects of products used in the project. This level of detail may be useful to the Contra

29、ctor, Government, building occupants, or the public in assessing the sustainability of these products.*Submit documentation indicating type of biobased material in product and biobased content. Indicate relative dollar value of biobased content products to total dollar value of products included in

30、project. Submit Table 1 of ASTM E2129 for the following products: _. Submit documentation indicating relative dollar value of rapidly renewable materials to total dollar value of products included in project.1.2.3 SchedulingInstall carpet systems after the installation and ventilation period of mate

31、rials or finishes which have high short-term emissions of VOCs, formaldehyde, particulates, or other air-borne compounds which may be adsorbed by or settle on the carpet tiles, including _.1.3 SUSTAINABILITY REQUIREMENTS*NOTE: The bracketed items are representative of LEED material documentation and

32、 requirements that may apply to this project. These items should be edited to reflect the project requirements.*Materials in this technical specification may contribute towards contract SECTION 09 68 00 Page 6Provided by IHSNot for ResaleNo reproduction or networking permitted without license from I

33、HS-,-,-compliance with sustainability requirements.1.3.1 LEED REQUIREMENTSSee Section 01 33 29 LEED DOCUMENTATION for project LEED NC local/regional materials, low-emitting materials, recycled content, _ and rapidly renewable materials requirements.1.3.2 EPA Comprehensive Procurement GuidelinesSee S

34、ection 01 62 35 RECYCLED/RECOVERED/BIOBASED MATERIALS for requirements associated with EPA designated products.1.3.3 USDA BiobasedSee Section 01 62 35 RECYCLED/RECOVERED/BIOBASED MATERIALS for requirements associated with USDA Biobased designated products.1.4 SUBMITTALS*NOTE: Review submittal descri

35、ption (SD) definitions in Section 01 33 00 SUBMITTAL PROCEDURES and edit the following list to reflect only the submittals required for the project.The Guide Specification technical editors have designated those items that require Government approval, due to their complexity or criticality, with a “

36、G.“ Generally, other submittal items can be reviewed by the Contractors Quality Control System. Only add a “G” to an item, if the submittal is sufficiently important or complex in context of the project.For submittals requiring Government approval on Army projects, a code of up to three characters w

37、ithin the submittal tags may be used following the “G“ designation to indicate the approving authority. Codes for Army projects using the Resident Management System (RMS) are: “AE“ for Architect-Engineer; “DO“ for District Office (Engineering Division or other organization in the District Office); “

38、AO“ for Area Office; “RO“ for Resident Office; and “PO“ for Project Office. Codes following the “G“ typically are not used for Navy, Air Force, and NASA projects.Choose the first bracketed item for Navy, Air Force and NASA projects, or choose the second bracketed item for Army projects.*Government a

39、pproval is required for submittals with a “G“ designation; submittals not having a “G“ designation are for Contractor Quality Control approval. information only. When used, a designation following the “G“ designation identifies the office that will review the submittal for the Government. Submit the

40、 following in accordance with Section 01 33 00 SUBMITTAL PROCEDURES:SECTION 09 68 00 Page 7Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SD-02 Shop DrawingsInstallation Drawings; G; G, _Moldings; G; G, _SD-03 Product DataCarpet; G; G, _Carpet Cushi

41、on; G; G, _Moldings; G; G, _Physical Characteristics; (LEED NC)Local/Regional Materials; (LEED NC)Environmental DataSD-04 SamplesCarpet; G; G, _Moldings; G; G, _Carpet Cushion; G; G, _SD-06 Test ReportsMoisture and Alkalinity Tests; G; G, _SD-07 CertificatesCarpetRegulatory RequirementsSD-08 Manufac

42、turers InstructionsSurface PreparationInstallationSD-10 Operation and Maintenance DataCarpet; G; G, _Cleaning and Protection; G; G, _Maintenance ServiceSD-11 Closeout SubmittalsLEED DocumentationLocal/Regional Materials; (LEED NC)1.5 QUALITY ASSURANCE*NOTE: Synthetic carpet fiber, backing, cushion,

43、adhesive, seam sealants, floor preparation chemicals, and treatment for natural and synthetic carpet fibers (mothproofing, anti-microbial, etc.) are all potential sources of VOCs in indoor air. Using low-VOC products contributes to the following LEED credit: EQ4. Include VOC submittal if pursuing this LEED credit, and coordinate with Section 01 33 29 LEED(tm) DOCUMENTATION.*SECTION 09 68 00 Page 8Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Provide the Carpet a