ARMY UFGS-09 65 00-2010 RESILIENT FLOORING.pdf

《ARMY UFGS-09 65 00-2010 RESILIENT FLOORING.pdf》由会员分享，可在线阅读，更多相关《ARMY UFGS-09 65 00-2010 RESILIENT FLOORING.pdf（23页珍藏版）》请在麦多课文档分享上搜索。

1、*USACE / NAVFAC / AFCESA / NASA UFGS-09 65 00 (August 2010)-Preparing Activity: USACE SupersedingUFGS-09 65 00 (February 2009)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated July 2010*SECTION TABLE OF CONTENTSDIVISION 09 - FINISHESSECTION 09 65 00RESILIENT FLOORING

2、08/10PART 1 GENERAL1.1 REFERENCES1.2 SYSTEM DESCRIPTION1.2.1 Local/Regional Materials1.2.2 Environmental Data1.2.3 Fire Resistance Requirements1.2.4 Other Submittal Requirements1.3 SUBMITTALS1.4 SUSTAINABLE DESIGN CERTIFICATION1.5 DELIVERY, STORAGE, AND HANDLING1.6 ENVIRONMENTAL REQUIREMENTS1.7 SCHE

3、DULING1.8 WARRANTY1.9 EXTRA MATERIALSPART 2 PRODUCTS2.1 VINYL COMPOSITION TILE TYPE A_2.2 SHEET VINYL FLOORING TYPE A_2.3 RUBBER TILE TYPE A_2.4 RUBBER SHEET FLOORING TYPE A _2.5 SOLID VINYL TILE TYPE A_2.6 SHEET LINOLEUM TYPE A_2.7 LINOLEUM TILE TYPE A_2.8 CORK2.9 WALL BASE2.10 INTEGRAL COVE BASE2.

4、11 STAIR TREADS, RISERS AND STRINGERS2.12 FEATURE STRIP2.13 MOULDING2.14 ADHESIVES2.15 SURFACE PREPARATION MATERIALS2.16 POLISH/FINISH2.17 CAULKING AND SEALANTS2.18 MANUFACTURERS COLOR, PATTERN AND TEXTURESECTION 09 65 00 Page 1Provided by IHSNot for ResaleNo reproduction or networking permitted wit

5、hout license from IHS-,-,-PART 3 EXECUTION3.1 EXAMINATION3.2 SURFACE PREPARATION3.3 MOISTURE, ALKALINITY AND BOND TESTS3.4 PLACING VINYL COMPOSITION, LINOLEUM AND SOLID VINYL TILES3.5 PLACING SHEET VINYL FLOORING3.6 PLACING SHEET LINOLEUM FLOORING3.7 PLACING RUBBER TILE3.8 PLACING RUBBER SHEET FLOOR

6、ING3.9 PLACING CORK3.10 PLACING FEATURE STRIPS3.11 PLACING MOULDING3.12 PLACING WALL BASE3.13 PLACING STAIR TREADS, RISERS, AND STRINGERS3.14 PLACING INTEGRAL COVED BASE3.15 CLEANING3.16 WASTE MANAGEMENT3.17 PROTECTION- End of Section Table of Contents -SECTION 09 65 00 Page 2Provided by IHSNot for

7、ResaleNo reproduction or networking permitted without license from IHS-,-,-*USACE / NAVFAC / AFCESA / NASA UFGS-09 65 00 (August 2010)-Preparing Activity: USACE SupersedingUFGS-09 65 00 (February 2009)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated July 2010*SECTIO

8、N 09 65 00RESILIENT FLOORING08/10*NOTE: This guide specification covers the requirements for resilient floor coverings, base materials, and accessory items.Edit this guide specification for project specific requirements by adding, deleting, or revising text. For bracketed items, choose applicable it

9、ems(s) or insert appropriate information.Remove information and requirements not required in respective project, whether or not brackets are present.Comments and suggestions on this guide specification are welcome and should be directed to the technical proponent of the specification. A listing of t

10、echnical proponents, including their organization designation and telephone number, is on the Internet.Recommended changes to a UFGS should be submitted as a Criteria Change Request (CCR).*PART 1 GENERAL*NOTE: Resilient flooring may be used over wood subfloor provided that the subfloor underside is

11、well ventilated and the installation conforms to the manufacturers recommendations. Note that not all products are recommended for installation over panel type underlayment.Flooring such as nonslip tile is not included in this specification; appropriate wording must be added when it is required.Show

12、 location of resilient flooring, including types, on the drawings.*SECTION 09 65 00 Page 3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-1.1 REFERENCES*NOTE: This paragraph is used to list the publications cited in the text of the guide specificatio

13、n. The publications are referred to in the text by basic designation only and listed in this paragraph by organization, designation, date, and title.Use the Reference Wizards Check Reference feature when you add a RID outside of the Sections Reference Article to automatically place the reference in

14、the Reference Article. Also use the Reference Wizards Check Reference feature to update the issue dates.References not used in the text will automatically be deleted from this section of the project specification when you choose to reconcile references in the publish print process.*The publications

15、listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.ASTM INTERNATIONAL (ASTM)ASTM D 4078 (2002; R 2008) Water Emulsion Floor PolishASTM D 5603 (2001; R 2008) Rubber Compounding Materials - Recycled Vu

16、lcanizate Particulate RubberASTM E 2129 (2005) Standard Practice for Data Collection for Sustainability Assessment of Building ProductsASTM E 648 (2009a) Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy SourceASTM F 1066 (2004) Standard Specificati

17、on for Vinyl Composition Floor TileASTM F 1303 (2004; R 2009) Sheet Vinyl Floor Covering with BackingASTM F 1344 (2004; R 2009e1) Rubber Floor TileASTM F 1482 (2004; R 2009e1) Installation and Preparation of Panel Type Underlayments to Receive Resilient FlooringASTM F 1700 (2004) Solid Vinyl Floor T

18、ileASTM F 1859 (2004; R 2009e1) Rubber Sheet Floor SECTION 09 65 00 Page 4Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Covering Without BackingASTM F 1860 (2004; R 2009e1) Rubber Sheet Floor Covering With BackingASTM F 1861 (2008) Resilient Wall B

19、aseASTM F 1869 (2009) Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium ChlorideASTM F 1913 (2004) Vinyl Sheet Floor Covering Without BackingASTM F 2034 (2008) Sheet Linoleum Floor CoveringASTM F 2169 (2002; R 2008) Resilient Stair TreadsASTM F 2170 (2009) Determini

20、ng Relative Humidity in Concrete Floor Slabs in situ ProbesASTM F 2195 (2007) Linoleum Floor TileASTM F 710 (2008) Standard Practice for Preparing Concrete Floors to Receive Resilient FlooringGREEN SEAL (GS)GS-36 (2000) Commercial AdhesivesGREENGUARD ENVIRONMENTAL INSTITUTE (GEI)GEI Greenguard Stand

21、ards for Low Emitting ProductsINTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO)ISO 3813 (2004) Resilient Floor Coverings - Cork Floor TilesSCIENTIFIC CERTIFICATION SYSTEMS (SCS)SCS Scientific Certification Systems (SCS)Indoor AdvantageSOUTH COAST AIR QUALITY MANAGEMENT DISTRICT (SCAQMD)SCAQMD Rul

22、e 1168 (1989; R 2005) Adhesive and Sealant ApplicationsU.S. GREEN BUILDING COUNCIL (USGBC)LEED (2002; R 2005) Leadership in Energy and Environmental Design(tm) Green Building Rating System for New Construction (LEED-NC)SECTION 09 65 00 Page 5Provided by IHSNot for ResaleNo reproduction or networking

23、 permitted without license from IHS-,-,-1.2 SYSTEM DESCRIPTION1.2.1 Local/Regional Materials*NOTE: Using local materials can help minimize transportation impacts, including fossil fuel consumption, air pollution, and labor. Using materials harvested and manufactured within a 800 km (500 mile) radius

24、 from the project site contributes to the following LEED credit: MR5. Coordinate with Section 01 33 29 LEED(tm) DOCUMENTATION. Use second option if Contractor is choosing local materials in accordance with Section 01 33 29 LEED(tm) DOCUMENTATION. First option will not be used for USACE projects. Arm

25、y projects will include second option only if pursuing this LEED credit.*Use materials or products extracted, harvested, or recovered, as well as manufactured, within a 800 _ km 500 _ mile radius from the project site, if available from a minimum of three sources. See Section 01 33 29 LEED(tm) DOCUM

26、ENTATION for cumulative total local/recycled material requirements. Flooring materials may be locally available. Flooring and accessories may contain post-consumer or post-industrial recycled content.1.2.2 Environmental DataSubmit Table 1 of ASTM E 2129 for the following products: _.1.2.3 Fire Resis

27、tance Requirements*NOTE: Choice of critical radiant flux level as it applies to building type and area of application will be made in accordance with the latest edition of UFC 3-600-01 and NFPA 101. Wherever the use of Class II (0.22) watts finish is required, Class I (0.45) watts will be permitted.

28、 Critical radiant flux will be a minimum average of 0.45 watts when used in corridors in bachelor enlisted quarters, bachelor officer quarters, hospital, child care centers, temporary lodging facilities, and new construction detention and correctional facilities. Generally the critical radiant flux

29、will be a minimum of 0.22 for corridors of other type facilities. Where an approved automatic sprinkler system is installed, Class II interior floor finish may be used where Class I floor finish is required, and where Class II is required, no critical radiant flux rating is required. Omit paragraph

30、if not applicable.*Provide a minimum average critical radiant flux of 0.22 0.45 watts per square centimeter for flooring in corridors and exits when tested in accordance with ASTM E 648.SECTION 09 65 00 Page 6Provided by IHSNot for ResaleNo reproduction or networking permitted without license from I

31、HS-,-,-1.2.4 Other Submittal Requirements*NOTE: Drawings are required for projects with floor patterns.*The following shall be submitted in accordance with LEED:a. documentation indicating percentage of post-industrial and post-consumer recycled content per unit of product. Indicate relative dollar

32、value of recycled content products to total dollar value of products included in project.b. documentation indicating distance between manufacturing facility and the project site. Indicate distance of raw material origin from the project site. Indicate relative dollar value of local/regional material

33、s to total dollar value of products included in project.c. documentation indicating type of biobased material in product and biobased content. Indicate relative dollar value of biobased content products to total dollar value of products included in project.d. documentation relative to local/regional

34、 materials credit in accordance with LEED Reference Guide. Include in LEED Documentation Notebook.e. documentation relative to recycled content credit in accordance with LEED Reference Guide. Include in LEED Documentation Notebook.f. documentation relative to low-emitting materials credit in accorda

35、nce with LEED Reference Guide. Include in LEED Documentation Notebook.g. documentation relative to rapidly renewable materials credit in accordance with LEED Reference Guide. Include in LEED Documentation Notebook.1.3 SUBMITTALS*NOTE: Review submittal description (SD) definitions in Section 01 33 00

36、 SUBMITTAL PROCEDURES and edit the following list to reflect only the submittals required for the project. Submittals should be kept to the minimum required for adequate quality control.A “G” following a submittal item indicates that the submittal requires Government approval. Some submittals are al

37、ready marked with a “G”. Only delete an existing “G” if the submittal item is not complex and can be reviewed through the Contractors Quality Control system. Only add a “G” if the submittal is sufficiently important or complex in context of the project.For submittals requiring Government approval on

38、 Army projects, a code of up to three characters within the submittal tags may be used following the “G“ designation to indicate the approving authority. Codes for Army projects using the Resident SECTION 09 65 00 Page 7Provided by IHSNot for ResaleNo reproduction or networking permitted without lic

39、ense from IHS-,-,-Management System (RMS) are: “AE“ for Architect-Engineer; “DO“ for District Office (Engineering Division or other organization in the District Office); “AO“ for Area Office; “RO“ for Resident Office; and “PO“ for Project Office. Codes following the “G“ typically are not used for Na

40、vy, Air Force, and NASA projects.Choose the first bracketed item for Navy, Air Force and NASA projects, or choose the second bracketed item for Army projects.*Government approval is required for submittals with a “G“ designation; submittals not having a “G“ designation are for Contractor Quality Con

41、trol approval. information only. When used, a designation following the “G“ designation identifies the office that will review the submittal for the Government. Submit the following in accordance with Section 01 33 00 SUBMITTAL PROCEDURES:SD-02 Shop DrawingsResilient Flooring and Accessories; G; G,

42、_SD-03 Product DataResilient Flooring and Accessories; G; G, _Adhesives; (LEED)Vinyl Composition TileSheet Vinyl FlooringRubber TileRubber Sheet FlooringSolid Vinyl TileCement-Fiber BoardWall BaseStair Treads, Risers and Stringers Local/Regional Materials Environmental Data Sheet Linoleum Linoleum T

43、ileCorkCertificationSD-04 SamplesResilient Flooring and Accessories; G; G, _SD-06 Test ReportsMoisture, Alkalinity and Bond Tests; G; G, _SD-08 Manufacturers InstructionsSurface Preparation; G; G, _Installation; G; G, _SD-10 Operation and Maintenance DataResilient Flooring and Accessories; G; G, _SECTION 09 65 00 Page 8Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SD-11 Closeout Submittals Local/Regional MaterialsResilient Flooring and AccessoriesAdhesivesSh