ARMY UFGS-09 64 29-2010 WOOD STRIP FLOORING.pdf

《ARMY UFGS-09 64 29-2010 WOOD STRIP FLOORING.pdf》由会员分享，可在线阅读，更多相关《ARMY UFGS-09 64 29-2010 WOOD STRIP FLOORING.pdf（11页珍藏版）》请在麦多课文档分享上搜索。

1、*USACE / NAVFAC / AFCESA / NASA UFGS-09 64 29 (August 2010)-Preparing Activity: USACE SupersedingUFGS-09 64 29 (October 2006)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated July 2010*SECTION TABLE OF CONTENTSDIVISION 09 - FINISHESSECTION 09 64 29WOOD STRIP FLOORING

2、08/10PART 1 GENERAL1.1 REFERENCES1.2 SYSTEM DESCRIPTION1.2.1 Sustainable Design Requirements1.2.1.1 Local/Regional Materials1.2.1.2 Environmental Data1.2.2 Forest Stewardship Council (FSC) Certification1.2.3 Sustainable Design Certification1.3 SUBMITTALS1.4 DELIVERY, STORAGE, AND HANDLING1.5 ENVIRON

3、MENTAL REQUIREMENTS1.6 SCHEDULINGPART 2 PRODUCTS2.1 STRIP FLOORING2.1.1 General Requirements2.1.2 Bamboo2.2 NAILS2.3 RESILIENT PADS2.4 WALL BASE2.5 MOISTURE BARRIER2.6 CLIPS, ANCHOR CHANNELS AND INSULATIONPART 3 EXECUTION3.1 SURFACE CONDITIONS3.2 INSTALLATION3.2.1 Gymnasium Floors3.2.1.1 Wood Sleepe

4、rs3.2.1.2 Steel Channels3.2.2 Handball Court Floor and Walls3.2.3 Squash and Handball Court Walls3.2.3.1 Wood Supports3.2.3.2 Steel SupportsSECTION 09 64 29 Page 1Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-3.3 SANDING3.4 PROTECTION- End of Secti

5、on Table of Contents -SECTION 09 64 29 Page 2Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-*USACE / NAVFAC / AFCESA / NASA UFGS-09 64 29 (August 2010)-Preparing Activity: USACE SupersedingUFGS-09 64 29 (October 2006)UNIFIED FACILITIES GUIDE SPECIFI

6、CATIONSReferences are in agreement with UMRL dated July 2010*SECTION 09 64 29WOOD STRIP FLOORING08/10*NOTE: This guide specification covers the requirements for wood strip flooring for gymnasiums, handball and squash courts, and other special purpose applications.Edit this guide specification for pr

7、oject specific requirements by adding, deleting, or revising text. For bracketed items, choose applicable items(s) or insert appropriate information.Remove information and requirements not required in respective project, whether or not brackets are present.Comments and suggestions on this guide spec

8、ification are welcome and should be directed to the technical proponent of the specification. A listing of technical proponents, including their organization designation and telephone number, is on the Internet.Recommended changes to a UFGS should be submitted as a Criteria Change Request (CCR).*PAR

9、T 1 GENERAL1.1 REFERENCES*NOTE: This paragraph is used to list the publications cited in the text of the guide specification. The publications are referred to in the text by basic designation only and listed in this paragraph by organization, designation, date, and title.Use the Reference Wizards Ch

10、eck Reference feature when you add a RID outside of the Sections Reference Article to automatically place the SECTION 09 64 29 Page 3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-reference in the Reference Article. Also use the Reference Wizards Ch

11、eck Reference feature to update the issue dates.References not used in the text will automatically be deleted from this section of the project specification when you choose to reconcile references in the publish print process.*The publications listed below form a part of this specification to the ex

12、tent referenced. The publications are referred to within the text by the basic designation only.ASTM INTERNATIONAL (ASTM)ASTM E 2129 (2005) Standard Practice for Data Collection for Sustainability Assessment of Building ProductsFOREST STEWARDSHIP COUNCIL (FSC)FSC STD 01 001 (2000) Principles and Cri

13、teria for Forest StewardshipGREENGUARD ENVIRONMENTAL INSTITUTE (GEI)GEI Greenguard Standards for Low Emitting ProductsMAPLE FLOORING MANUFACTURERS ASSOCIATION (MFMA)MFMA GS (1999) Guide Specifications for Maple Flooring SystemsNOFMA: THE WOOD FLOORING MANUFACTURERS ASSOCIATION (NOFMA)NOFMA Grading R

14、ules (1999) Official Flooring Grading RulesSCIENTIFIC CERTIFICATION SYSTEMS (SCS)SCS Scientific Certification Systems (SCS)Indoor AdvantageU.S. GREEN BUILDING COUNCIL (USGBC)LEED (2002; R 2005) Leadership in Energy and Environmental Design(tm) Green Building Rating System for New Construction (LEED-

15、NC)1.2 SYSTEM DESCRIPTION*NOTE: Wood strip flooring is very sensitive to ambient humidity conditions since all wood flooring will expand and contract as relative humidity varies. In order to keep the flooring manufacturers warranty valid after installation, SECTION 09 64 29 Page 4Provided by IHSNot

16、for ResaleNo reproduction or networking permitted without license from IHS-,-,-the areas in which the wood floors are installed must be adequately ventilated with natural or mechanical air circulation at all times during the life of the flooring.If prior experience at the site indicates that relativ

17、e humidity during sustained heating periods will fall below 35 percent, the office in charge of building maintenance should provide equipment to introduce moisture into the floored area when required; conversely, if relative humidity increases to 50 percent or higher at any time, measures should be

18、taken to dry the floored area, including turning on the heat.At sites with humidity problems, the maintenance of the flooring may require: 1) The design of a localized HVAC system to also react to and automatically control ambient humidity conditions through the life of the flooring; or 2) Continuou

19、s monitoring of relative humidity with on the spot corrective actions, as needed, without altering the HVAC system. These alternatives could be very expensive or impractical. The designer, in the absence of local experience, should coordinate with local manufacturers to specify compatible floorings

20、which have performed well locally; that is, the designer should check gymnasiums in the area when building a gymnasium floor; the same for handball courts, etc. Of course, the designer has the option of purchasing commercially available floating or sleeper systems specifically designed to reduce the

21、 possibility of buckling and cupping brought on by moisture buildup or specifying other types of flooring when a cost analysis (including all HVAC variations) indicates that wood strip flooring is not economical.*This specification is written to allow the Contractor to build wood strip floorings for

22、 gymnasiums, handball and squash courts, and other special purpose applications but does not preclude the installation of competitive, manufacturer standard, integrated systems.1.2.1 Sustainable Design Requirements1.2.1.1 Local/Regional Materials*NOTE: Using local materials can help minimize transpo

23、rtation impacts, including fossil fuel consumption, air pollution, and labor. Using materials harvested and manufactured within a 800 km (500 mile) radius from the project site contributes to the following LEED credit: MR5. Coordinate with Section 01 33 29 LEED(tm) DOCUMENTATION. Use second option i

24、f Contractor is choosing local materials in accordance with Section 01 33 29 LEED(tm) DOCUMENTATION. Use second option for USACE SECTION 09 64 29 Page 5Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-projects. Army projects Will include option only i

25、f pursuing this LEED credit.*Use materials or products extracted, harvested, or recovered, as well as manufactured, within a 800 _ km 500 _ mile radius from the project site, if available from a minimum of three sources. See Section 01 33 29 LEED(tm) DOCUMENTATION for cumulative total local material

26、 requirements. Flooring materials may be locally available. Submit documentation indicating distance between manufacturing facility and the project site. Indicate distance of raw material origin from the project site. Indicate relative dollar value of local/regional materials to total dollar value o

27、f products included in project.1.2.1.2 Environmental Data*NOTE: ASTM E 2129 provides for detailed documentation of the sustainability aspects of products used in the project. This level of detail may be useful to the Contractor, Government, building occupants, or the public in assessing the sustaina

28、bility of these products.*Submit Table 1 of ASTM E 2129 for the following products: _.1.2.2 Forest Stewardship Council (FSC) Certification*NOTE: Use of FSC-certified wood contributes to the following LEED credit: MR7. Coordinate with Section 01 33 29 LEED(tm) DOCUMENTATION.*Use FSC-certified wood wh

29、ere specified. Provide letter of certification signed by lumber supplier. Indicate compliance with FSC STD 01 001 and identify certifying organization. Submit FSC certification numbers; identify each certified product on a line-item basis. Submit copies of invoices bearing the FSC certification numb

30、ers.1.2.3 Sustainable Design CertificationProduct shall be third party certified by GEI Greenguard Indoor Air Quality Certified, SCS Scientific Certification Systems Indoor Advantage or equal. Certification shall be performed annually and shall be current.1.3 SUBMITTALS*NOTE: Review submittal descri

31、ption (SD) definitions in Section 01 33 00 SUBMITTAL PROCEDURES and edit the following list to reflect only the submittals required for the project. Submittals should be kept to the minimum required for adequate quality control.A “G” following a submittal item indicates that the submittal requires G

32、overnment approval. Some submittals are already marked with a “G”. Only SECTION 09 64 29 Page 6Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-delete an existing “G” if the submittal item is not complex and can be reviewed through the Contractors Qua

33、lity Control system. Only add a “G” if the submittal is sufficiently important or complex in context of the project.For submittals requiring Government approval on Army projects, a code of up to three characters within the submittal tags may be used following the “G“ designation to indicate the appr

34、oving authority. Codes for Army projects using the Resident Management System (RMS) are: “AE“ for Architect-Engineer; “DO“ for District Office (Engineering Division or other organization in the District Office); “AO“ for Area Office; “RO“ for Resident Office; and “PO“ for Project Office. Codes follo

35、wing the “G“ typically are not used for Navy projects.Choose the first bracketed item for Navy, Air Force and NASA projects, or choose the second bracketed item for Army projects.*Government approval is required for submittals with a “G“ designation; submittals not having a “G“ designation are for C

36、ontractor Quality Control approval. information only. When used, a designation following the “G“ designation identifies the office that will review the submittal for the Government. Submit the following in accordance with Section 01 33 00 SUBMITTAL PROCEDURES:SD-02 Shop DrawingsSquash and Handball C

37、ourt Walls; G; G, _SD-03 Product DataLocal/Regional Materials; (LEED)Environmental DataBamboo; (LEED)InstallationCertificationSD-04 SamplesStrip FlooringSD-07 CertificatesForest Stewardship Council (FSC) Certification; (LEED)1.4 DELIVERY, STORAGE, AND HANDLINGDeliver materials to the site in origina

38、l unopened packages, bundles or containers and with all labels intact. Store flooring in fully covered, well ventilated areas protected from extreme changes in temperature and humidity. Flooring shall be maintained at an average moisture content of 6 to 9 percent. Temperature and humidity in the sto

39、rage area shall closely approximate the temperature and humidity of the rooms in which the flooring SECTION 09 64 29 Page 7Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-is to be installed.1.5 ENVIRONMENTAL REQUIREMENTS*NOTE: The values stated in th

40、e guide specification for moisture content of the flooring and for the humidity and temperature of the space where the flooring will be installed are those which are generally suitable. When local experience has proven that values differing from those included in the guide specification are necessar

41、y because of geographical location or seasonal weather conditions, appropriate values will be substituted for the values stated in the guide specification.*Provide permanent heating and air conditioning, installed and working, in rooms where wood flooring is to be installed or adequate arrangements

42、for ventilation and temperature controls. The temperature shall be maintained at 14 to 27 degrees C 55 to 80 degrees F and the humidity shall be maintained at 40 _ percent as recommended by the manufacturer starting not less than 3 days prior to beginning the installation of flooring and continuing

43、throughout the remainder of the contract period.1.6 SCHEDULINGStrip flooring work shall be scheduled after any other work which would raise the moisture content of the flooring or damage the finished surface of the flooring.PART 2 PRODUCTS2.1 STRIP FLOORING*NOTE: Designer will select appropriate species and will permit maximum competition wherever possible; however, gymnasiums will be limited to hard maple. Flooring of 25 mm (33/32 inch) thickness should be co