ARMY UFGS-09 64 23-2010 WOOD PARQUET FLOORING.pdf

《ARMY UFGS-09 64 23-2010 WOOD PARQUET FLOORING.pdf》由会员分享，可在线阅读，更多相关《ARMY UFGS-09 64 23-2010 WOOD PARQUET FLOORING.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、*USACE / NAVFAC / AFCESA / NASA UFGS-09 64 23 (August 2010)-Preparing Activity: USACE SupersedingUFGS-09 64 23 (May 2009)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated July 2010*SECTION TABLE OF CONTENTSDIVISION 09 - FINISHESSECTION 09 64 23WOOD PARQUET FLOORING08

2、/10PART 1 GENERAL1.1 REFERENCES1.2 SUBMITTALS1.3 SUSTAINABLE DESIGN CERTIFICATION1.4 DELIVERY, STORAGE, AND HANDLING1.5 ENVIRONMENTAL REQUIREMENTS1.6 SCHEDULING1.7 WARRANTYPART 2 PRODUCTS2.1 FLOORING MATERIALS2.1.1 Laminated Block Flooring2.1.2 Slat Block Flooring2.1.3 Solid Block Flooring2.1.3.1 Gr

3、ading2.1.3.2 Construction2.1.3.3 Dimensions2.1.3.4 Moisture Content2.1.3.5 Finish2.1.4 Premolded Cork Strips2.1.5 Accessories and Supporting Materials2.1.5.1 Wax Finish2.1.5.2 Asphalt Saturated Felt2.1.5.3 Adhesive2.1.5.4 Primer2.1.5.5 Shoe Molds2.2 FLOORING SYSTEMS2.2.1 Flooring on Concrete Slabs2.

4、2.2 Flooring on Subflooring UnderlaymentPART 3 EXECUTION3.1 PREPARATION OF SURFACES3.1.1 Concrete SlabsSECTION 09 64 23 Page 1Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-3.1.2 Underlayment Subflooring3.1.3 Adhesive-Applied Wood Flooring on Concre

5、te Slab3.1.4 Nailed Wood Flooring on Subflooring Underlayment3.1.5 Adhesive-Applied Wood Flooring on Subflooring Underlayment3.2 INSTALLATION3.2.1 Flooring on Concrete Slabs3.2.2 Flooring on Subflooring Underlayment3.2.3 Expansion Spaces3.2.4 Shoe Molds3.3 SANDING AND FINISHING SLAT SOLID BLOCK FLOO

6、RING3.3.1 Sanding3.3.2 Finishing3.4 PROTECTION- End of Section Table of Contents -SECTION 09 64 23 Page 2Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-*USACE / NAVFAC / AFCESA / NASA UFGS-09 64 23 (August 2010)-Preparing Activity: USACE Superseding

7、UFGS-09 64 23 (May 2009)UNIFIED FACILITIES GUIDE SPECIFICATIONSReferences are in agreement with UMRL dated July 2010*SECTION 09 64 23WOOD PARQUET FLOORING08/10*NOTE: This guide specification covers the requirements for wood parquet flooring systems.Edit this guide specification for project specific

8、requirements by adding, deleting, or revising text. For bracketed items, choose applicable items(s) or insert appropriate information.Remove information and requirements not required in respective project, whether or not brackets are present.Comments and suggestions on this guide specification are w

9、elcome and should be directed to the technical proponent of the specification. A listing of technical proponents, including their organization designation and telephone number, is on the Internet.Recommended changes to a UFGS should be submitted as a Criteria Change Request (CCR).*PART 1 GENERAL*NOT

10、E: On the drawings, show:1. Location and extent of wood parquet flooring.2. Where flooring is to be installed on concrete slab, indicate elevation of the top(s) of concrete slab.3. Locations of equipment, columns, and other permanent obstructions adjoining flooring and around which flooring is to be

11、 laid.4. Floor pattern that differs from conventional checkerboard pattern and is not defined by file sample.SECTION 09 64 23 Page 3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-5. Profile of shoe mold.*1.1 REFERENCES*NOTE: This paragraph is used t

12、o list the publications cited in the text of the guide specification. The publications are referred to in the text by basic designation only and listed in this paragraph by organization, designation, date, and title.Use the Reference Wizards Check Reference feature when you add a RID outside of the

13、Sections Reference Article to automatically place the reference in the Reference Article. Also use the Reference Wizards Check Reference feature to update the issue dates.References not used in the text will automatically be deleted from this section of the project specification when you choose to r

14、econcile references in the publish print process.*The publications listed below form a part of this specification to the extent referenced. The publications are referred to within the text by the basic designation only.APA - THE ENGINEERED WOOD ASSOCIATION (APA)APA E30 (2005) Engineered Wood Constru

15、ction GuideASTM INTERNATIONAL (ASTM)ASTM D 226/D 226M (2009) Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and WaterproofingASTM E 1333 (1996; R 2002) Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large ChamberASTM E 648 (200

16、9a) Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy SourceGREENGUARD ENVIRONMENTAL INSTITUTE (GEI)GEI Greenguard Standards for Low Emitting ProductsHARDWOOD PLYWOOD AND VENEER ASSOCIATION (HPVA)HPVA EF (2009) American National Standard for Enginee

17、red Wood FlooringSECTION 09 64 23 Page 4Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOFMA: THE WOOD FLOORING MANUFACTURERS ASSOCIATION (NOFMA)NOFMA Grading Rules (1999) Official Flooring Grading RulesSCIENTIFIC CERTIFICATION SYSTEMS (SCS)SCS Scie

18、ntific Certification Systems (SCS)Indoor Advantage1.2 SUBMITTALS*NOTE: Review submittal description (SD) definitions in Section 01 33 00 SUBMITTAL PROCEDURES and edit the following list to reflect only the submittals required for the project. Submittals should be kept to the minimum required for ade

19、quate quality control.A “G” following a submittal item indicates that the submittal requires Government approval. Some submittals are already marked with a “G”. Only delete an existing “G” if the submittal item is not complex and can be reviewed through the Contractors Quality Control system. Only a

20、dd a “G” if the submittal is sufficiently important or complex in context of the project.For submittals requiring Government approval on Army projects, a code of up to three characters within the submittal tags may be used following the “G“ designation to indicate the approving authority. Codes for

21、Army projects using the Resident Management System (RMS) are: “AE“ for Architect-Engineer; “DO“ for District Office (Engineering Division or other organization in the District Office); “AO“ for Area Office; “RO“ for Resident Office; and “PO“ for Project Office. Codes following the “G“ typically are

22、not used for Navy, Air Force, and NASA projects.Choose the first bracketed item for Navy, Air Force and NASA projects, or choose the second bracketed item for Army projects.*Government approval is required for submittals with a “G“ designation; submittals not having a “G“ designation are for Contrac

23、tor Quality Control approval. information only. When used, a designation following the “G“ designation identifies the office that will review the submittal for the Government. Submit the following in accordance with Section 01 33 00 SUBMITTAL PROCEDURES:SD-03 Product DataHardwood Parquet FlooringCer

24、tificationSD-04 SamplesSECTION 09 64 23 Page 5Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Hardwood Parquet FlooringSD-07 CertificatesFlooring Materials; G; G, _SD-08 Manufacturers InstructionsAccessories and Supporting MaterialsAdhesiveFinishPrem

25、olded cork stripsPolyurethane coatingWax FinishSD-10 Operation and Maintenance DataFlooring Materials; G; G, _1.3 SUSTAINABLE DESIGN CERTIFICATIONProduct shall be third party certified by GEI Greenguard Indoor Air Quality Certified, SCS Scientific Certification Systems Indoor Advantage or equal. Cer

26、tification shall be performed annually and shall be current.1.4 DELIVERY, STORAGE, AND HANDLINGDeliver materials to the building site in original, unopened packages, bundles, or containers. Protect materials against dampness during shipment and after delivery. Store materials under cover in a well v

27、entilated building where materials will not be exposed to extreme changes of temperature and humidity. Do not store materials in buildings under construction until all wet-applied building materials are dry. Do not open packages, bundles, or containers until the flooring is to be installed. Remove r

28、ejected material from Government property.1.5 ENVIRONMENTAL REQUIREMENTS*NOTE: Control of temperature and humidity prior to laying flooring is necessary to prevent buckling and cupping. Since climatic conditions vary due to geographical location and the trend is toward natural ventilation for energy

29、 conservation, it is imperative to check with flooring manufacturer and local installers to determine correct temperature and humidity ranges for the project area.*Store the parquet flooring in the building or space where the parquet flooring is to be laid for a minimum of 3 days to allow absorbed m

30、oisture to evaporate. Separate the wood parquet so that all pieces are exposed to the air during this 3-day period to allow uniform acclimation. Maintain the temperature of the building or space between 21 and 10 _ and _ degrees C 70 and 50 _ and _ degrees F, and maintain the relative humidity betwe

31、en 30 and 65 _ and _ percent. Maintain the preceding temperatures and humidity conditions throughout the installation period.SECTION 09 64 23 Page 6Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-1.6 SCHEDULINGParquet flooring work shall be scheduled

32、 after completion of any other work which would raise the moisture content of the flooring or damage the finished surface of the flooring.1.7 WARRANTYProvide manufacturers standard performance guarantees or warranties that extend beyond a one-year period.PART 2 PRODUCTS2.1 FLOORING MATERIALS*NOTE: S

33、election of the type of flooring to be used should be based on the appropriate project design requirements, availability, and relative cost. The method of specifying the pattern is optional, but the “file sample“ is recommended for projects for which the design is sensitive.Acrylic impregnated hardw

34、ood floors are recommended for commercial type facilities. Prefinished urethane and stain/wax prefinishes are normally for residential or light commercial usage.Choice of critical radiant flux level as it applies to building type and area of application will be made in accordance with the latest edi

35、tion of MIL-HDBK 1008B or NFPA 101. Wherever the use of Class II (0.22 watts) finish is required, Class I (0.45 watts) will be permitted.Critical radiant flux will be a minimum average of 0.45 watts when used in corridors in bachelor enlisted quarters, bachelor officer quarters, hospital, child care

36、 centers, temporary lodging facilities, and new construction detention and correctional facilities. Generally the critical radiant flux will be a minimum of 0.22 for corridors of other type facilities. Where an approved automatic sprinkler system is installed, Class II interior floor finish may be u

37、sed where Class I floor finish is required, and where Class II is required, no critical radiant flux rating is required. Omit sentence if not applicable.*Hardwood parquet flooring shall conform to NOFMA Grading Rules. The flooring shall match the color and pattern of the sample on file at the office

38、 of the Contracting Officer. Pattern shall be _ as indicated. Flooring shall contain no more than 0.02 parts per million of formaldehyde when tested in accordance with ASTM E 1333. Hardwood flooring in corridors and exits shall have a minimum average critical radiant flux of 0.22 0.45 watts per squa

39、re centimeter when tested in accordance with ASTM E 648. Submit manufacturers descriptive data, documentation stating physical characteristics and flame resistance, installation instructions SECTION 09 64 23 Page 7Provided by IHSNot for ResaleNo reproduction or networking permitted without license f

40、rom IHS-,-,-and two _ samples of each type of parquet flooring. Samples shall be minimum 300 x 300 mm 12 x 12 inches. Submit statement from the manufacturer attesting that the materials meet the specified requirements. The statement shall be dated after the award of the contract, stating the Contrac

41、tors name and address, showing the name of the project and location, and listing the specific requirements being certified. Submit Data Package 1 in accordance with Section 01 78 23 OPERATION AND MAINTENANCE DATA.2.1.1 Laminated Block Flooring*NOTE: The species are listed in descending order of wear

42、 resistance and hardness. Limit the species, based on quality required and compatibility with color desired or selected for the file sample. Size of units will depend on pattern selected and should be stated.*HPVA EF, plain face, factory finished. Fabricate face veneer of each block from hard maple,

43、 red oak, white oak, birch, ash, beech, walnut, or cherry. Flooring units shall be _ mm inches by _ mm inches.2.1.2 Slat Block Flooring*NOTE: The species are listed in descending order of wear resistance and hardness. Limit the species, based on quality required and compatibility with color desired or selected for the file sample. Size of units will depend on pattern selected and should be stated.*APA E30, unfinished, Select and