ARMY MIL-T-53055 C-1991 TANK 3000 GALLON AND 4600 GALLON FABRIC COLLAPSIBLE DRINKING WATER SEMI-TRAILER MOUNTED《半挂车装3000加仑和4600加仑可收缩帆布饮用水储运罐》.pdf

《ARMY MIL-T-53055 C-1991 TANK 3000 GALLON AND 4600 GALLON FABRIC COLLAPSIBLE DRINKING WATER SEMI-TRAILER MOUNTED《半挂车装3000加仑和4600加仑可收缩帆布饮用水储运罐》.pdf》由会员分享，可在线阅读，更多相关《ARMY MIL-T-53055 C-1991 TANK 3000 GALLON AND 4600 GALLON FABRIC COLLAPSIBLE DRINKING WATER SEMI-TRAILER MOUNTED《半挂车装3000加仑和4600加仑可收缩帆布饮用水储运罐》.pdf（29页珍藏版）》请在麦多课文档分享上搜索。

1、i I I I I I I I I I I I t I l I I I I I I I I t I I I I t t I I I I I I I I I I MIL-T-53055C 54 9997906 0492359 2 I 3 - I INCH-POUND I MIL-T-53055C(ME) 16 September 1991 SUPERSEDING 22 January 1991 6 June 1989 MIL-T-OO53055B MIL-T-53055A (ME) MILITARY SPECIFICATION TANK, 3000 GALLON AND 4600 GALLON

2、FABRIC, COLLAPSIBLE, DRINKING WATER, SEMI-TRAILER MOUNTED Construction and Decorative. Plastic Sheet and Strip, Thin Gauge, Polyolefin. Bolt, (Screw), Lag. Bolt, Square Neck, Tee Head. Nut, Square, Hexagon Cap, Slotted, Castellated, Clinch, Knurled, and Welding. Washer, Flat (Plain). Wood Preservati

3、ve, Water Repellant. Boxes, Wood, Cleated Plywood. Boxes, Wood, Nailed and Lockcorner. Boxes, Shipping, Fiberboard. Cushioning Material, Cellulosic. Cushioning Material, Resilient Low Density, Unicellular, Polypropylene Foam. Tape, Packaging, Waterproof. - Sealing Compound Thread and Gasket, Fuel Oi

4、l, and Water Resistant. - Anodic Coatings for Aluminum and Aluminum Alloys. - Cloth, Coated, Polyester or Nylon, Waterproof. - Repair Kit and Repair Kit Components, for Collapsible Fabric Tanks, Drums, and Boats. - Colors Used in Government Procurement. - Sampling Procedures and Tables for Inspectio

5、n by Attributes, - Marking for Shipment and Storage. - Identification Marking of U.S. Military Property. - Quality of Members for Containers and Pallets, 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-, MIL-T-53055C 54 0b 0492LbL O ,. MIL-STD-1472

6、 MS27019 MS 27028 MS 49 O00 MS49002 - Human Engineering Design Criteria for Military Systems, Equipment, and Facilities. - Coupling Assembly, Quick Disconnect, Cam-Locking Type. - Coupling Half, Quick Disconnect, Cam-Locking Type, Cap, Dust, Type IX. - Reducer, Male by Female and Female by Male, Qui

7、ck Disconnect, Cam and Locking, Type XI. - Reducer, EPT by Quick Disconnect, Cam-Locking Type, Female, Type XIII. (Unless otherwise indicated, copies of federal and military specifications, -1. standards, and handbooks are available from the Standardization Documents Order Desk, Building 4D, 700 Rob

8、bins Avenue, Philadelphia, PA 19111-5094.) .Tk 2.1.2 Other Government documents. drawings. and publications. The following other Government documents, drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified, the issues are those cited in the

9、 solicitation. DRAWINGS ME 1322539096 1322539135 1322539139 - Nozzle, Distribution, Water. - Hose Assembly, Rubber. - Swivel, Hose. (Copies of drawings required by contractors in connection with specific , acquisition functions should be obtained from the USA Belvoir Research, Development and Engine

10、ering Center, ATTN: STRBE-FSH, Fort Belvoir, VA 22060-5606.) FOOD AND DRUG ADMINISTRATION (FDA) Code of Federal Kegulations, Title 49, 313.101-102. Code of Federal Regulations, Title 21, Part 177.2600, Chapter I. (The Code of Federal Regulations (CFR) and the Federal Register (FR) are for sale on a

11、subscription basis by the Superintendent of Documents, US Government Printing Office, Washington, DC 20402. When indicated, reprints of certain regulations may be obtained from the Federal Agency responsible for issuance thereof. ) 3 Provided by IHSNot for ResaleNo reproduction or networking permitt

12、ed without license from IHS-,-,-TECOM TOP 2-2-610 - 18 July 1980 - Side Slope and Gradeability. (Application for copies should be addressed to the US Army Test and Evaluation Command, DRSTE-AD-M, Aberdeen Proving Ground, MD 21005.) 2.2 Non-Government publications. The following documents form a part

13、 of this specification to the extent specified herein. Unless otherwise specified, the issues of the documents which are DoD adopted are those listed in the issue of the DODISS cited in the solicitation. Unless otherwise specified, the issues of documents not listed in the DODISS are the issues cite

14、d in the solicitation (see 6.2). AMERICAN NATIONAL STANDARDS INSTITUTE, INC. (ANSI) H35.1 - Aluminum, Alloy and Temper Designation Systems for. (Application for copies should be addressed to the American National Standards Institute, Inc., 1430 Broadway, New York, NY 10018.) AMERICAN PUBLIC HEALTH A

15、SSOCIATION, INC. (APHA) Standard Methods for Examination of Water, parts 207 and 211B, paragraph 4.6.1. MIL-T-53055C 54 m 999790b 0492Lb2 E! m I MIL-T-53055C(ME) I (Application for copies should be addressed to the American Public Health Association, Inc., 1015 18th St, N.W., Washington, DC 20036.)

16、AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) A 167 - Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet and Strip. B 26 - Aluminum-Alloy Sand Castings. B 85 - Aluminum-Alloy Die Castings. B 108 - Aluminum-Alloy Permanent Mold Castings. D 2000 - Rubber Products in Automotive Applica

17、tions, Classification D 3953 - Strapping, Flat Steel and Seals. D 4675 - Selection and Use of Flat Strapping Materials. Systems for. (Application for copies should be addressed to the American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103.) AMERICAN WOOD PRESERVERS ASSO

18、CIATION (AWPA) Cl - All Timber Products - Preservative Treatment by Pressure c2 - Lumber, Timbers, Bridge Ties and Mine Ties - Preservative Processes. Treatment by Pressure Process. 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-i I I I t I l i I

19、l i i i l 1 I 1 I MIL-T-53055C 54 9999906 0492163 4 = c9 - Plywood - Preservative Treatment by Pressure Process. (Application should be addressed to the American Wood Preservers Association, P. O. Box 849, Stevensville, MD 21666.) NATIONAL SANITATION FOUNDATION (NSF) NSF Standard 61 - Drinking Water

20、 System Components - Health Effects (Application for copies should be addressed to National Sanitation Foundation, 3475 Plymouth Rd, P.O. Box 1468, Ann Arbor, Michigan 48106.) (Non-Government standards and other publications are normally available from the organizations that prepare or distribute th

21、e documents. These documents also may be available in or through libraries or other informational services.) 2.3 Order of precedence. In the event of a conflict between the text of this document and the references cited herein, (except for related associated detail specifications, specification shee

22、ts or military standards), the text of this document takes precedence. supersedes applicable laws and regulations unless a specific exemption has been obtained. Nothing in this document, however, 3. REQUIREMENTS 3.1 Description. The tank shall consist of an elastomeric coated multi-ply fabric or mul

23、ti-ply cord with fittings, flatbed cloth (optional), repair items, hose, tiedown straps and hardware, carrying sling, duffel bag, and accessories (see figure 5). 3.2 First article. Unless otherwise specified (see 6.2), a sample shall be subjected to first article inspection (see 6.3) in accordance w

24、ith 4.3. 3.3 Medical requirements. 3.3.1 Potability. The liner and all surfaces that contact drinking water shall conform to the Code of Federal Regulations, Food and Drugs, title 21, chapter 1, part 177.2600 for contact with food (the compounds listed in title 21, chapter 1, part 177.1020, 177.1030

25、, 177.1050 or 177.1480 shall not be acceptable materials) or shall be either tested or listed as approved for use with potable water by the National Sanitation Foundation (NSF), Underwriters Laboratory, or Safe Water Additives Institute in accordance with NSF Standard 61. 3.3.2 Taste and odor. The t

26、ank shall conform to the APHA Standard Methods for the Examination of Water and Wastewater for taste and odor. The material shall not impart odor to chlorinated water such that the threshold odor number exceeds two. . that the taste rating scale exceeds four (see 4.5.2.1). The material shall not imp

27、art taste to chlorinated water such 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- I MIL-T-53055C 54 99Ob 0492Lb4 b MIL-T-53055C(ME) 3.4 Material. Materials shall be as specified herein. Materials not specified shall be selected by the contractor

28、 and shall be subject to all provisions of this specification. 3.4.1 Material deterioration prevention and control, The tanks shall be fabricated from compatible materials, inherently corrosion and deterioration resistant or treated to provide protection against the various forms of corrosion and de

29、terioration that may be encountered in any of the applicable storage and operating environments to which the tank may be exposed. 3.4.2 Identification of materials and finishes. The contractor shall identify the specific material, material finish or treatment for use with components and subcomponent

30、s, and shall make information available, upon request, to the contracting officer or designated representative, 3.4.3 Recovered materials. For the purpose of this requirement, recovered materials are those materials which have been collected from solid waste and reprocessed to become a Cource of raw

31、 materials, as distinguished from virgin raw materials. The components, pieces and parts incorporated in the tank may be newly fabricated from recovered materials to the maximum extent practicable, provided the tank produced meets all other requirements of this specification. Used, rebuilt or remanu

32、factured components, pieces and parts shall not be incorporated in the tanks. 3.4.4 Inner liner rubber ComDound. The liner rubber compound shall be a solid, noncellular rubber compound conforming to 3.3, capable of withstanding storage at ambient temperatures from +160 OF to -25 OF. 3.4.5 Outer cove

33、r rubber. compound. The outer cover rubber compound shall conform to ASTM D 2000, composition M3BC610A14C12F17G21. 3.4.6 Allovs of tank fittings. Alloy and temper designations of wrought aluminum alloys and aluminum alloys in the form of castings shall be in accordance with ANSI H 35.1. UNS A14130,

34、UNS A13600 or UNS A05180 for die castings; ASTM B 108, UNS A03560-T6 for permanent and semipermanent mold castings; or ASTM B 26, UNS A13560-T6 or UNS A07120-T5 for sand castings. conforming to ASTM A 167, UNS S30400 may be used. Cast aluminum alloy shall conform to ASTM B 85, Corrosion resisting st

35、eel 3.4.7 Protective coatings. Aluminum alloy tank fittings shall be anodized in accordance with MIL-A-8625, type II, class 2, dyed to approximate tank color. The minimum thickness shall be at least 0.0004 inches (10 micrometers). 3.5 Tank performance. 3.5.1 4600 gallon tank, The tank shall be capab

36、le of being completely filled while secured on the M872 trailer. transporting between 4570 and 4700 gallons of water. drained by gravity in 30 minutes or less without the use of a pump The tank shall be capable of safely The tank shall be 6 ? Provided by IHSNot for ResaleNo reproduction or networkin

37、g permitted without license from IHS-,-,-MIL-T-53055C 54 9997706 0472165 8 W (see 4.5.2.5). years at ambient temperatures from +160 OF to -25 OF without damage or leakage when subsequently filled with water (see 4.5.2.3 and 4.5.2.4). The tank shall be capable of filling at +125 OF to +32 OF ambient

38、temperature. The tank shall be designed to transport the potable water at 5 I1 psig pressure. tank color shall approximate color chip 33446 of FED-STD-595. The tank shall withstand a hydrostatic test pressure of 15 psig for 20 minutes without any leakage, blistering, peeling, delamination, slippage,

39、 fabric damage, or any sign of deterioration (see 4.5.2.2 and 4.5.2.8). The tank and components shall withstand folded storage for 20 The 3.5.2 3000 gallon tank. The tank shall be capable of being completely filled while secured on the M872 trailer, M871 trailer, and M127A2C trailer. The tank shall

40、be capable of transporting between 3000 and 3090 gallons of water. use of a pump (see 4.5.2.5). The tank and components shall withstand folded storage for 20 years at ambient temperature from +160 OF to -25 OF without damage or leakage when subsequently filled with water (see4.5.2.3 and 4.5.2.4). Th

41、e tank shall be capable of filling at +125 OF to +32 OF ambient temperature. 5 21 psig pressure. FED-STD-595. for 20 minutes without any leakage, blistering peeling, delamination, slippage, fabric damage, or any signs of deterioration (see 4.5.2.2 and 4.5.2.8). The tank shall be drained by gravity i

42、n 30 minutes or less without the The tank shall be designed to transport the potable water at The tank shall withstand a hydrostatic test pressure of 15 psig The tank color shall approximate color chip 33446 of 3.5.3 Road travel. 3.5.3.1 Highway. The tanks, when completely empty or when full, (3000

43、or 4600 gallons) shall be capable of travel of at least 55 miles over smooth, hard surface primary roads at sustained speeds up to 55 miles per hour (mph) without shifting, leaking, or any sign of deterioration (see 4.5.2.6). 3.5.3.2 Cross country. A full 3000 gallon tank shall be capable of travel

44、over unimproved roads and open, rolling, and hilly cross-country terrain at speeds up to 30 mph without shifting, weakening, leaking, or any sign of deterioration (see 4.5.2.7). 3.5.3.3 Gradeabilitv. A full 3000 gallon tank and vehicle system (see 3.12) shall be able to negotiate grades up to 30 per

45、cent both in forward and reverse travel, and be able to brake to full stop and hold steady on the grade without shifting, leaking, or any sign of deterioration (see 4.5.2.7). 3.5.3.4 Side sloDe Derformance. A truck and trailer (see 3.12) carrying a full 3000 gallon tank with 5 21 psi internal pressu

46、re shall be capable of controlled steering while running a sine-wave pattern on the horizontal length of a 30 percent grade side slope without the tank shifting leaking, or showing any sign of deterioration (see 4.5.2.7). 3.6 Accessories. The 4600-gallon tank shall be furnished with accessory items

47、1 through 6. The 3000 gallon tank shall be furnished with accessory 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-53055C 54 W 9999906 0492Lbb T items 1 through 11 (see figure 5). Items 1 and 4 shall approximate color chip a 33446 of FED-STD

48、-595. 1, 2. 3. 4. 5. 6. 7. 8. 9. 10 * 11. I tem Conformance Tiedown assembly, * Suction hose, 10 ft. length, (97403) 1322539135-3 4-inch diameter, cap and plug attached by chain. Carrying sling used to place the tank in and out of the shipping crate. Duffel bag for tiedown assembly. Repair kit, for

49、collapsible MIL-R-52255 fabric tanks, drums, and boats, type II. Adhesive repair kit, Adhesives, patches, (Expiration date shall be applicators, pouch, and marked on the adhesive containers(s). cam-lock, 4-inch to 2-inch. female, Type XIII. Nozzle, distribution, (97403) 1322539096 potable water. length, 2-inch diameter, cap.and plug attached by chain. Code of Federal Regulation 49 CFR 393.100-102. instructions for 5 repairs. Reducer, female to male,