ARMY MIL-STD-1472 G-2012 HUMAN ENGINEERING.pdf
《ARMY MIL-STD-1472 G-2012 HUMAN ENGINEERING.pdf》由会员分享,可在线阅读,更多相关《ARMY MIL-STD-1472 G-2012 HUMAN ENGINEERING.pdf(381页珍藏版)》请在麦多课文档分享上搜索。
1、 METRIC MIL-STD-1472G 11 January 2012 SUPERSEDING MIL-STD-1472F 23 August 1999 DEPARTMENT OF DEFENSE DESIGN CRITERIA STANDARD HUMAN ENGINEERING AMSC N/A AREA HFAC DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.Provided by IHSNot for ResaleNo reproduction or networki
2、ng permitted without license from IHS-,-,-MIL-STD-1472G ii FOREWORD 1. This standard is approved for use by all Departments and Agencies of the Department of Defense. 2. This standard establishes general human engineering criteria for design and development of military systems, equipment, and facili
3、ties. Human engineering is one of seven domains of Human-systems integration (as defined in the DoD 5000 series) and is synonymous with Human factors engineering. The purpose of this standard is to present human engineering design criteria, principles, and practices to be applied in the design of sy
4、stems, equipment, and facilities so as to: a. Achieve required performance by operator, control, and maintenance personnel. b. Achieve required manpower readiness for system performance. c. Achieve required reliability of personnel-equipment combinations. d. Foster design standardization within and
5、among systems. 3. This standard does not alter requirements for system development participation of human engineering specialists to interpret and implement these practices and to provide solutions to human engineering problems which arise and which are not specifically covered herein. 4. Requiremen
6、ts herein are expressed in the International System of Units (SI). As a convenience, the metric units are accompanied by their approximate customary system equivalents (in parentheses). Angular measure is expressed in degrees unless it is necessary to specify fractions of a degree where milliradians
7、 are used. 5. MIL-STD-1472 has not had a thorough technical review since the late 1980s. MIL-STD-1472D was promulgated in March 1989, and hence addressed the level of technology that existed through 1988 or possibly 1987. The “E” revision, promulgated in 1996, was mostly cosmetic; the text was chang
8、ed to a non-proportional font in order to reduce white space. The “F” revision, promulgated in 1999, consisted mainly of moving the anthropometric data from MIL-STD-1472 to MIL-HDBK-759, but little else. As a result, requirements and design criteria contained in previous versions of MIL-STD-1472 may
9、 no longer be applicable to todays technology. The operational benefits of emerging technologies may be limited due to the out-of-date design criteria. Tomorrows systems will depend on greater cognitive processing on the part of the human operator, maintainer, and support personnel. Portable or wear
10、able computers are likely to be commonplace. New display concepts such as virtual reality, haptic (touch sensing), and three-dimensional are receiving a great deal of interest, as are voice, pointing, gesture, and eye-blink control systems. Technology, if misapplied, will impose human performance re
11、quirements that cannot be satisfied. Many technologies are evolving rapidly; the human is not. The benefits of new technologies may not be realized if one fails to consider human capabilities and limitations. The changes made in the “G” revision over the previous version are substantial. The organiz
12、ational structure of the standard was revamped to group similar material in the same section of the document. Obsolete provisions (e.g., reference to dot-matrix printers) were deleted, out-of-date provisions were updated to reflect the latest research, and new provisions were added to address emergi
13、ng technologies. See 6.4 for a summary of changes to the present “G” revision. 6. Comments, suggestions, or questions on this document should be addressed to: Commander, U.S. Army Aviation and Missile Command, ATTN: RDMR-SET, 5400 Fowler Road, Redstone Arsenal, AL 35898-5000 or emailed to streviewam
14、rdec.army.mil. Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-1472G iii CON
15、TENTS PARAGRAPH TITLE PAGE 1. SCOPE . 1 1.1 Scope 1 1.2 Purpose. . 1 1.3 Application. 1 1.4 Manufacturing tolerances. 1 2. APPLICABLE DOCUMENTS 1 2.1 General. 1 2.2 Government documents. 1 2.2.1 Specifications, standards, and handbooks. . 1 2.2.2 Other Government documents, drawings, and publication
16、s. 2 2.3 Non-Government publications. 3 2.4 Order of precedence. 5 3. DEFINITIONS. 6 3.1 Acronyms used in this standard. 6 3.2 Abbreviations used in this standard. 7 3.3 Definitions used in this standard. . 8 3.3.1 Alarm. 8 3.3.2 Alert. 8 3.3.3 Boot (accelerator operation). 8 3.3.4 Boot (brake opera
17、tion). 9 3.3.5 Central 90 percent accommodation. . 9 3.3.6 Contrast ratio (CR). 9 3.3.7 Deuteranope. 9 3.3.8 Display frame. 9 3.3.9 Egocentric perspective. 9 3.3.10 Elbow (dynamic). . 9 3.3.11 Elbow (static). 9 3.3.12 Field of regard. . 9 3.3.13 Field of view. . 9 3.3.14 Font size to character heigh
18、t. . 9 3.3.15 Fuse. . 9 3.3.16 Fuze 9 3.3.17 Knee width (minimum). . 9 3.3.18 Knee width (optimum). 9 3.3.19 Level of automation. 9 3.3.20 Luminance contrast. . 10 3.3.21 Occlusion. 10 3.3.22 Pedals (minimum). . 10 3.3.23 Protanope. 10 4. GENERAL REQUIREMENTS . 10 4.1 Design objectives. 10 4.1.1 Wor
19、k environment. 10 4.1.2 Performance degradation. 10 4.1.3 User capabilities. 10 4.1.4 Task performance. . 10 4.1.5 Personnel, training, and skill requirements. . 10 4.1.6 System manpower. . 10 4.2 Standardization. . 10 4.3 Off-the-shelf equipment. 10 4.3.1 Selection. . 10 4.3.2 Modification. 10 4.3.
20、3 Redesign approval. . 10 4.4 Human engineering design. . 10 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-STD-1472G iv PARAGRAPH TITLE PAGE 4.4.1 Compliance. . 10 4.4.2 Program requirements. . 10 4.4.3 Application. 11 4.4.4 Accommodation. 11 4
21、.4.5 Human engineering requirements. . 11 4.4.6 Human engineering activities. 11 4.4.7 Design factors. . 11 4.5 Fail-safe design. . 12 4.6 Simplicity of design. 12 4.6.1 Equipment simplicity. 12 4.6.2 Training. . 12 4.7 Interaction. . 12 4.8 Safety. 12 4.8.1 System and personnel safety factors. . 12
22、 4.8.2 Design of nonmilitary-unique workplaces and equipment. 12 4.9 Ruggedness. . 12 4.10 Chemical, biological, radiological, nuclear, and high-yield explosive (CBRNE) survivability. . 12 4.10.1 CBRNE compatibility. . 12 4.10.2 Performance of mission-essential operations. 12 4.10.3 Susceptibility t
23、o reduction of inherent CBRNE hardness. . 12 4.10.3.1 CBRNE hardness verification. . 12 4.10.3.2 CBRNE hardness and maintenance. 12 4.10.4 CBRNE hardness and maintenance personnel expertise. . 12 4.11 Electromagnetic pulse hardening. 12 4.11.1 Electromagnetic pulse hardening requirements. 12 4.11.2
24、Access to EMP-hardened facilities. . 12 4.11.3 Electromagnetic barrier accessibility. 12 4.12 Automation. . 13 4.12.1 Automation of functions. . 13 4.12.2 Human involvement. 13 4.12.3 Automated function characteristics. . 13 4.12.4 Indication of operating mode. 13 4.13 Functional use of color. 13 4.
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ARMYMILSTD1472G2012HUMANENGINEERINGPDF
