ARMY MIL-PRF-63029 H-2012 MANUALS TECHNICAL REQUIREMENTS FOR OPERATOR扴 MANUALS AND CHECKLISTS FOR MANNED AIRCRAFT SYSTEMS.pdf

《ARMY MIL-PRF-63029 H-2012 MANUALS TECHNICAL REQUIREMENTS FOR OPERATOR扴 MANUALS AND CHECKLISTS FOR MANNED AIRCRAFT SYSTEMS.pdf》由会员分享，可在线阅读，更多相关《ARMY MIL-PRF-63029 H-2012 MANUALS TECHNICAL REQUIREMENTS FOR OPERATOR扴 MANUALS AND CHECKLISTS FOR MANNED AIRCRAFT SYSTEMS.pdf（203页珍藏版）》请在麦多课文档分享上搜索。

1、1 MIL-PRF-63029H (AV) 31 August 2012 S U P E R S E D I N G MIL-PRF-63029G (AV) 3 0 M a y 2 0 0 8 PERFORMANCE SPECIFICATION MANUALS, TECHNICAL: REQUIREMENTS FOR OPERATORS MANUALS AND CHECKLISTS FOR MANNED AIRCRAFT SYSTEMS This specification is approved for use by the U.S. Army Research, Development a

2、nd Engineering Command, Department of the Army, and is available for use by all departments and agencies of the Department of Defense. 1. SCOPE. 1.1 General. This specification establishes the requirements needed to prepare digital technical manuals (TMs) describing operating procedures, checklists,

3、 and maintenance test flight (MTF) manuals for operators of Army Aircraft. 1.2 Classification. The TMs to be prepared in accordance with this specification include: -10 Operators Manual -CL Operators and Crewmembers Checklist -MTF Maintenance Test Flight Manual Comments, suggestions, or questions on

4、 this document should be addressed to U.S. Army Research, Development and Engineering Command, ATTN: RDMR-SET, Redstone Arsenal, AL 35898-5000. Since contact information can change, you may want to verify the currency of this address information using the ASSIST Online database at https:/assist.dla.

5、mil. AMSC N/A AREA TMSS DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. INCH-POUND Provided by IHS Not for Resale No reproduction or networking permitted without license from IHS -,-,-MIL-PRF-63029H 2 1.3 Figures. In the event of a conflict between the text and the

6、illustrations, the text of this document takes precedence over the figures. 2. APPLICABLE DOCUMENTS. 2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This section does not include documents cited in other sections of this specification or

7、recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements documents cited in sections 3, 4, or 5 of this specification, whether or not they are listed. 2

8、.2 Government documents. 2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. DEPA

9、RTMENT OF DEFENSE STANDARD/ DEPARTMENT OF DEFENSE HANDBOOK MIL-STD-40051-2A Preparation of Digital Technical Information for Page- Based Technical Manuals MIL-HDBK-310 Global Climatic Data for Developing Military Products MIL-HDBK-38790 Printing Production of Technical Manuals (Copies of these docum

10、ents are available online at https:/assist.dla.mil/quicksearch or Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) 2.2.2 Other Government documents, drawings, and publications. The following other Government documents, drawings and publications form

11、 a part of this document to the extent specified herein. Unless otherwise specified, the issues are those cited in the solicitation or contract. ARMY REGULATIONS (AR)/ DEPARTMENT OF ARMY PAMPHLETS (DAPAM) AR 95-1 Flight Regulation AR 25-30 The Army Publishing Program AR 25-52 Authorized Abbreviation

12、s, Brevity Codes, and Acronyms DA PAM 385-10 Army Safety Program (Copies of these publications are available in electronic format through the Army Publishing Directorate website at http:/www.apd.army.mil/). Provided by IHS Not for Resale No reproduction or networking permitted without license from I

13、HS -,-,-MIL-PRF-63029H 3 FIELD MANUALS FM 3-04.203 Fundamentals of Flight FM 3-04.240 Instrument Flight for Army Aviators (Copies of these publications are available in electronic format through the Army electronic publications and forms website at http:/atiam.train.army.mil). TECHNICAL MANUALS (TM)

14、/TECHNICAL BULLETINS (TB) TB 55-9150-200-24 Engine and Transmission Oils, Fuels, and Additives for Army Aircraft TM 1-1500-328-23 Aeronautical Equipment Maintenance Management Policies and Procedures TM 55-1500-342-23 Aircraft Weight and Balance TM 750-244-1-5 Procedures for the Destruction of Aircr

15、aft and Associated Equipment to Prevent Enemy Use (Copies of these publications are available in electronic format through the Army electronic publications and forms website at https:/www.logsa.army.mil). DOD DIRECTIVES DoD Directive 5230.24 Distribution Statements on Technical Documents (Copies of

16、this publication are available in electronic format through the DoD Issuances website at http:/www.dtic.mil/whs/directives/). 2.3 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict between the text of this document and the references cited herein (excep

17、t for related specification sheets), the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 3. REQUIREMENTS. 3.1 General. This section provides the technical content requirements for the

18、 operators manuals, checklists and MTF manuals. Technical content requirements (3.5 through 3.7) shall deal with the specific technical data aspects of operators manuals, checklists and MTF manuals. The style and format requirements for the development of operators manuals, checklists and MTF manual

19、s are provided in Appendix A through Appendix E of this specification. 3.2 Selective application and tailoring. MIL-PRF-63029H contains some requirements that may not be applicable to the preparation of all technical manuals. Selective application and Provided by IHS Not for Resale No reproduction o

20、r networking permitted without license from IHS -,-,-MIL-PRF-63029H 4 tailoring of requirements contained in MIL-PRF-63029H are the responsibility of the acquiring activity and shall be accomplished through the use of the matrixes provided in Appendix A. The applicability of some requirements is als

21、o designated by one of the following statements: unless specified otherwise by the acquiring activity; as/when specified by the acquiring activity; or when specified by the acquiring or proponent activity. 3.3 Preparation of digital data for electronic delivery. Technical manual data prepared and de

22、livered digitally in accordance with this specification shall be Extensible Markup Language (XML) tagged using the Document Type Definitions (DTDs) and the XML Stylesheet Language (XSL), or style sheets. Refer to 3.3.2 for information on obtaining or accessing the DTDs and style sheets. 3.3.1 Use of

23、 the DTDs/Style sheets. The DTDs referenced in this specification interpret the technical content and structure for the functional requirements contained in this specification and are mandatory for use. The style sheets referenced herein interpret the style and format. As specified by the contractin

24、g activity, XSLs or style sheets may be used to produce final reproducible paper copy for all TMs prepared in accordance with this specification. Within this specification, when a specific tag set is to be used for data, that tag set name is identified between “” marks following the title of the par

25、agraph. 3.3.2 Obtaining the DTDs/Style sheets. The DTDs, style sheets, associated tag and attribute descriptions, which are XML constructs, maybe obtained from the AMCOM Publications website (pubsweb). Additionally available on the pubs web website are files containing documentation of the deleted,

26、changed, and added elements between the legacy XML DTD and the current XML DTD. The AMCOM Pubs web assets may be obtained from https:/pubsweb.redstone.army.mil/DTD-FOSI/DTD-N-FOSI.html. 3.4 The use of “shall”, “should”, and “may”. The use of “shall” is used to express a binding requirement. “Should”

27、 and “may” are used to express non-mandatory requirements. 3.5 Operators manual (-10). 3.5.1 General. The operators manual shall describe briefly and concisely the operation of the complete aircraft. The description of aircraft, aircraft systems, sub-systems, and components shall contain only that d

28、etail required to explain the operation, operational procedures, and checks necessary for the pilot to safely and efficiently operate the aircraft, aircraft systems, and mission equipment during flight and ground operation. 3.5.2 Hierarchical breakdown. An Operators Manual begins with: volumes (if r

29、equired), chapters, sections and subsections. Each division used should have at least two occurrences (for example where there is a Volume 1, there should be a Volume 2; where there is a Chapter 1, there should be a Chapter 2; etc.). Multiple volumes should be partitioned only between chapters. Prov

30、ided by IHS Not for Resale No reproduction or networking permitted without license from IHS -,-,-MIL-PRF-63029H 5 3.5.2.1 Volume size. Division into volumes shall occur when the number of printed pages (excluding pocket TMs) exceeds 1,000 pages or 500 sheets. Each volume shall not exceed 1,000 pages

31、 or 500 sheets. An MTF or CL (4 x 8 inches) volume shall not exceed 500 pages or 250 sheets. Foldouts are counted in page units (sheets). 3.5.2.2 Volume content. Each volume of a series shall display the TM number on its cover and all pages that make up the volume. Each volume of a series shall cont

32、ain a title block page and table of contents. The first volume shall contain a complete (including all volumes information) table of contents. 3.5.3 Chapters. Each operators manual prepared in accordance with this specification shall be divided as follows: Front Matter Chapter 1 Introduction Chapter

33、 2 Aircraft and Systems Description and Operation Chapter 3 Avionics Chapter 4 Mission Equipment Chapter 5 Operating Limits and Restrictions Chapter 6 Weight/Balance and Loading Chapter 7 Performance Data Chapter 8 Normal Procedures Chapter 9 Emergency Procedures References Abbreviations and Terms I

34、ndex Authentication Page DA Form 2028 Foldouts (if included) Provided by IHS Not for Resale No reproduction or networking permitted without license from IHS -,-,-MIL-PRF-63029H 6 Metric Conversion Chart 3.5.4 Front Matter . 3.5.4.1 Cover . Covers shall be prepared in accordance with Figure 1 (note t

35、he distribution statement). Additional detailed requirements for the front cover content information are described in 3.5.4.1.1 through 3.5.4.1.6. Following the TM title, the following notices shall be provided in the order listed below: a. TM number . b. Single volume supersedure notice for revisio

36、ns only (as applicable). c. TM title . d. National stock number (NSN) for item(s) covered. e. End Item Code (EIC) , as specified in the Army Master Data File (AMDF). f. Volume notice (as applicable). g. Export control notice warning (as applicable). h. Distribution statement . i. Destruct notice (as

37、 applicable). j. Disclosure notice (as applicable). k. Multiple-volume supersedure notice for revisions only (as applicable). l. Service nomenclature . m. Publication Data , 3.5.4.1.1 Volume notice . Multiple-volume manuals shall contain a statement identifying all volumes required to complete the m

38、anual set. 3.5.4.1.2 Export control notice . For those pubs with export controlled data, the following export control notice contained in DoD Directive 5230.24 shall be included: “WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S

39、.C., Sec 2751, et. seq.) or the Export Administration Act of 1979, as amended, Title 50, U.S.C., App. 2401 et. seq. Violations Provided by IHS Not for Resale No reproduction or networking permitted without license from IHS -,-,-MIL-PRF-63029H 7 of these export laws are subject to severe criminal pen

40、alties. Disseminate in accordance with provisions of DoD Directive 5230.25.” 3.5.4.1.3 Distribution statement . All TMs shall have a distribution statement placed on the front cover for each manual or revision. The appropriate distribution statement shall be provided by the acquiring activity (6.2)

41、as selected from DoD 5230.24. 3.5.4.1.4 Destruction notice . All TMs marked with distribution statements “B“, “C“, “D“, “E“, “F“, or “X“ shall be marked with the following destruction notice unless otherwise provided by the acquiring activity (6.2): “Destruction Notice Destroy by any method that wil

42、l prevent disclosure of contents or reconstruction of the document.” 3.5.4.1.5 Disclosure notice . Unless specified otherwise by the acquiring activity (6.2), the following disclosure notice shall be placed on the front cover of all classified and unclassified TMs except those with distribution stat

43、ement A: “This information is furnished upon the condition that it will not be released to another nation without the specific authority of the Department of the Army of the United States, that it will be used for military purposes only, that individual or corporate rights originating in the informa

44、tion, whether patented or not, will be respected, that the recipient will report promptly to the United States, any know nor suspected compromise, and that the information will be provided substantially the same degree of security afforded it by the Department of Defense of the United States. Also,

45、regardless of any other markings on the document, it will not be downgraded or declassified without written approval of the originating United States agency.“ 3.5.4.1.6 Supersedure notice . The supersedure notice shall be placed on the cover and title page when the manual is revised and supersedes a

46、ll other manuals and changes. A single manual supersedure notice shall appear immediately below the TM Number. A multi-volume manual supersedure notice shall be the last notice prior to the service nomenclature. The applicable portions of the following notice shall be used: “This manual supersedes (

47、applicable manual number) dated (date of superseded document), including all changes.” 3.5.4.2 Warning page . A warning page(s) shall include each general type of warning and warning symbol used within the TM. The warning page shall not include a word- for-word repetition of all the warnings in the

48、TM. It shall be limited to alerting the user of the different types of hazards in general terms including general hazardous subject data such as radiation, chemicals, high voltage, gas pressure, laser light, etc. that will be encountered in operating and maintaining the aircraft or equipment. The wa

49、rning page shall also include first aid data. The warning page (Figure 2) shall start on a right-hand page immediately following the cover. The warning page shall consist of the following in the order specified below: Provided by IHS Not for Resale No reproduction or networking permitted without license from IHS -,-,-MIL-PRF-63029H 8a. First aid