ARMY MIL-PRF-49137 1 D-2009 CAPACITORS FIXED ELECTROLYTIC (SOLID ELECTROLYTE) TANTALUM POLAR MOLDED NONHERMETICALLY SEALED STYLE CX01《CX01型非气密性密封模塑钽(固体电解质)电解固定极性电容器》.pdf

《ARMY MIL-PRF-49137 1 D-2009 CAPACITORS FIXED ELECTROLYTIC (SOLID ELECTROLYTE) TANTALUM POLAR MOLDED NONHERMETICALLY SEALED STYLE CX01《CX01型非气密性密封模塑钽(固体电解质)电解固定极性电容器》.pdf》由会员分享，可在线阅读，更多相关《ARMY MIL-PRF-49137 1 D-2009 CAPACITORS FIXED ELECTROLYTIC (SOLID ELECTROLYTE) TANTALUM POLAR MOLDED NONHERMETICALLY SEALED STYLE CX01《CX01型非气密性密封模塑钽(固体电解质)电解固定极性电容器》.pdf（5页珍藏版）》请在麦多课文档分享上搜索。

1、INCH-POUND MIL-PRF-49137/1D SUPERSEDING 19 February 2009 MIL-PRF-49137/1C 22 April 2004 PERFORMANCE SPECIFICATION SHEET CAPACITORS, FIXED, ELECTROLYTIC (SOLID ELECTROLYTE), TANTALUM, POLAR, MOLDED, NONHERMETICALLY SEALED, STYLE CX01 This specification is approved for use by all Departments and Agenc

2、ies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification and MIL-PRF-49137. CIRCUIT DIAGRAMDimensions Lead size Case size Diameter D .020 (0.51) Length L .020 (0.51) Dia. AWG A .120 (3.05) .310 (7.87) .020 .0015 (0.51 .040) 24

3、B .200 (5.08) .400 (10.16) ,025 .002 (0.64 .05) 22, 24 C .220 (5.59) .560 (14.22) .025 .002 (0.64 .05) 22, 24 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. 3. Metric equivalents are in parentheses. FIGURE 1. Dimensions and configuration. AMSC N/A F

4、SC 5910 Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-49137/1D 2TABLE I. Style CX01 characteristics. Type designation 1/ DC rated voltage (85C) Capacitance (nominal) DC

5、leakage (max) +25C Dissipation Factor (DF) Case size CX01D395- CX01D475- CX01D565- CX01D685- CX01D825- CX01D106- CX01D126- CX01D186- CX01D686- Volts 6 6 6 6 6 6 6 6 6 F 3.9 4.7 5.6 6.8 8.2 10.0 12.0 18.0 68.0 A 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.0 % 6 6 6 6 8 8 8 8 10 A A A A A A A B C CX01F275- CX01

6、F335- CX01F226- CX01F276- CX01F336- CX01F396- CX01F476- CX01F566- 10 10 10 10 10 10 10 10 2.7 3.3 22 27 33 39 47 56.0 1.0 1.0 2.0 2.0 2.0 5.0 5.0 5.0 6 6 8 8 8 8 8 8 A A B B B B C C CX01H156- CX01H226- CX01H276- CX01H336- 15 15 15 15 15 22 27 33 2.0 3.0 5.0 5.0 8 8 8 8 B C C C CX01J106- CX01J126- CX

7、01J156- CX01J186- 20 20 20 20 10 12 15 18 1.0 1.0 2.0 5.0 8 8 8 8 B B C C CX01K155- CX01K185- CX01K225- CX01K565- CX01K685- CX01K825- CX01K126- 25 25 25 25 25 25 25 1.5 1.8 2.2 5.6 6.8 8.2 12 1.0 1.0 1.0 1.5 1.5 2.0 3.5 6 6 6 6 6 8 8 A A A B B B C CX01M474- CX01M564- CX01M684- CX01M824- CX01M105- CX

8、01M125- CX01M275- CX01M335- CX01M395- CX01M475- CX01M685- CX01M825- CX01M106- 35 35 35 35 35 35 35 35 35 35 35 35 35 0.47 0.56 0.68 0.82 1.0 1.2 2.7 3.3 3.9 4.7 6.8 8.2 10.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 2.0 5.0 5.0 4 4 4 4 6 6 6 6 6 6 8 8 4 A A A A A A B B B B C C C See footnote at end of

9、 table. Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-49137/1D 3TABLE I. Style CX01 characteristics. Continued. Type designation 1/ DC rated voltage (85C) Capacitance (n

10、ominal) DC leakage (max) +25C Dissipation Factor (DF) Case size CX01N104- CX01N124- CX01N154- CX01N184- CX01N224- CX01N274- CX01N334- CX01N394- CX01N474- Volts 50 50 50 50 50 50 50 50 50 F 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 A 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 % 4 4 4 4 4 4 4 4 4 A A A A

11、A A A A B CX01N564- CX01N684- CX01N824- CX01N105- CX01N125- CX01N155- CX01N185- CX01N225- CX01N275- CX01N335- CX01N395- CX01N475- CX01N565- 50 50 50 50 50 50 50 50 50 50 50 50 50 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 2.0 5.0 5.0 5.0 4 4 4 4 6 6 6

12、6 6 6 6 6 6 B B B B B B B B C C C C C 1/ Complete type designation will include additional symbols indicating capacitance tolerance. REQUIREMENTS: Dimensions and configuration: See figure 1. Case material: Molded, epoxy or plastic. Leads: Solder - coated metal. DC rated voltage: See table I. Operati

13、ng temperature: -55C to +85C. DC leakage (DCL): See table I. Capacitance (cap.): See table I. Cap. tolerance: 10% (K), or 20% (M). Dissipation factor (DF): See table I. Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking p

14、ermitted without license from IHS-,-,-MIL-PRF-49137/1D 4Stability at low and high temperature: In accordance with MIL-PRF-49137. Step 1 (+25C): DCL - See table I. Cap. - Within tolerance specified in table I. DF - See table I. Step 2 (-55C): Cap - Within -15 percent of step 1 measured value. DF - 20

15、0 percent of table I. Step 3 (+25C): DCL - See table I. Cap. - Within 10 percent of step 1 measured value. DF - See table I. Step 4 (+85C): DCL - 10 times 25C limit (see table I). Cap. - Within +15 percent of step 1 measured value. DF - 150 percent of table I. Step 5 (+25C): DCL - See table I. Cap.

16、- Within 10 percent of step 1 measured value. DF - See table I. Surge voltage: In accordance with MIL-PRF-49137. DCL - See table I. Cap. - Within 10 percent of initial value. DF - See table I. Life: Method 108 of MIL-STD-202. 1,000 hours: At 25C: DCL - 200 percent of table I. Cap. - Within 5 percent

17、 of initial measured value. DF - See table I. These capacitors are intended to be used only where supplemental moisture protection is provided or for noncritical applications where hermetic moisture protection is not required. NOTES: Reference documents. In addition to MIL-PRF-49137, this specificat

18、ion sheet references the following documents. MIL-STD-202 (Copies of these documents are available online at http:/assist.daps.dla.mil/quicksearch or http:/assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094). Changes from

19、 previous issues. The margins of this specification are marked with asterisks to indicate where changes from previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned

20、 to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous issue. Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted w

21、ithout license from IHS-,-,-MIL-PRF-49137/1D 5Custodians: Preparing activity: Army - CR Army - CR Navy - EC Air Force - 85 DLA - CC Agent: DLA - CC Review activities: (Project 5910-2009-015) Navy - AS, MC, OS, SH Air Force - 19 NOTE: The activities listed above were interested in this document as of

22、 the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil . Copyright Communications - Electronics Command Provided by IHS under license with CRAINot for ResaleNo reproduction or networking permitted without license from IHS-,-,-