ARMY MIL-P-51062 B-1969 PUMP FOG OIL SMOKE GENERATOR M4《M4型烟雾发生器和油雾泵》.pdf

《ARMY MIL-P-51062 B-1969 PUMP FOG OIL SMOKE GENERATOR M4《M4型烟雾发生器和油雾泵》.pdf》由会员分享，可在线阅读，更多相关《ARMY MIL-P-51062 B-1969 PUMP FOG OIL SMOKE GENERATOR M4《M4型烟雾发生器和油雾泵》.pdf（13页珍藏版）》请在麦多课文档分享上搜索。

1、MIL-P-SLOb2B LO I 777770b 0333423 b I 4. 7s-3945 MIL-P-5 1062 5 June i969 SUPERSEDING MIL-P-OOOA(MU) 3i Marh 1966 MIL-P-5 1062 5 December 1961 MILITARY SPECIFICATION PUMP, FOG OIL, SMOKE GENERATOR, M4 This specification is mandatory for use by all De- partments and Agencies of the Department of Defe

2、nse. 1. SCOPE 1.1 This specification covers a fog oil pump for use with the ABC-m3 smoke generator. 2.1 Government documents. The follaring documents of the issue in effect on date of invitation for bids or request for proposal, form a part of this specification to the extent specified herein: SPECI

3、FICATIONS FEDERAL TT-W -5 72 - PPP-B-585 - PPP-B-591 - PPP-3-621 - PPP-B-636 - PPP-F-320 - PPP-B-O - Wood Preservative; Water Repellent. Boxe6, Wood, Wirebound. Boxes, Fiberboard, Wood-Cleated. Boxes, Wood, Cleated-Plywood. Boxes, Wood, Nailed and Lock-Corner. Box, Fiberbaird . FTberboard; Corrugate

4、d and Solid, Sheet Stock. (Container Grade), and Cut Snapes. THIS DQClJMENT CONTAINS -L. PAGES. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MILITARY MIL-P- - Preservation, ethods of. MIL-T-704 - Treatment and Painting of Materiel. MIL-F-1X)70 - F

5、og Oil. MIL-C-17504 - Coating Compound, Acrylic, Clear. MIL-L-o - Lubrication Oil, Internal Ccmbustion Engine Preservative and Break-in. MILITARY MIL-STD-lo5 - Sampling Procedures and Tables for Inspection by MIL-STD-129 - Marking for Shipment and Storage. Attributes DRAWINGS US AM MUNITIONS COMMAND

6、 EDGEWOOD ARSENAL DL31-15-1197 - Pump, Fog Oil, Woke Generator, M4 - Bill of Material. (Copies of specifications, standards, drawings and publications required by suppliers in connection with specific procurement functions should be obtained from the procuring activity or as directed by the contract

7、hg orricer . ) 2.2 Other publications. The following document forms a part of this specification to the extent specified herein. Unless otherwise indicated, the issue in effect on date of invitation for bids or request for proposal shaU apply. UNIM)IaII CLASSIFICATION COW- Uniform Freight Classifica

8、tion Ratings, Rules and Regulations. (Application for copies of these freight classification rules should be addressed to the Uniform Classification Committee, 202 Union Station, Chicago, Illinois 60606.) 2 ,-. c i. Provided by IHSNot for ResaleNo reproduction or networking permitted without license

9、 from IHS-,-,- e nIL-P-51062B 10 m O6 0333423 T m 3. REQUIREMENTS 3.1 Materials and components. 3.l.l Materials. All materials cited on Drawing DL31-15-1197 or on subsidiary drawings shall conform to the specifications listed thereon or to the specific characteristics set forth on the drawings. 3.1.

10、2 Components. All components of the pump shall conform to the specifications and drawings listed on Drawing Dm1-15-1197 and sub- sidiary drawings . 3.2 Assenibly. The pmnp shall be assembled as sham on Drawing E31-15 -ii97. 3.3 Leakage. The pump assembly shall not leak air when subjected to an inter

11、nal pressure of 25 f 10 secands when tested in accordance with 4.4.4.1. . The pump assembly shall deliver a minimum of 55 of fog oil when operated at a test pressure of shall operate freely an continuously (that is, without stopping or stalling) at test pressure for i5 with fog oil being emitted fro

12、m the ends of both the oil exhaust and oil outlet lines when tested in accordance with 4.4.4.2. 2 minutes, 3.5 Ehdurance. The pump shall operate continuously for 7 / 1 hours at the test pressure specified in 3.4. in 3.4 shall be determined at 1-hour intervals when tested in accord- ance with 4.4.4.3

13、. The rate of delivery as specified 3.6 Preproduction. Prior to the start of regular production, a preproduction sample of pumps shall be produced for examination and test in accordance with 4.3. 3.7 Workmanship. The pump and components shall be free from damage which could affect its intended use.

14、4. QUALZPY ASSURANCE PROVISIONS 4.1 Responsibility for inspection. 4.1.1 Suppliers responsibility. Unless otherwise specified in the contract or purchase order, the supplier is responsibile ror the perfom- ance of all inspection requirements as specified herein. otherwise specified in the contract o

15、r order, the suppliei. may use his Fxzept as 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-P-SLOb2B LO 97b 0333Y24 I 9 own or any other facilities suitable for the performance of the inspec- tion requirements specified herein, unless disappro

16、ved by the Government. The Government reserves the right to perfom any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to specified requirements. 4.1.2 Objective evidence . The supplier shall provide objective evid

17、ence acceptable to the ccutracting officer that the requirements of 3.1 for which specific inspection has not been providedin this specification have been satisfied. 4.2 Classification of inspections. The inspection requirements speci- fied herein are classified as follows: a) Preproduction inspecti

18、on (see 4.3) t b) Quality conformance inspection (see 4.4) 4.3 Preproduction inspection. 4.3.1 Sample. using the same methods, materials, and equipment that will be used in regular production. A preproduction sample of two pumps shall be produced 4.3.2 Inspection procedure. The pumps shall be tested

19、 in accordance with 4.4.b.1, 4.4.42 and 4.4.4.3. 4.3.3 Acceptance/re Section criteria. The preproduction pumps shall meet all the tests of this specification to be acceptable. shall obtain written approval from the contracting officer prior to starting regular production. Ilie supplier 4.4 Qua lity

20、conformance inspection. 4,4.1 Lotting. A lot shall consist of the pumps of one interfix number, produced by one manufacturer, at one plant, for the same materials, and under essentially the same manufacturing conditions. 4.4.2 samy1in.g for examination and nondestructive tests Sampling shall be cond

21、ucted in accordance with MIL-STD-lO5. For endurance test general inspection level1 shall be used. 4.4 3 nspe ction procedure 4.4.3.1 Examination and nondestructive tests. - Sample components, pump assemblies and the levels A and B prepuration ror delivery shall be examined in accordance with the cla

22、ssification of defects and with mL-s-105. For endurance test use an AQL of 2.5 percent defective. 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-d NIL-P-510628 10 W Ob 0333Ll25 3 4.4.3.2 Critical characteristics. Each pump in the lot shall be exam

23、ined for the critical characteristics listed in the classification of defects. 4.4.3.3 Classification of oefects. Defects Categories None defined Critical: AQL 1.0 percent defective Major: Inside diameter incorrect Mameter O. 9360 incorrect O-ring groove diameter or Thread incorrect Eccentricity exc

24、essive mchine finish incorrect Worloaanship (3 7) width incorrect 101 102 103 A B31-15-l244) CetePories Defects None defined Cri ti cal : Major: AQL 1.0 percent defective 101 102 103 104 105 106 Hole diameter incorrect Diameter (0.310) incorrect Machine finish incorrect Hardness incorrect Centerline

25、 of hole to shank shoulder incorrect Workmanship (3 . 7) Minor: AQL 2.5 percent defective Overdl length incorrect Plating micoing Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-4.4.3.3 Clessification of defects (continued),. (i) PUFP, fog oil, smoke

26、 generator, M4 (Dwg E31-15-1197). CsteRories Defects Acceptance standards Critical: 1 2 Major: AQL 1.0 percent defective 101 Canpment missing or in- 102 Marking missing correctly assembled AQL 2.5 percent defective - Minor: 201 Protective finish missing (3) Rod, piston (Dug B31-15-1226). Categories

27、Defects Cri tical: None defined Major: A. Mount the pump assembly on a suitable stand and connect 7-to 10-foot lengths of hose or tubing to the oil inlet, oil outlet, and oil exhaust ports. The oil inlet hose shall contain a suitable sedi- ment strainer. The oil outlet hose shall contain a metering

28、orifice with a 0.180 1 0.010-inch diameter by 1/8 / 1/32 inch long hole. hose or tubing lines into a container or type SGF2 fog oil, conforming to MIL-F-l.Z!O7O. oil and the ends of the outlet and exhause Unes above the surface of the fog oil. assembly air inlet port. Open the pump assembly bleed va

29、lve and introduce air into the pump at an initial pressure of 5 / 1 psig. When air exhausts from the bleed valve, close the valve and aperate the pump for a break-in period of i5 minutes. If necessary, initial starting or restarting of the stalled pumps, during this break-in period, may be facilitat

30、ed by manually pushing on the pump air motor rocker am. Immediately following the break-in period? without stopping the pump, the air pressure shall be re- duced to the specified test pressure. exhaust lines into a volumetrically calibrated container to determine the delivery rate of the pump. Place

31、 the Place the end of the inlet line below the surface of the fog Connect a regulated source of filtered compressed air to the pump Place the ends of the outlet and 4.4.4.3 Endurance. Operate the pump in accordance with 4.4.4.2 for the specified time, determining the delivery rate of the pump at the

32、 specified intervals. 5. PREPARATION FOR DELIVERY 5.1 Packaging and packing. All packaging and packing shall be of the minimum cube required to contain the items. 5.2 Cleaning and dryl. Before the appucation of any preservative, all surfaces to which a preservative is to be applied shall be cleaned

33、and dried in confonnance-with MIL-P-, using cleaning method C-1 and any applicable drying method Usted therein. 5.3 Preservation and packaging. kvels shall be as specified (see 6.1). 5.3.1 Level A. 5.3.1.1 Repaintingl. treated and painted in Damaged portions of paiE.ted surfaces shall be accordance

34、with MIL-T-704, type A. 11 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-3 - m flIL-P-SLOb2B LO 7779706 0333432 O 5.3.1.2 himp. All internal surfaces of the pump, including inteAal surfaces of the air chamber, shall be flushed with type P-10, type

35、I, grade 30 preservative oil conforming to MIL-L-UO, actuating the pump during this operation to insure that all internal surfaces and operating mechanisms have been coated. Threads of drain plugs shall be coated with the same type of oil and the plugs replaced and tightened. Openings into the inter

36、ior of the pump shall be covered with metal or plastic caps or plugs. Prior to the threaded openings being covered, the threaded surfaces shall be coated with type P-2 preservative compound conforming to MIL-P-. conforming to MIL-C-17504. All excess oil shall be drained. . Nameplates shall be coated

37、 with a clear acrylic coating compound 5.3.1.3 Unit packaginq. pon completion of pump preservation, the pumps shall be individually packaged within a fiberboard box conforming to ESC1 type CF, class weather-resistant variety SU,. grade 275 of PPP-B-636. fiberboard blocking fabricated from material c

38、onforming to PPP-F-320 shall be used a6 required to insure a tight package. The boxes shall be closed in accordance with the appendix to PPP-B- for exterior boxes. addition, all seams of the outer box, including the manufacturers joint, shall be sealed in accordance with the appendix of PPP-B-. shal

39、l not be strapped unless the boxes item is shipped without further protection (see 5.4.2) . internal In The boxes 5.3.2 Level C. The pump shall be cleaned and dried as specified in 5.1 and preserved in accordance with the manufacturers commercial practice. 5.4 Packing. kvels shall be as specified (s

40、ee 6.1). 5.4.1 Level A. Pumps, unit packaged as specified in 5.3, shall be packed not to exceed the gross weight limitations in snug-fitting, overseas-type containers conforming to PPP-1-585, PPP-B-591, PPP-B-601, or PPP-B-621 The boxes shall be closed and strapped in accordance with the applicable

41、container specification and the appendix thereto, using galvanized strapping. The wood boxes or wood parts thereof shall be treated with water repellent wood preservative conforming to composition A of TT-W-572. 5.4.2 Ievel B,. hmips, unit packaged as specified in 5.3.1, may be shipped as individual

42、 units without further packing. to ship two or more pumps in one shipping container, the pumps shall be packed a6 specified in 5.4.1 except that domestic-type containers shall be used, but water-repellent wood preservative treatment is not required. When it is desired 5.4.3 Level C. Pumps, packaged

43、as specified in 5.3, shall be packed to insure safe arrival at, first destination for immediate use. Containers shall comply with Uniform Freight Classification rules or regulations of other carriers applicable to the mode of transportation. Provided by IHSNot for ResaleNo reproduction or networking

44、 permitted without license from IHS-,-,-MIL-P-5 1062.13 5.5 MarkinK. tract or order, unit containers shall be marked in accordance with MIL-STD-129. Shipping containers shall be marked in accordance with Draving Dl5O-2-1. In addition to any special marking required by the con- 6 1 Ordering data. Pro

45、curement documents should specif y the following : (a) (b) (c) Preprouction. Title, number, and date of this specification. Level of preservation, packaging, and packing required. (1) (2) (3) %me allowed for suppuers to submit samples for Govern- Name and address of test facility and shipping instru

46、ction Time required for the Government to notify the suppuer ment test and evaluation after award of cantract. when testing is performed by the Government. whether to proceed with regular production. 6.2 International interest. Certain provisions of this specification are the subject of ABC internat

47、ional standardization agreement. When amendment, revision, or cancellation of this specification is proposed, the departmental custodians will inform their respective Departmental Standardization Offices so that appropriate action may be taken respecting the international agreement concerned. Custodian: Air Force - 84 Ipeview activity Air Force - 04 User activities Army - SM Navy - MC Preparing activity: -Y - Project No. 1040-0082 international interest (see section 6) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-