ARMY MIL-P-50206 (5)-2008 PROPELLANT M9 FLAKE (FOR USE IN 40MM CARTRIDGES)《(40毫米火药筒用)片状M9型推进剂》.pdf

《ARMY MIL-P-50206 (5)-2008 PROPELLANT M9 FLAKE (FOR USE IN 40MM CARTRIDGES)《(40毫米火药筒用)片状M9型推进剂》.pdf》由会员分享，可在线阅读，更多相关《ARMY MIL-P-50206 (5)-2008 PROPELLANT M9 FLAKE (FOR USE IN 40MM CARTRIDGES)《(40毫米火药筒用)片状M9型推进剂》.pdf（5页珍藏版）》请在麦多课文档分享上搜索。

1、FSC 1376 DISTIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Comments, suggestions, or questions on this document should be addressed to: Commander, US Army ARDEC, Attn: AMSRD-AAR-QES-E, Picatinny, New Jersey 07806-5000 or emailed to ardecstdznconus.army.mil. Since conta

2、ct information can change, you may want to verify the currency of this address information using the ASSIST online database at http:/assist.daps.dla.mil. MIL-P-50206 (AR) w/ AMENDMENT 5 27 June 2008 SUPERSEDING MIL-P-50206 (AR) w/ AMENDMENT 4 22 January 1998 MILITARY SPECIFICATION PROPELLANT M9, FLA

3、KE (FOR USE IN 40MM CARTRIDGES) This specification is approved for use by the Department of the Army and is available for use by all Departments and Agencies of the Department of Defense 1. SCOPE 1.1 This specification covers M9 Flake Propellant for use in 40MM cartridges (see 6.3). 2. APPLICABLE DO

4、CUMENTS 2.1 The following documents of the issue in effect on date of invitation for bids or request for proposal form a part of this specification to the extent specified herein. STANDARDS MILITARY MIL-STD-l05 Sampling Procedures and Tables for Inspection by Attributes (ABC-STD-105) MIL-STD-109 Qua

5、lity Assurance Terms and Definitions MIL-STD-129 Marking for Shipment and Storage MIL-STD-286 Propellant, Solid, Sampling, Examinations and Testing MIL-STD-652 Propellant, Solid for Cannons, Requirements and Packing MIL-STD-1168 Lot Numbering of Ammunition DRAWINGS ARMY C-122-2-1B Head Assembly, Edg

6、ewood Arsenal D8844609 Case, Cartridge, Loading Assembly, XM118, Picatinny Arsenal C9207988 Case, Cartridge, Loading Assembly, M195, Picatinny ArsenalINCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-P-50206 (AR) w/ AMENDMENT 5 2 C886462

7、2 Separation Charge Assembly for Fuze, M536 40MM Cartridge M397 9922230 Case, Cartridge, Practice M212 (Copies of specifications, standards, drawings, and publications required by suppliers in connection with specific procurement functions should be obtained from the procuring activity or as directe

8、d by the contracting officer). 2.2 Other publications. The following document forms a part of this specification to the extent specified herein. Un1ess otherwise indicated, the issue in effect on date of invitation for bids shall apply. CODE OF FEDERAL REGULATIONS Title 49 Transportation, Parts 49 C

9、FR 171-179 The Interstate Commerce Commission Rules are now a part of the Code of Federal Regulations, available from the Superintendent of Documents, U. S. Government Printing office, Washington, D.C., 20402. Order. for the above publication should cite “49 CFR 171-179, (latest revision).” 3. REQUI

10、REMENTS 3.1 Materials. The propellant shall be M9, Flake, conforming to the requirements of Standard MIL-STD-652, and drawings (dwg) listed in Table I, except that the graphite content shall be 0.4 percent, maximum (max.). TABLE I Cartridge Designation Drawing M118 D8844609 Head Assembly C122-2-18 M

11、195 C9207988 M397 C8864622 M212 9322230 3.2 Form. The propellant shall be in the form of solid discs when examined as specified in 4.3.2. 3.3 Physical properties. The physica1 properties shall be as specified in Table II when tested as specified in 4.3.1 and 4.3.2. TABLE II Diameter, inches (advisor

12、y) 0.035 Thickness, inches (advisory) 0.00325 Bulk density lbs/cu.ft., min. 30.0 3.4 Closed Bomb, Relative Quickness and Relative Force. The M9 propellant shall have a relative quickness and a relative force of 100 plus or minus 3 percent when tested as specified in 4.3.3. 3.5 Workmanship. The best

13、commercial practices shall be used in the formulation of propellant furnished under this specification, and all other applicable documents. The propellant and its standard Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-P-50206 (AR) w/ AMENDMENT

14、5 3 ingredients shall be protected from the action of direct sunlight and acid fumes. No reground propellant or nitrocellulose shall be used in the manufacture of propellant procured under this specification unless otherwise specified. 4. QUALITY ASSURANCE PROVISIONS 4.1 Responsibility for inspectio

15、n. Unless otherwise specified in the contract or purchase order, the supplier is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract or order, the supplier may use his own or any other facilities suitable for the performan

16、ce of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and serv1ces conform to prescribed requirements.

17、 Reference shall be made to Standard MIL-STD-l09 in order to define terms used herein. 4.1.1 Submission of product. At the time the completed lot of product is submitted to the Government for acceptance, the contractor shall supply the following information accompanied by a certificate which attests

18、 that the information provided is correct and app11cable to the product being submitted: a. A statement that the lot complies with all of the qua1ity assurance provisions specified within this specification. b. Number of batches of product inspected, (shall be made available upon request by the cont

19、racting officer). c. Results obtained, by defect code, for all inspections performed, (shall be made available upon request by the contracting officer). d. Drawing, specification number and date, together with an identification and date of change. e. Certificate. of conformance an all material purch

20、ased by the contractor when such material is controlled by Government or commercial specification. referenced in any of the contractual documents. f. Number of pounds in the lot. g. Date submitted. h. Eight copies of propellant. description sheet, AMC Form 1047) (00 Form 1204) containing the applica

21、ble data (see 6.4). The certificate shall be signed by a responsible agent of the certifying organization. The initial certificate submitted shall be substantiated by evidence of the agents authority to bind his principal. Substantiation of the agents authority will not be required with subsequent c

22、ertificates unless, during the course of the contract, this authority is vested in another agent of the certifying organization. 4.2 Inspection provisions 4.2.1 Lot formation. The term “lot,“ as used throughout this specification, refers to an inspection lot, which is defined as an essentially homog

23、eneous quantity of propellant from which the representative sample is drawn and inspected to determine conformance of the lot with applicable requirements. The Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-P-50206 (AR) w/ AMENDMENT 5 4 sample s

24、elected sha11 represent only that quantity of propellant from which the sample was drawn and shall not be construed to represent any prior or subsequent quantities presented for inspection. A lot shall consist of one or more batches of M9 propellant which has been subjected to the same unit chemical

25、 or physical process intended to make the final product homogeneous. Unless otherwise approved by the contracting officer, the inspection lot size of propellant deliverable under the contract shall be not less than the smallest week1y estimate of quantities contractually scheduled for production dur

26、ing the contract period nor more than the largest quantity contractually scheduled for delivery during any month of the contract period. The classification of defects shall be in accordance with Standard MIL-STD-105. The criteria and procedures for the assignment of lot numbers shall be in accordanc

27、e with Standard MIL-STD-ll68. 4.2.2 Testing 4.2.2.1 Sampling. The sampling shall be in accordance with Standard MIL-STD-652, except that a five-pound sample shall be used for chemical and physical tests. If the sample fails to meet the requirements of paragraph 3, the lot shall be rejected. 4.3 Test

28、 methods and procedures 4.3.1 Bulk density, Major defect, Code No. 01001. The bulk density shall be determined in accordance with Method 502.2 or 502.1 of Standard MIL-STD-286. 4.3.2 Form and dimensions, Major defect, Code No. 02001. One hundred flakes shall be examined under a microscope for form a

29、nd dimension. 4.3.3 Closed bomb test, Major defect, Code No. 03001. The propellant shall be tested in accordance with Method 801.1 of Standard MIL-STD-286 (see 6.4 and 6.5). 4.3.4 Determination of graphite, Minor defect, Code No. 04001. The graphite content shall be determined as specified in MIL-ST

30、D-286, Method 309.1. 5. PREPARATION FOR DELIVERY 5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the contract or order (see 6.2). When packaging of materiel is to be performed by DOD or in-house personnel, these personnel need to contact the responsible p

31、ackaging activity to ascertain packaging requirements. Packaging requirements are maintained by the Inventory Control Points packaging activities within the Military Service or Defense Agency, or within the military services system commands. Packaging data retrieval is available from the managing Mi

32、litary Departments or Defense Agencys automated packaging files, CD-ROM products, or by contacting the responsible packaging activity. 6. NOTES 6.1 Ordering data. Procurement documents should specify the following: a. Title, number, and date of this specification. b. Process. - Details of the manufa

33、cturing process and the equipment used by the contractor will be submitted to the procuring activity, in writing, prior to commencement of manufacture. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-P-50206 (AR) w/ AMENDMENT 5 5 6.2 Inspection c

34、ode numbers. The five-digit code numbers, assigned to the inspections herein, are to facilitate future data collection and analysis by the Government. 6.3 Intended use. It is intended that the item of this specification will be used in the following case cartridges: M118, Ml95, M397, and the head as

35、sembly. 6.4 Submission of AMC Form l047. Information contained in the propellant description sheet, AMC Form 1047, need not be resubmitted in the form of a certificate, provided the provisions regarding certifying of responsible agents is adhered to (see 4.1.1). The Form 1047 shall be forwarded to:

36、Commanding Officer, Picatinny Arsenal, ATTN: SMUPA-ND2 and SMUPA-DE2, Dover, New Jersey, 07801. 6.5 Closed bomb test. Lot No. RAD06K-G66695 should be used as a standard in the closed bomb test. 6.6 Amendment notations. The margins of this specification are marked with vertical lines to indicate modi

37、fications generated by this amendment. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the m

38、arginal notations. Custodian: Preparing activity: Arrmy-AR Army-AR (Project Number 1376-2008-009) NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-