ARMY MIL-P-15064 G-1987 PADS SHOULDER AND SLEEVE-HEAD《护肩和袖头》.pdf

《ARMY MIL-P-15064 G-1987 PADS SHOULDER AND SLEEVE-HEAD《护肩和袖头》.pdf》由会员分享，可在线阅读，更多相关《ARMY MIL-P-15064 G-1987 PADS SHOULDER AND SLEEVE-HEAD《护肩和袖头》.pdf（36页珍藏版）》请在麦多课文档分享上搜索。

1、MIL-P-15064G 31 March 1987 SUPERSEDING MIL-P -15064F 13 December 1976 Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this. document should be addressed to U.S.: Army Natick Research, Development, and Engineering Center, Natick, MA

2、01760-5014, by using the self -addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. i i MILITARY SPECIFICATION PADS, SHOULDER AND SLEEVE-HEAD This specification is approved for use by all Departments and Agencies of the Department

3、 of Defense. 10 SCOPE 1.1 Scope. This document covers shoulder and sleeve-head pads used in clothing by the military services. . 1.2 Classification. The pads shall be of the following types and classes, as specified (see 6.2): Type 1 - Pads, Shoulder, Mans Class 1 - Amy, Navy, Coast Guard Class 2 -

4、Marine Corps (Jackets, Evening Dress; and Wool; and Class 3 - Marine Corps (Overcoat, Wool) Polyester/Wool Coats) Type II - Pads, Shoulder, Mans (Navy Evening Dress Uniform) DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. . THIS DOCUMENT CONTAINS 3b PAGES. 6 Provide

5、d by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-P-15064G Type III - Pads, Shoulder, Womans Class -1 - Army, Navy, Coast Guard Class 2 Class 3 - Marine Corps (Overcoat, Wool) Class 4 - Air Force (Coats, Womens) - Marine Corps (Coats, Wool; and Polyester/

6、Wool) Type IV - Sleeve-head, Mans and Womans 2. APPLICABLE DOCUMENTS i 2.1 Government documents. % 2.1 Documents. The following documents form a part of this document to the extent specified herein. documents shall be those listed in the issue of the Department of Defense Index of Specifications and

7、 Standards (DODISS) and supplement thereto, cited in the solicitation. Unless otherwise specified, the issues of these SPECIFICATIONS FEDERAL A-A-2 O 3 V-T-276 CCC-(2-438 ccc-c-440 PPP-B-636 MILITARY MIL-C-297 MIL-L-35078 STANDARDS FEDERAL . FED-STD-191 FED-STD-751 - Paper, Kraft, Untreated - Thread

8、, Cotton - Cloth, Buckram, Woven and Nonwoven - Cloth, Cheesecloth, Cotton, Bleached and - Boxes, Shipping, Fiberboard Unbleached - Cloth, Interlining, Cotton Warp, and Spun - Loads, Unit: Hair-Wool Filling Subsistence Items; Clothing, Personal Equipment and Equipage; General Specification For Prepa

9、ration of Semiperishable - Textile Test Methods - Stitches, Seams, and Stitchings 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-P-15064G MILITARY MIL-STD -1 05 MIL-STD -1 2 9 - Marking for Shipment and Storage MIL-STD-14 7 - Palletized Unit L

10、oads MIL-STD -7 3 1 - Quality of Wood Members for Containers and - Sampling Procedures and Tables for Inspection by Attributes Pallets (Copies of documents required by contFactors in connection with specific acquisition functions should be obtained from the contracting activity or as directed by the

11、 contracting activity.) 2.2 Other publications. The following documents form a part of this document to the extent specified herein. Unless otherwise specified, the issues of the documents which are DOD adopted shall be those listed in the issue of the NDISS specifieci in the solicitation. uniess oi

12、;herwise specified, the issues of documents not listed in the DODISS shall be the issues of the nongovernment documents which are current on the date of the solicitation* AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) D 3951 - Standard Practice for Commercial Packaging (Application for copies sho

13、uld be addressed to the American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103.) (Technical society and technical association documents are generally available for reference from libraries. technical groups and using Federal agencies. ) They are also distributed among 2

14、3 Order of precedence. In the event of a conflict between the text of this document and the references cited herein, the text of this document shall take precedence. Nothing in this document, however, shall supersede applicable laws and regulations unless a specific exemption has been obtained. o 3.

15、 REQUIREMENTS 3.1 Guide samples. Guide samples, when furnished, are solely for guidance and information (see 6.3). samples, in which case this document shall govern. Variations from this document may appear in the 3 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without licen

16、se from IHS-,-,-MIL-P-15064G 3.2 Materials. % 3.2.1 Print cloth. The print cloth shall be unbleached cotton or as an alternate for type I, class 1, types II and III, class 4 pads, a 50 percent cotton, 50 percent polyester blended cloth, f 5 percent cotton or polyester with 54 by 35 minimum yarns per

17、 inch may be used and shall meet the requirements in table I when tested as specified in 4.2.1.1. TABLE I. Material requirements Type and class Minimum yarns per inch Weight (oz per sq yd) Type I, class 1, type II and type III, class 4 54 by 42 1.8 (min) Type I, classes 2 O and 3 and type III, class

18、 3 60 by 48 2.0 to 3.5 3.2.2 Cheesecloth. 3.2.2.1 Type I, class 1; type III, class 1; and type IV sleeve-heads. The cheesecloth shall conform to type II, class 1 of CCC-C-440. type IV sleeve-heads and type I, class 1 pads may be made of fabric specified in 3.2.7, in which case the cheesecloth is not

19、 required. As an option, 3.2.2.2 Type III, class 2 pads. The cheesecloth shall be plain woven unbleached cotton cloth weighing 2.0 to 2.5 ounces per square yard. shall be as specified in 4.2.1.1. Testing 3.2.3 - Felt. The felt shall meet the following requirements when tested as specified in 4.2.1.1

20、. 3.2.3.1 Type II pads. The felt shall be a blend of cotton, wool, and rayon and shall weigh 4.2 to 4.3 ounces per square yard, any gray color and have a uniform thickness of 0.040 f 0.,005 inch. The wool content shall be a minimum of 30 percent dry weight. 4 Provided by IHSNot for ResaleNo reproduc

21、tion or networking permitted without license from IHS-,-,-MIL-P-15064G 3.2.3.2 Type III, class 1 pads. The felt shall be a blend of cotton and wool; cotton, rayon, and wool; or cotton and rayon. The felt shall weigh not less than 6.0 ounces per square yard and have a thickness of 0.058 to 0.070 inch

22、 under a 10-ounce load. The wool content shall be a minimum of 40 percent dry weight. 3.2.3.3 Type III, class 2 pads. The felt shall be white or gray, pressed felt consisting of wool and cotton or wool, cotton and synthetic fibers, thoroughly mixed and carded to produce a uniform and even blend that

23、 is well felted. The felt shall be smooth, free from tears, holes, lumps, or foreign matter and shall contain no loading materials, such as starch, glue, or other sizing substance. a minimum thickness of 0.030 inch. The felt shall contain not less than 50 percent wool. The felt shall weigh 3 to 4 ou

24、nces per square yard and have 3.2.3.4 Type III, class 4 pads. The felt shall be a blend of cotton, wool, and rayon weighing 2.1 to 2.4 ounces per square yard, shall be white, and shall have a uniform thickness of 0.02 f 0.003 inch. The wool content shall be a minimum of 30 percent dry weight. 3.2.4

25、Batting. The batting shall meet the following requirements when tested as specified in 4.2.1.1. 3.2.4.1 Type I, classes 2 and 3, and type III, class 3 pads. The batting shall be pure India cotton, thoroughly cleaned, free from pills and neps. 3.2.4.2 Type II pads. The batting shall be a commercial b

26、atting made of harsh fibered cotton with a minimum staple length of 1/2 inch, weighing approximately 14 ounces per square yard. 3.2.4.3 Type III, class 1 pads. The batting shall be made of garnetted fiber, containing not less than 90 percent wool dry weight. 3.2.5 Interlining. 3.2.5.1 Type I, class

27、1 pads. The interlining material shall be cotton warp and spun hair-wool filling conforming to type I of ML-C-297. 3.2.5.2 Type I, classes 2 and 3, type III, class 3 pads. The interlining shall be white buckram with yarns per inch of 28 Provided by IHSNot for ResaleNo reproduction or networking perm

28、itted without license from IHS-,-,-MIL-P-LSObVG 83 W 9999906 0379536 5 MIL-P-15064G (o a al 4 4 u U I a! P 3 40 E al 5 : al N 4 (o td a! k cd cn al 3 4 a cd 5: U (II a! v) 8 .;i N FI %I O H H al fi k al 2 ri. 3a 5% cdd u ou a! 5 al o al .rl a a d U u cd P 0 4 a rl d ri k a! nn rlcI) vu uw o MO R . C

29、u 11 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-a 8 .ri U u I rn U M ii sl 1 Fi z 3 O sl U cd Fi al P O 8 8 9 *-I Fi I U w 1 24 H H al 4 al Z z 50 ua -I4 h uu II) . MIL-P-3506LlG 83 9777906 0377537 7 d 31 U H H ;I a al sl U E O 0 I E O sl U M U

30、a 7 o U d do a (d a w O r al u U 3 o a Q U cd d a MIL-P-15 O 64G PI 5 v) (d al N sl rn al rn al 8 5 3 U I U 2 O d U U o n n n- m ssv 12 h) I O O b b CJ hl I O O I- b ? 4 I N -7 h) d hl I * I cd cn VJ II) II) 4. O m m Y? O0 ?“ O0 I-I- O0 dd II Da VJVJ II)m M O me O0 mm a (d a al 5 w O al M 3 2 QI rn

31、U I O al fi 3 u sl U rn PI M a al M O g . a Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NIL-P-15069G 83 977790b 0377518 al Fi E O 4 U (d k al O Y $ I d Fi 1 U w 3 s3 MIL-P-15064G N N I I O O h h Cu N I I O O b r- 44 U hl N I FI d I m 3, E? I rl N

32、 cn cn cn cn L. t!d ri O o 4 O o Fi Gw O00 . H H 3 3 E! U U x 5 O. S -4 u al bod 5 Mi4 SA U 4 (d ala 3 ian u alk wao nnn dNo www s d b N 13 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-. a (d pi k ri 3 O 4 G : m rl v1 d o H H H al h H m a al d U u

33、 I a (d pi k al 3 O i3 FI 2 . H H al H E MIL-P-LSOb4G 3 7797906 0377537 O MIL-P-15064G a aJ d U o I d O d .U k U i3 FI 1 3 u . N a 0 al u c! k VI 8 k VI % (d P E d 4 u ri al w *w alo 14 . d a *-( Co d sr IJY al 5 al LI d) 4 a u d d al i! Provided by IHSNot for ResaleNo reproduction or networking per

34、mitted without license from IHS-,-,-a i 4 H H NIL-P-15064G 83 9999906 0379520 7 cn rn Ya dh UU cn d O 4 U U 3 s.4 U : U O cv Ncv II O0 bh O0 rlrl II o Fi O 4-4 O0 m4- O U n P U U 7 cn al M 01 U rn ij rnm 111 U Ft El $4 sl 1 d 8 w - _ - _- -_ -_ MIL-P-L506LIG 83 a 7777906 0377523 2 a MIL-P-15064G 5 a

35、 d U U I a cd pi ei al a “ 1 O I 4. v) rl o H H H 2 , i W O P 18 m Li J? T O0 o hh h Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-a i d U G O o I . H H MIL-P-15ObLIG 83 = 9799906 037952Li MIL-P-15064G U cn rnm a (d lu a, a, rl v1 i k . E s 4 ci U

36、1 u 8 FI E $2 O au-r 10 nd wHh o H 9rl NW 9m o SUU . N 19 Hrl II O0 HhHh “ Il O0 bb rlrl II Ri Dki k O m a hlhl I1 O0 HhHh hlcv II O0 bHh rlrl II Cdd Dki $4 O rlrl O0 m* a o (d 4a Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- - - - - - _- MIL-P-LS

37、Ob4G 83 9737906 0377525 b I MIL -P-15 064G 4. QUALITY ASSURANCE PROVISIONS 4.1 Responsibility for inspection. Unless otherwise specified in the Except as otherwise contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. specif

38、ied in the contract or purchase order, the contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. : The Government reserves the right to perform any of the inspections set forth in this do

39、cument where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements. n 4.1.1 Responsibility for compliance. All items must meet all requirements of sections 3 and 5. part of the contractors overall inspection system or quality program. The absence of

40、 any inspection requirement in the document shall not relieve the contractor of the responsibility of assuring that all products or supplies submitted to the Government for acceptance comply with all requirements of the contract. known defective material, either indicated or actual, nor does it comm

41、it the Government to acceptance of defective material. The inspection set forth in this document shall become a Sampling in quality conformance does not authorize submission of * 4.1.2 Responsibility for dimensional requirements. Unless otherwise specified in the contract or purchase order, the cont

42、ractor is responsible for assuring that all specified dimensions have been met. be examined on the end item, inspection shall be made at any point or at all points in the manufacturing process necessary to assure compliance with all dimensional requirements. When dimensions cannot 4.1.3 Certificates

43、 of compliance. When certificates of compliance are submitted, the Goverment reserves the right to inspect such items to determine the validity of the certification. 4.2 Quality conformance inspection. Unless otherwise specified, sampling for inspection shall be performed in accordance with MIL-STD-

44、105. 4.2.1 Component and material inspection. In accordance with 4.1, components and materials shall be inspected in accordance with all the requirements of referenced documents unless otherwise excluded, amended, modlfied, or qualified in this document or applicable purchase document. 4.2.1.1 Compo

45、nent testing. Components shall be tested for the characteristics specified in FED-STD-191, wherever applicable, and as listed in table V. be as specified in table III, and sampling shall be as specified in table IV. Units for expressing lot sizes and sample units for testing shall 20 - . Provided by

46、 IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-P -1 50646 Where the determinations per sample unit and results reported as are not specified, they shall be as indicated in the applicable test method. requirements are applicable to the sample unit. All test

47、 reports shall contain the individual values used in expressing the final results. shall be unacceptable if one or more sample units fail to meet any test requirement specified. All The lot TABLE III. Lot sizes and sample units Component Lot size expressed as Sample unit for testing Cloth, cotton pr

48、int Cheesecloth, 2.0 to 2.5 oz Felt, cotton/wool Felt, cotton, wool, rayon Batting cotton Batting wool Matted noils Wadding, cotton, bleached Polyester-needlepunch yards yards yards yards ounces or yards ounces or yards ounces or yards yards yards 1/2 yd full width 1/2 yd full width 1/2 yd full width 1/2 yd full width 1/4 oz or 1/4 yd fui1 1/4 oz or 1/4 yd full 1/4 oz or 1/4 yd full 1/2 yd full width 1/2 yd full width width width width TABLE IV. Sampling 3 Lot size (lot unit) Sample size (sample unit) . 800 or less 2 801 to 22,000 inclusive 3 22,001 and over 5- 21 e L1 Provided by IH