ARMY MIL-M-45976 (1)-1982 MOUNT GUN M140 M140A1 M150 AND M150A1《M140 M140A1 M150 M150A1型装配枪》.pdf

《ARMY MIL-M-45976 (1)-1982 MOUNT GUN M140 M140A1 M150 AND M150A1《M140 M140A1 M150 M150A1型装配枪》.pdf》由会员分享，可在线阅读，更多相关《ARMY MIL-M-45976 (1)-1982 MOUNT GUN M140 M140A1 M150 AND M150A1《M140 M140A1 M150 M150A1型装配枪》.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、MIL-M-45976 (1) LO m 3999906 03?737 5 K-, - 7 - -_-A - MIL-M-45976 (AR) Amendment 1 8 February 1982 MILITARY SPECIFICATION MOUNT, GUN: M140, M140A1, M150 AND M150A1 This amendment forms a part of Military Specification MIL-M-45976 (WC) dated 19 January 1977, and is approved for use by the US Army Ar

2、mament Research and Development Command and is available for use by all Departments and Agencies of the Department of Defense. PAGE 4 Add new paragraph 3.3.3.2.1 as follows: 3.3.3.2.1 Sampling - Pian - For.- Contaminated - O ii - Check. The first five gun mounts produced from regular production shal

3、l be 100% tested for compliance with the requirements for the level of contamination, air bubbles, and physical count specified on the applicable drawing. If these mounts pass the test, sampling by lot size as specified herein shall be implemented. A lot shall consist of ten mounts or one days produ

4、ction, whichever is less, from which a sample of one shall be randomly selected for testing as prescribed in para. 3.3.3.2. Should any sample fail the test or if there is any change in production method, material or vendors, 100% inspection of five gun mounts shall be reinstituted. After Government

5、approved corrective action, if necessary, has been taken and the quality of product is assured, testing on a sampling basis may be reinstated.“ Custodian: Army-AR Preparing activity: Army-AR (Project 1015-A279) PHIS DOCUMENT CONTAINS I PACE;- 1 of 1 FSC 1015 * U.S. GOVeRNMENT PRINTING OFFICE: 1982-505-022/1567 2-1 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-