ARMY MIL-DTL-45360 H-1997 CARRIERS PERSONNEL FULL-TRACKED ARMORED M113A2 AND M113A3 MORTARS SELF-PROPELLED M106A2 (107MM) M125A2 (81MM) AND M1064 M1064A3 (120MM) SMOKE GENERATORS M.pdf

《ARMY MIL-DTL-45360 H-1997 CARRIERS PERSONNEL FULL-TRACKED ARMORED M113A2 AND M113A3 MORTARS SELF-PROPELLED M106A2 (107MM) M125A2 (81MM) AND M1064 M1064A3 (120MM) SMOKE GENERATORS M.pdf》由会员分享，可在线阅读，更多相关《ARMY MIL-DTL-45360 H-1997 CARRIERS PERSONNEL FULL-TRACKED ARMORED M113A2 AND M113A3 MORTARS SELF-PROPELLED M106A2 (107MM) M125A2 (81MM) AND M1064 M1064A3 (120MM) SMOKE GENERATORS M.pdf（34页珍藏版）》请在麦多课文档分享上搜索。

1、MIL-DTL-453bDH W 9999906 2030067 630 may be of use in improving this document should be addressed to: U. S. Army Tank-automotive and Armaments Command, ATTN: AMSTA-TR-EBLUE, Warren, MI 48397-5000, by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this

2、document, or by letter. IINCH-POUND 1 31 March 1997 SUPERSEDING 5 December 1991 MIL-DTL-4536OH(AT) MIL-C-45360qAT) DETAIL SPECIFICATION CARRIERS, PERSONNEL, FULL-TRACKED, ARMORED: M113A2 AND M113A3; M1064, M1064A3 (120MM); SMOKE GENERATORS: M1059, M1059A3 AND M58; PROCESSING FOR STORAGE AND SHIPMENT

3、 OF MORTARS, SELF-PROPELLED: M106A2 (lo“, M125A2 (81MM) AND This specification is approved for use by the U.S. Army Tank-automotive and Armaments Command, Department of the Army, and is available for use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 Scope. This specifica

4、tion covers the processing for storage and shipment of the M113A2 and M113A3 Armored, Full-Tracked, Personnel Carriers; the 107mm, M106A2, and 81mm, M125A2, and 12Omm, M1064, M106A3 Self-Propelled Mortars; and the M1059, M1059A3 and M58 Smoke Generators (see 1.2 and 6.1). 1.2 Classification. Process

5、ing should be of the following levels, as specified (see 6.2): Level A - Maximum militan, protection. - . Level A is the processing required for the protection of vehicle during shipment, handling, and storage exceeding 90 days from date of actual processing. This level does not provide for driveawa

6、y capability. It does provide for domestic or overseas shipment. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-453bOH m 0b 2030070 352 * * MIGDTL-453 6OH(AT) Level B - Minimum military protection. Level B is the limited processing required

7、for the protection of vehicle during shipment, handling, and storage not to exceed 90 days from date of actual processing. This level provides for driveaway capability, and domestic or overseas shipment (excluding open deck loading). 2. APPLICABLE DOCUMENTS 2.1 General. The documents listed in this

8、section are specified in sections 3 and 4 of this specification. This section does not include documents cited in other sections of this specification or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users ar

9、e cautioned that they must meet all specified requirement documents cited in sections 3 and 4 of this specification, whether or not they are listed. 2.2 Govement documents. 2.2.1 Specifications. standards, and handbooks. The following speciiications, standards, and handbooks form a part of this docu

10、ment to the extent specied herein. Unless otherwise specified, the issues of these documents are those listed in the issue of the Department of Defense Index of Specifications and Standards (DoDISS) and supplement thereto, cited in the solicitation (see 6.2). SPECIFICATIONS FEDERAL A-A-203 A-A-208 A

11、-A-374 A-A-883 A-A-1 05 1 A-A-525 18 A-A-52546 A-A-5 5 O 5 7 O-S-801 P-D-220 TT-E-529 - Paper, Kraft, Untreated. - Ink, Marking, Stencil, Opaque (Porous and Nonporous Surfaces). - Sodium Bicarbonate, Technical. - Tape, Pressure Sensitive Adhesive, Masking. - Paperboard, Wrapping and Cushioning. - Ti

12、re, Pneumatic: Retread and Repair Materials (Meric). - Hose, Preformed: Semi-Flexible, Reinforced. - Panels, Wood/Wood Based; Construction and Decorative. - Sulfuric Acid Electrolyte; for Storage Batteries. - Detergent, General Purpose. - Enamel, Alkyd, Semigloss, Low VOC Content. 2 Provided by IHSN

13、ot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NIL-DTL-453bOH 9999906 2030073 299 # MIL-DTL-453 6OH(AT) TT-V- 12 1 - UU-T-8 1 - MMM-A- 179 - PPP-B-60 1 - PPP-B-62 1 - PPP-c- 1 7 5 2 - Varnish, Spar, Water-resisting. Tags, Shipping and Stock. Adhesive, Paper Label,

14、Water-resistant. Boxes, Wood, Cleated Plywood. Box, Wood, Nailed, and Lock Corner. Cushioning Material, Packaging Polyethylene Foam. DEPARTMENT OF DEFENSE MILB-1 17 MIL-B- 12 1 MIL-C-450 MIL-C-5501/7 MIL-C- 10597 MIL-G- 10924 MIL-B-11188 MIL-A-1 1755 MIL-C- 16 173 MIL-D- 1679 1 MIL-L-21260 MIL-T-220

15、85 MIL-B-22 19 1 MIL-T-3 7402 MIL-P-46002 MIL-A46 153 MIL-H-46 170 MIL-T-50036 MIL-P-52905 MIL-D-81298 Bag, Sleeve and Tubing - Interior Packaging. Barrier Material, Greaseproofed, Water-proofed, Flexible. Coating Compound, Bituminous Solvent Type, Black (for Ammunition). Cap and Plug, Protective, D

16、ust and Moisture Seal. Cleaning Compound with Conditioner for Engine Cooling Systems. Grease, Automotive and Artiilery. Battery, Storage: Lead Acid. Antifreeze, Arctic-type. Corrosion Preventive Compound, Solvent Cutback, Cold-Application. Detergent, General Purpose (Liquid, Nonionic). Lubricating O

17、il, Internal Combustion Engine, Preservative and Break-in. Tape, Pressure- Sensitive, Adhesive, Preservation and Sealing. Barrier Materiais, Transparent, Flexible Heat- Sealable. Tester, Antifieeze Solutions. Preservation Oil, Contact and Volatile Corrosion- Inhibited. Antifieeze, Ethylene Glycol, M

18、iibited, Heavy Duty, Single Package. Hydraulic Fluid, Rust Inhibited, Fire Resistant Synthetic Hydrocarbon Base. Talc, Technical, T1 and T3. Paint, Camouflage, Removable. Dye, Liquid, for the Detection of Leaks in Aircraft Fuel Systems. 3 Provided by IHSNot for ResaleNo reproduction or networking pe

19、rmitted without license from IHS-,-,-MIL-DTL-453bOH 9999906 2030072 L25 9 MIL-DTL-453 6OH(AT) STANDARDS DEPARTMENT OF DEFENSE MIL-STD- 129 - Marking for Shipment and Storage. MIL-STD-2073-1 - Standard Practice for Military Packaging. (Unless otherwise indicated, copies of the above specifications, s

20、tandards, and handbooks are available from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19 1 1 1-5094.) 2.2.2 other Government documents, drawings, and publications. The following other Government documents, drawings, and publications form a part of this

21、 document to the extent specified herein. Unless otherwise specified, the issues are those cited in the solicitation. DEPARTMENT OF LABOR (DOL) Code of Federal Regulation (CFR), Title 29 DEPARTMENT OF TRANSPORTATION (DOT) Code of Federal Regulation (CFR), Title 49 ENVIRONMENTAL PROTECTION AGENCY PA)

22、 Code of Federal Regulation (CFR), Title 40 (Copies of the Code of Federal Regulations are available fiom the Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402.) DEPARTMENT OF TRANSPORTATION (DOT) Federal Motor Carrier Sdety Regulations (FMCSR). (Application for copi

23、es should be addressed to the Department of Transportation, Bureau of Motor Canier Sdety, Washington, DC 20590.) Hazardous Materials Regulations. (Application for copies should be addressed to the Department of Transportation, Hazardous Materials Regulations Board, Washington, DC 20590.) 4 Provided

24、by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-453bOH m 999990b 2030073 Ob1 m DRAWING ARMY 12269 128 - Closure Kit, Vehicle Protective. (Copies of these drawings are available fkom the U.S. Army Tank-automotive and Armaments Command, AT“: AMSTA-TR-EB

25、LUE, Warren, MI 48397-5000.) 2.3 Non-Government publications. The following documents form a part of this document to the extent specified herein. Unless otherwise specified, the issues of the documents which are DoD adopted are those listed in the issue of the DoDISS cited in the solicitation. Unle

26、ss otherwise specified, the issues of documents not listed in the DoDISS are the issues of the documents cited in the solicitation (see 6.2). AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI) ANSIAWCIOl - Wire Fabric (Industrial). (Application for copies may be obtained fiom the American National Standar

27、ds Institute, 11 West 42nd Street, New York, NY 10036.) AMERICAN SOCIETY FOR TESTING AND MATEXIALS (ASTM) ASTM A228/A228M - Standard Specification For Steel Wire, Music Spring Quality OD Adopted). ASTM E437 - Standard Specification For Industrial Wire Cloth And Screens (Square Opening Series) OD Ado

28、pted). - Standard Practice For Methods Of Closing, Sealing, And Reinforcing Fiberboard Shipping Containers OD Adopted). ASTM D3953 - Standard Specification For Strapping, Flat Steel And Seals OD Adopted). ASTM D5 1 18D5 1 18M - Standard Practice For Fabrication Of Fiberboard Shipping Boxes OD Adopte

29、d). ASTM D5330D53 30M - Standard specification For Pressure-Sensitive Tape for Packaging, Filament-Reinforced OD Adopted). ASTM D5486D5486M - Standard Specification For Pressure- Sensitive Tape For Packaging, Box Closure And Sealing OD Adopted). ASTM D 1974 5 Provided by IHSNot for ResaleNo reproduc

30、tion or networking permitted without license from IHS-,-,-flIL-DTL-453bOH m 99999Ob 2030074 TTB m MIL-DTL-45 3 6OH(AT) (Application for copies should be addressed to the American Society for Testing and Materiais, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.) ASSOCIATION OF AMERICAN RAIL

31、ROADS PUBLICATIONS (AAR) SectionNo. 1 - General Rules Governing Loading of Commodities on Open Top Cars. SectionNo. 6 - Rules Governing the Loading of Department of Defense Material on Open Top Cars. (Application for copies should be addressed to the Association of American Railroads, Publication De

32、partment, 50 F Street N.W., Washington, DC 20001-1564.) INTERNATIONAL AIR TRANSPORT ASSOCIATION (IATA) Dangerous Good Regulations (For Commercial Passenger and Cargo Air Shipment). (Application for copies should be addressed to International Air Transport Association, Sales Organization, 2000 Peel S

33、treet, Montreal, Quebec, H3A 2R4, Canada.) INTERNATIONAL CIVIL AVIATION ORGANIZATION (ICAO) Technical Instructions (Application for copies should be addressed to International Civil Aviation Organization, Docuemnt Sales Unit, 999 University Street, Montreal, Quebec H3C 5H7, Canada.) INTERNATIONAL MA

34、RITIME DANGEROUS GOODS CODE (IMDG) For Vessel Shipment (Application for copies should be addressed to American Label Mark Co., Label Master Division, 5724 North milaski Road, Chicago, IL 60646.) 2.4 Order of precedence. In the event of a conflict between the text of this document and the references

35、cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-453bOH W

36、9999906 2030075 934 = 3. REQUIREMENTS 3.1 Level A. 3.1.1 First article. When specified (see 6.2), a sample shall be subjected to first article inspection in accordance with 4.2. Approval of this vehicle shall not relieve the contractor of his obligation to process all vehicles in accordance with thi

37、s specification. Unless otherwise specified by the acquisition activity, any change to materials or design the bag shall be closed by heat sealing and securely attached in the drivers compartment of vehicle. The other copy of DA Form 2258 shall be waterproofed with adhesive conforming to MMM-A-179,

38、or sealed in a plastic bag, and securely attached in a conspicuous location on the exterior of the vehicle. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-flIL-DTL-q53bOH 9999906 2030076 870 D 3.1.7 Cleaning and drying (see 4.5.2.1). 3.1.7.1 Interio

39、r of vehicle. Interior surfaces of vehicle shd be cleaned with solution of detergent confirming to P-D-220, or Type 1 of MIL-D-16791, and water. Solution temperature shall not exceed 210 degrees Fahrenheit (OF), and pressure shall not exceed 5 pounds per square inch (psi) measured 4 inches fkom the

40、nozzle. Mer cleaning, cleaned surfaces shall be rinsed with clean water and dried. Care shall be taken during cleaning and rinsing operations to assure that no solution or water enters instruments, connections, or other components susceptible to water damage. Solution or water shall not accumulate a

41、nd remain in cavities that cannot be drained. Vehicles with decals, markers, straps, and floor plates installed shall only be hand cleaned with solution of P-D-220, or Type 1 of ME-D-16791, and water to prevent damage to these components. Cleaned surfaces shall be hand rinsed and dried. 3.1.7.1.1 Cl

42、eaning and drying of battery supports and retainers. Battery supports and retainers shall be cleaned with a solution of one-half pound of sodium bicarbonate conforming to A-A-374 per gallon of water. After cleaning, cleaned surfaces shall be flushed with clean water, then thoroughly dried. Dried sur

43、faces shall then be preserved in accordance with 3.1.8.2. 3.1.7.1.2 Cleaning and drying of backrests and seats. The backrest and seat cushions shall be cleaned with a solution of detergent conforming to P-D-220, or Type 1 of MIL-D-16791, in warm water. After cleaning, the cushions shall be wiped wit

44、h cloths saturated with clean water to remove cleaning solution. Care shall be taken not to saturate the cushions with cleaning solution or water. After rinsiig, the cushions shall be dried, then protected in accordance with 3.1.9.3. 3.1.7.2 Exterior of vehicle. The exterior of vehicle shall be clea

45、ned using solution of detergent conforming to P-D-220, or Type 1 of MIL-D-16791, in warm water or steam. Cleaning shall remove all foreign matter. Mer cleaning, cleaned surfaces shd be rinsed with clean water or steam and thoroughly dried. Care shall be taken to avoid entry of water or steam into th

46、e drivers or engine compartments. 3.1.8 Preservation. 3.1.8.1 Relubrication. If the vehicle has been operated more than 75 miles since lubrication, or after the vehicle has been cleaned in accordance with 3.1.7.2, the vehicle shall be relubricated using materials conforming to drawings, specificatio

47、ns or lubrication order applicable to the vehicle. All exposed oil can points such as, but not limited to, levers, locking levers, locking bars, locking pins, pintle pins, hinge pins, hinges strikers, wing nuts, door locks, hand- operated locking knobs, latches, linkage, and threaded ends of yokes a

48、nd related clevis pins shall be coated with lubricant conforming to MIL-L-21260, grade PE10-I. Excess lubricant shall be removed after coating. 8 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-453bOH m 9Ob 2030077 707 m 3.1.8.2 Preservation

49、of batterv supports and retainers. Top battery supports and retainers shall be preserved with compound conforming to ME-C-450. 3.1.8.3 Transmission, transfer assemblv. control differential. and final drives. The transmission shall contain lubricating oil conforming to grade 10 of MIL-L-21260 filled to operating level. The transfer assembly, control differential, and nal drives shall contain lubricating o