ARMY MIL-DTL-3943 94 H-2013 DECORATION MERITORIOUS CIVILIAN SERVICE AWARD U S NAVY.pdf

《ARMY MIL-DTL-3943 94 H-2013 DECORATION MERITORIOUS CIVILIAN SERVICE AWARD U S NAVY.pdf》由会员分享，可在线阅读，更多相关《ARMY MIL-DTL-3943 94 H-2013 DECORATION MERITORIOUS CIVILIAN SERVICE AWARD U S NAVY.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、AMSC N/A Page 1 of 2 FSC 8455 INCH-POUND MIL-DTL-3943/94H 22 July 2013 SUPERSEDING MIL-DTL-3943/94G 1 December 2007 DETAIL SPECIFICATION SHEET DECORATION, MERITORIOUS CIVILIAN SERVICE AWARD, U.S. NAVY This specification is approved for use by all Departments and Agencies of the Department of Defense

2、. The requirements for acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-DTL-3943. OBVERSE DASH NUMBERS: -1: Regular Size -2: Miniature Size MATERIAL (-1 and 2): Gilding Metal 95/5 (UNS Alloy No. C-210) DIMENSIONS: HEIGHT (including lug): -1

3、: 1-9/16 inches (REF) -2: 23/32 inch (REF) WIDTH: -1: 1-3/8 inches (REF) -2: 5/8 inch (REF) THICKNESS: -1 (at center): 0.095 inch 0.010 inch -2 (at edge): 0.078 inch 0.010 inch BLUE #18 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3943/94H

4、 Page 2 of 2 FINISH (-1 and -2): Copper Flashed, Oxidized, Buffed Relieved, Lettering and Rims Polished. The pendants reverse surface shall be made smooth for engraving. EPOXY (-1 and -2): Epoxy shall be applied to the obverse of the pendant as indicated above and as specified below, and shall match

5、 TIOH Hard Enamel Color Chip Number listed. Hard cloisonn enamel may be used in lieu of epoxy. TIOH HARD ENAMEL COLOR CHIP NUMBER LOCATIONS (OBVERSE ONLY) Blue #18 Designation Band DECORATION SET AND PRESENTATION CASE: The decoration set shall consist of a regular size medal, a miniature size medal,

6、 a service ribbon and a lapel button, all packaged in a presentation case conforming to the latest version of MIL-C-14633, Type VIII, Style 6 with a Class 3 or 4 pad. PACKAGING: The use of any type of plastic packaging material shall be prohibited. NOTES: 1. The term (REF) refers to the measurements

7、 taken from the Government furnished hub or die. 2. The specification slash sheet for the pendant drape and service ribbon is MIL-DTL-11589/235. 3. The specification slash sheet for the lapel button for the U.S. Navy is MIL-DTL-11484/33. 4. The specification slash sheet for the lapel button for the

8、U.S. Marine Corps is MIL-DTL-11484/40. CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodians: Preparing activity: Army - IH Army - IH Navy - NU Review activities: (Project No.

9、8455-2013-156) Navy - MC DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-