ARMY MIL-DTL-3628 234 A-2009 BADGE QUALIFICATION SAPPER TAB ARMY《陆军工兵资质徽章》.pdf

《ARMY MIL-DTL-3628 234 A-2009 BADGE QUALIFICATION SAPPER TAB ARMY《陆军工兵资质徽章》.pdf》由会员分享，可在线阅读，更多相关《ARMY MIL-DTL-3628 234 A-2009 BADGE QUALIFICATION SAPPER TAB ARMY《陆军工兵资质徽章》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、AMSC N/A Page 1 of 2 FSC 8455 INCH-POUND MIL-DTL-3628/234A 15 November 2009 SUPERSEDING MIL-DTL-3628/234 30 November 2004 DETAIL SPECIFICATION SHEET BADGE, QUALIFICATION, SAPPER TAB, ARMY This specification is approved for use by all Departments and Agencies of the Department of Defense. The require

2、ments for acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-DTL-3628. DASH NO. -1: Regular Size MATERIAL: Gilding Metal or Red Brass -2: Dress Miniature Size FINISH: Hard Enameled or Epoxied, Nickel Plated, Mirror-like Polished, and shall ma

3、tch The Institute of Heraldry (TIOH) Metal Finish Chip Number 16. DIMENSIONS: HEIGHT (overall): -1: 21/64 inch (REF) -2: 7/32 inch (REF) WIDTH (overall): -1: 1-5/32 inches (REF) -2: 13/16 inch (REF) THICKNESS (at edge): -1: 0.075 inch 0.010 inch -2: 0.062 inch 0.010 inch Provided by IHSNot for Resal

4、eNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3628/234A Page 2 of 2 NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. Enameled/epoxied areas shall be red as indicated. The color shall conform to TIOH Hard Enamel Col

5、or Chip Number 1. When hard enamel is used, the material requirement shall be gilding metal. When epoxy is used, the material requirement shall be gilding metal or red brass. 3. Attaching device shall be prong and clutch. Two prongs shall be located on the reverse on the horizontal center line and:

6、-1: Equidistant from each end and 3/4 inch 1/64 inch apart. -2: Equidistant from each end and 7/16 inch 1/64 inch apart. CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodian: P

7、reparing activity: Army - IH Army - IH (Project No. 8455-2010-016) Review activities: DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-