ARMY MIL-DTL-3628 21 H-2012 BADGE QUALIFICATION BASIC DRIVER AND MECHANIC U S ARMY.pdf

《ARMY MIL-DTL-3628 21 H-2012 BADGE QUALIFICATION BASIC DRIVER AND MECHANIC U S ARMY.pdf》由会员分享，可在线阅读，更多相关《ARMY MIL-DTL-3628 21 H-2012 BADGE QUALIFICATION BASIC DRIVER AND MECHANIC U S ARMY.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、AMSC N/A Page 1 of 2 FSC 8455 DETAIL SPECIFICATION SHEET This specification is approved for use by all Departments and Agencies of the Department of Defense. BADGE, QUALIFICATION, BASIC, DRIVER AND MECHANIC, U.S. ARMY The requirements for acquiring the product described herein shall consist of this

2、specification sheet and the latest issue of MIL-DTL-3628. Pebbled Background MATERIAL: Red Brass 85/15 (UNS Alloy No.C-230) or Nickel Silver 65/18 (UNS Alloy No.C-752). FINISH: Nickel Plated (C-230 only), Silver Plated, Oxidized, Buffed Relieved, Matte Finish and shall match The Institute of Heraldr

3、y (TIOH) Metal Finish Chip Number 14 with reverse and edges clean. DIMENSIONS: HEIGHT (Without lugs): 1 inch (REF) WIDTH (Overall): 1 inch (REF) THICKNESS: (At rim): 0.070 inch + 0.010 inch INCH-POUND MIL-DTL-3628/21H 05 November 2012 SUPERSEDING MIL-DTL-3628/21G 15 November 1996 Provided by IHSNot

4、for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-3628/21H Page 2 of 2 ATTACHING DEVICE AND LUGS: 1. Lugs shall be located equidistant from each end and 0.675 inch + 0.015 inch - 0 inch on centers. 2. The attaching device shall be prong and clutch type. 3. The pr

5、ongs shall be located on the horizontal center line equidistant from the sides and 3/4 inch + 1/32 inch apart. NOTES: 1. The term (REF) refers to the measurements taken from the Government furnished hub or die. 2. A forcer may be used to bring up the wheel. 3. The basic badge covered by this slash s

6、heet shall be used in conjunction with the badge clasps covered by specification slash sheet MIL-DTL-3628/22. 4. Badge may be nickel or rhodium plated with a Nickel Plated, Mirror-Like Polished and shall match TIOH Metal Finish Chip Number 16 for commercial sale only. For nickel or rhodium plated it

7、ems, the silver plating requirements shall not apply. CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodian: Preparing activity: Army - IH Army - IH Review activity: (Project No

8、. 8455-2012-158) DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-