ARMY MIL-DTL-15665 93-1996 DETAIL SPECIFICATION SHEET nINSIGNIA BRANCH OF SERVICE OFFICERS NATIONAL GUARD BUREAU《国民警卫队军官服务部徽章》.pdf

《ARMY MIL-DTL-15665 93-1996 DETAIL SPECIFICATION SHEET nINSIGNIA BRANCH OF SERVICE OFFICERS NATIONAL GUARD BUREAU《国民警卫队军官服务部徽章》.pdf》由会员分享，可在线阅读，更多相关《ARMY MIL-DTL-15665 93-1996 DETAIL SPECIFICATION SHEET nINSIGNIA BRANCH OF SERVICE OFFICERS NATIONAL GUARD BUREAU《国民警卫队军官服务部徽章》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、 RIL-DTL-L5665/93 = 9999906 2039773 857 = NOT MEASUREMENT SENSITIVE MIL-DTL-15665/93 27 June 1996 SUPERSEDING MIL-I-3575/37D 23 May 1995 DETAIL SPECIFICATION SHEET INSIGNIA, BRANCH OF SERVICE, OFFICERS, NATIONAL GUARD BUREAU This specification is approved for use by all Departments and Agencies of t

2、he Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and the issue of MIL-DTL-15665 listed in that issue of the Department of Defense Index of Specifications and Standards (DoDISS) specified in the solicitation. Pierced Pierc

3、e MATERIAL : -1: Red Brass -2: Red Brass or Zinc Aluminum DASH NO. -1: Regular -2: Subdued FINISH: -1: Gold Plated, Matte Finish, Polished Highlights and shall match -2: Dull Flat Black Enamel TIOH Metal Finish Chip Number 8. DIMENSIONS: HEIGHT (Overall) : 3/4 inch (1.91 cm) (REF) THICKNESS (At Thic

4、kest Point): 0.080 inch i 0.005 inch (0.203 cm k 0.012 cm) AMSC N/A FSC 8455 T)ISTRIBUTION STATRNT A. Approved for public release; distribution is unlimited. 1 of 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-15665/93 NOTES : furnished hu

5、b or die. 1. The term (REF) refers to measurements taken from the Government 2. Pierced areas shall be as indicated. 3. Attaching device shall be prong and clutch type. Prongs shall be located on the horizontal center line, equidistant from each end and 5/8 inch f 1/64 inch (1.59 cm f 0.04 cm) apart

6、. 4. The dull flat black enamel for Dash No. -2 shall match FED-STD-595 Chip No. 37038. 5. Insignia for Dash No. -1 may be manufactured for commercial sale only using 22 karat gold plate with nickel underplating, matte finish and polished highlights which shall match TIOH Metal Finish Chip Number 11

7、. CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodian: Army - IH Review activities: DLA - CT Preparing activity: Army - IH (Project No. 8455-0844) 2 of 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-