ARMY MIL-DTL-11589 141 F-2012 RIBBON SUPERIOR CADET AWARD ROTC (SENIOR DIVISION).pdf

《ARMY MIL-DTL-11589 141 F-2012 RIBBON SUPERIOR CADET AWARD ROTC (SENIOR DIVISION).pdf》由会员分享，可在线阅读，更多相关《ARMY MIL-DTL-11589 141 F-2012 RIBBON SUPERIOR CADET AWARD ROTC (SENIOR DIVISION).pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、AMSC N/A Page 1 of 2 FSC 8455 DETAIL SPECIFICATION SHEET RIBBON, SUPERIOR CADET AWARD, ROTC (SENIOR DIVISION) This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specifi

2、cation sheet and the latest issue of MIL-DTL-11589. RIBBON SIZE: Regular WIDTH: 1-3/8 inches + 1/16 inch - 0 (35.0 mm + 1.6 mm - 0) TOTAL WARP ENDS (Minimum): 448 PICKS PER INCH (Minimum): 40 (2 threads single shot) WEIGHT PER LINEAR YARD: 0.0175 pound LINEAR BREAKING STRENGTH FULL WIDTH (Minimum):

3、100 pounds COLOR PATTERN: REGULAR SIZE FINISH: MOIR TOTAL WIDTH OF STRIPES FUNCTION COLOR & CABLE NUMBER WIDTH INCHES & METRIC OF STRIPES STRIPES FILLING YARN 3/16 4.8mm * See Note Below White HA 67101 Ultramarine Blue HS 67118 1-3/8” White 1 25.4mm Solid Ground Old Glory Red HBF 67156 (35.0mm) HA 6

4、7101 3/16 4.8mm * See Note Below White HA 67101 Ultramarine Blue HS 67118 *NOTE: The warp and horizontal stripes shall be alternating, one (1) White HA 67101 end and one (1) Ultramarine Blue HS 67118 end throughout. The weave for the White HA 67101 and Ultramarine Blue HS 67118 will be 2/2 resulting

5、 in seven (7) alternate White HA 67101 and Ultramarine Blue HS 67118 stripes in each 3/8 inch (9.5mm) length of ribbon. The selvage shall have a catch cord for firmness, designed so as to eliminate any looping of the filling yarn. The color of the catch cord shall be White HA 67101. INCH-POUND MIL-D

6、TL-11589/141F 15 March 2012 SUPERSEDING MIL-DTL-11589/141E 9 June 2010 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-11589/141F Page 2 of 2 CHANGES FROM PREVIOUS ISSUE: The margins of this specification are marked with vertical lines to ind

7、icate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irres

8、pective of the marginal notations and relationship to the last previous issue. Custodian: Preparing activity: Army - IH Army - IH Review activity: (Project No. 8455-2012-006) DLA - CT NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-