ARMY MIL-C-64025-1986 CONTROL REMOTE M71 LAND MINE SYSTEM《M71型远程控制 构造地矿系统》.pdf

《ARMY MIL-C-64025-1986 CONTROL REMOTE M71 LAND MINE SYSTEM《M71型远程控制 构造地矿系统》.pdf》由会员分享，可在线阅读，更多相关《ARMY MIL-C-64025-1986 CONTROL REMOTE M71 LAND MINE SYSTEM《M71型远程控制 构造地矿系统》.pdf（159页珍藏版）》请在麦多课文档分享上搜索。

1、MIL-C-bq025 12 7779906 0353332 5 W s - 37- e.3 MIL-C-64025(AR) 24 OCTOBER 1986 MILITARY SPECIFICATION CONTROL, REMOTE, M71 LAND MINE SYSTEM This specification is approved for use within U.S. Army Armament, Munitions and Chemical Command, and is.itvailable Cor use by all Departments and Agencies of t

2、he Department of Defense. 1. SCOPE 1.1 Scope. This specification establishes the Qua1it.y Assurance - * provisions for the manufacture, inspection, test and packaging of the rn 2. APPLICABLE DOCUMENTS Remote Control Unit (RCU). L- -. * 2.1 Government documents. 2.1.1 Specifications and standards. Un

3、less otherwise specified, the -following specifications and standards-of issue listed in that issue of the Department of Defense Index of Specifications and Standards (DoDISS) specified in the solicctation form part of this specification to the extenttspecified herein. SPECIFICATIONS MILITARY MIL-C-

4、81/6 - Capacitors, Variable, Ceramic, Dielecrtic Styles CV35 and CV36. MIL-C-30 98 - Crystal Units, Quartz, General Specification for Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improv- ing this document should be addressed to: Commander,

5、 U.S. Army Armament, Munitions and Chemical Command, Attn: AMSMC-QA, Dover, New Jersey 07801-5001 by using the self-addressed Standardization Document Improve- ment Proposal (DD Form 1426) appearing at the end of this document or by letter. AMSC N/A FSC 1290 DISTRIBWION STATEMENT A Approved for publ

6、ic release; distribution is unlimited. THIS DOCUMENT CONTAINS i-!? PAGES. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-I MIL-C-64025 12 W 777770b 0353113 7 W MIL-R-5757 - MIL-S-19500 - MIL-S-19500,/116 - MIL-S-19500/255 - MIL-S-19500/283 - MIL-S-1

7、9500/291 - MIL-S-19500/317 - MIL-S-19500/3 56, - MIL-S-19500/427 - MIL-S-19500/290 - Relays, Electromagnetic, General Specification for Semiconductor Device, General Specification For . Semiconductor Device, Diode, Sil.icon, Switching Types 1N914, 114148, 134531 TXlN914, TXlN4148, and TXlN4531. Semi

8、conductor Device, Transistor NPN, Silicon, Switching Types 232221, 2N2221A1 212222, and 2N2222A1 Jan, Jantx, Jantxv and Jans. Semiconductor Device, Transistor, PNP Silicon, Switching Types 2N69Aa and 24453, Jan, Jantx, and Jantxv. Semiconductor device, Transistor, PNP Silicon Switching Types 282904,

9、 2N2904A1 232905, and 2N2905A1 Jan, Jantx, Jantxv, and Jans. Semiconductor Device, Transistor, PSNP, Silicon Switching Types 2N2906, 2N2906A, 232907, and 2N2907A1 Jan, Jantx, Jantxv, and Jans. Semiconductor Device, Transistor, NPN, Silicon Switching Types 2N2369A, 2N3227, 2N4449, Jan, Jantx and Jans

10、. Semiconductor Device, Diode, Silicon, Voltage Regulator Types 1N4954 through 134996, 115968 and 1N5969 Jan, Jantx Jantxv, and Jans. Semiconductor Device, Diode, Silicon, Power Rectifier, Types 135614, 1N5618, 1N5620, 135622, Jan, Jantx, Jantxv and Jans. 2 . - Provided by IHSNot for ResaleNo reprod

11、uction or networking permitted without license from IHS-,-,-P MIL-C-64025 12 W 7777706 0353334 7 MIL-C-64025 (AR) MIL-S-19500/437 - Semiconductor Device,. Diode, Silicon, Low Noise Voltage Regulator 1N5518B thru 1N5546B and TXlN5518B thru TXlN5546B. MIL-S-19500/441 - Semiconductor Device, Transistor

12、, PNP Silicon, Power Types 2N3740, 283741, Nontx, Tx and Txv. MIL-S-19500/444 - Semiconductor Device, Diode, Silicon, Switching Types 1N5711, TXlN5711. MIL-S-19500/445 - Semiconductor Device, Diode, Silicon, Switching Types 1N5712, TXlN5712. MIL-M-38510 - Microcircuits, General Specification For. MI

13、L-M-38510/12 - Microcircuits, Digital, TTL, Monostable, Multvibrators, Monolithic Silicon. MIL-M-38510/173 - Microcircuits, Digital, CMOS Decoders, Encoder, and Decoders/Demultiplexers, Monolithic Silicon, Positive Logic. MIL-M-38510/300 - Microcircuits, Digital, Low Power Schottky TTL, Nand Gates,

14、Monolithic Silicon. MIL-C-39001/5 - Capacitor,. Fixed, .Mica Dielectric, Established Reliability Styles CMR04 to 08. MIL-C-39003/1 - Capacitor, Fixed,. Electrolytic (Solid Electrolyte), Tantalum, (Polarized, Sintered Slug), Established Reliability, Style CSR 13. MIL-C-39006/9 - Capacitor, Fixed, Ele

15、ctrolytic (Nonsolid Electrolyte), Tantalum, (Polarized, Sintered Slug), 85 Degrees C (Voltage Derated to 125 Degrees CI, Established Reliability, Style CIR65. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-C-64025 32 m 9979906 0353335 O m MIL-

16、C-64025 (AR) MIL-R-39OQ7/8 - MIL-R-39008/1 - MIL-R-39008/2 - MIL-R-39008/3 - MIL-R-39008/5 - MIL-C-39014/1 - MIL-C-39014/2 - MIL-C-39014/22 - MIL-C-39016/9 - MIL-R-39017/1 - MIL-S-46844 - MIL- S-45 7 43 - MIL-A-48078 - MIL-C-48655 - Resistor, Fixed, Wire-Wound (Power Type), Established Reliability S

17、tyle RWR80. Resistor, Fixed, Composition (Insulated), Established Reliability, Style RCRO7, Resistor, Fixed, Composition (Insulated), Established Reliability, Style RCRZO. Resistor, Fixed,. Composition (Insulated), Established Reliability, Style RCR32. Resistor, Fixed, Composition (Insulated), Estab

18、lished Reliability, Style RCR42. Capacitor, Fixed, Ceramic Dielectric, (General Purpose), Established Reliability, Style CKR05. Capacitor, Fixed, Ceramic Dielectric, (General Purpose), Established Reliability Style CKR06. Capacitor, Fixed, Ceramic Dielectric, (General Purpose), Established Reliabili

19、ty Style CKR22, CKR23, and CKR24. Relay, Electromagnetic, Established Reliability, DPDT, Low Level to 1.0 Ampere. Resistor, Fixed, Film (Insulated) Established Reliability, Style RLR07. Solder Bath Soldering of Printed Wiring Assemblies Soldering, Manual Type, High Reliability, Electrical and Electr

20、onic Equipment Ammunition, Standard Quality Assurance Provisions, General Specification for Core, Toroid 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-I. MIL-P-55149 - Post, Binding, Electrical- (Insulated and Uninsulated), General Specification

21、for MIL-0-55310 - Oscillators, Crystal General Specification for MIL-C-55681 - Capacitors, Chip, Multiple Layer, Fixed, Unencapsulated, Ceramic Dielectric, Established Reliability, General Specification for MIL-C-55681/5 - Capacitor, Chip, Multiple Layer, Fixed Unencapsulated, Ceramic, Dielectric, E

22、stablished Reliability, Styles CDR21 to CDR25 (High Frequency). MIL-R-83401/2 - Resistor Networks, Fixed, Film, Style RZ020, 16 Pin Dip. STANDARDS MILITARY MIL-STD-105 MIL-STD-202 MIL-STD-331 MIL-STD-454 MIL-STD-750 MIL-STD-883 MIL-STD-1169 DOD-STD-1686 Sampling Procedures and Tables for Inspection

23、by Attributes Test Methods for Electronic and Electrical Component Parts Fuze and Fuze Components, Environmental and Performance Test For Standard General Requirement for Elect ron ic Equipment Test Methods for Semiconductor Devices Test Methods and Procedures for Micro- electronics Packaging, Packi

24、ng and Marking for Shipment of Inert Ammunition Components Electrostatic Discharge Control Program for Protection of Electrical and Electronic Parts, Assemblies and 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- NIL-C-bq025 12 = 777770b 0353LL7 4

25、 MIL-(2-64025 (AR) Equipment Handbooks DOD-HDBK-263 - EDC Handbook for Protection of Electrical arid Electronics Parts, Assemblies and Equipment. f P 2.1.-2 Other government documents drawings and publications. The ol.lowing government documents, drawings, and publications form a art of this specifi

26、cation to the extent specified herein. DRAWINGS U.S. ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER (ARDE) PRODUCT AND PACKAGING DRAWINGS 9332870 - Control, Remote, Land Mine M71 CODE OF FEDERAL REGULATION Title 49 - Transportation, Parts 100-199 (Copies .of specifications, standards, drawing

27、s and publications required -by manufacturers in connection with specific acquisition functions should be obtained for the contracting activity or as directed by the Contracting Officer). 2.2 ,Order.of precedence. In the event of a conflict between the text of. t-his specification and the references

28、 cited herein, the text of this specification shall take precedence. 3. REQUIREMENTS 3.1 Materials. Materials shall be in accordance with the applicable drawings, specification and,standards. 3.2 Components and assemblies. The components and assemblies shall comply with all requirements specified on

29、 Drawing 9332870 and associated drawings and with all requirements specified in applicable specifications and standards. 3.3 Physical characteristics. 3.3.1 Envelope and dimensions. The envelope and dimensions of the Remote Control Unit shall conform to the requirements of Drawing 9332870. 6 Provide

30、d by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-C-64025 (AR) 3.4 Environmental conditions. 3 e.4.4 Pransportak%on .vibration. -The -electronics assembly -shall . . . _ show -no evidence -o-f i.nterna-l. or-emteaaZ -damage -that- .will. -aff-ect the int-

31、ended. .func.tions following Transportation. Vibration Test No. 119, Procedure 2 of MIL-STD-331. . .3 .-42 Temperature range. -The Remote -Control Unit- .shall perf-orm as required herein and in Drawing.933026 -over -the temperature range, after one (1) hour conditioning at temperature. _. a. Cold -

32、35 (+0/-5) degrees F b. Hot +145 (+5) degrees F C. Ambient 70 (+10/-10) degrees F ._ . _-_- 3.4.3 Shock. The electronic assembly ahall, perform as required after impact environments that provide mechanical shock of TBD Gs peak wit a duration of TBD ms minimum, TBD ms maximum. 3.5 Soldering. All sold

33、ered electrical connections shall comply with MIL-S-46844, and MIL-S-45743. 3.5.1 Solderability. Electronic assembly parto that are to be eoldered shall comply with the solderability requirements of MIL-S-45743 or as otherwise specified. 3.6 Remote Control Unit performance characteristics. This sect

34、ion describes the performance characteristics of the Remote Control Unit (RCU), assembly number 9332873. 3.6.1 RCU power off current. With the voltage at P1-RED (+14.4 VDC) with respect to Pl-BLK (COMMON) set to 13 + 0.5 volts (Nominal Battery Voltage), the unit power switch off, the current flowing

35、 into P1-RED shall be 2.0 milliamperes maximum when tested per 4.5.2.1 . 3.6.2 RCU standbv current. With the voltage (Pl-RED with respect to P-1-BLK) set to -13 + 0.5 volts, the unit power switch on and displays blank, the current flowing into P1-RED shall be 100 milliamperes maximum when tested per

36、 4.5.2.2 3.6.3 Keyboard lights. . All the keyboard keys shall be backlit when the unit power switch is on when tested per 4.5.2.3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-_I flIL-C-bq025 12 979990b 0353119 6- MIL-C-64025 (AR) 3.6.4 Low batterv

37、 volt-age. The RCU shal flash the -“BAT LOW“ LED when the battery voltage is at or below the low voltage threshold. The low voltage threshold shall be 11.0 volts max. and 10.3 volts minimum when tested per 4.5.2.24 3.6.5 RCU transmitting current. With the battery voltage (Pi- RED with respect to P1-

38、BLK) set-to 13 + 0.5 volts and the RCU transmitting into a 50 +.5% ohm resistive load, the current flowing into Pl-RED shall be 2,6 amperes maximum when tested per 4,502 e25 3.6.6 Transmitting Power. Wit-h a battery voltage of 13 + 0.1 Its, the RF-Power-into a 50 + 5% ohm resistive load at the ANTEN

39、NA, while transmitting, shall be 10 watts minimum when tested per 4.5.2.26 3.6.7 Tuning (load matching) capability. The RCU shall produce 10 watts minimum into the 50 ohm real component of each of the complex loads 1isted.in the table below with a battery voltage of 13 + 0.1 volts when tested per 4.

40、5.2.27 LOAD A. B C D E LOAB-IMPEDANCE 50 - j169 50 + j152 83 + j88 316- j169 79 + j183 - 3.6.8 Transmitter cutoff voltage, The RCU shall not transmit an RI? signal when the battery voltage is at or below the cutoff threshold of 10 + 0.5 volts when tested per 4.5.2.28 3.6.9 Data retention time. Data

41、stored in the RGU memory shall be-retained for at least 5 minutes.with the battery disconnected from the unit when tested per 4.5.2.29 3.6.10 Initial power application. When battery power is first applied or until a valid STORE code has been established, the RCU shall display INVALID with the STORE

42、code select switch is off when tested per 4.5.2.4 3.6.11 STBE-cs or RESET SD key respectively is pressed,.where n is the current GROUP ID number . and the RCU is in the SEND mode when tested per 4.5.2.19. 3.6.20.2 Tuning sequence. The RCU shall momentarily display “TUNING when the XMIT switch is pre

43、ssed-sequentially after the DEPLOY,.DESTRUCT, or RESET SD key and the RCU is in the SEND mode when tested per 4.5.2.19.1. 3.6.20.3 Transmit display. The RCU shall display “$MIT TUNE = m“ where m is an integer from O to 9 after the RCU has Completed the tuning sequence when tested per 4.5.2.19.2. 3.6

44、.20.4 RF output sequence. An RF message, as specified by Drawing 9333026 for the FSD data of the current group, shall be generated after the RCU has completed the tuning sequence when tested per 4.5.2.19.3. 3.6.20.5 Group status update. When the RI? transmission has completed, the group status shall

45、 be updated as specified by 3.6.18.2. 11 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- MIL-C-64025 32 W 777770b 0353323 T .- 3,7 Tunin the auto tune selectable inductors shunted (shorted) and capacitors disabled (disconnected), an RF signal of 11.

46、0 VRMS at frequency Fo (as specified in the 9333026 drawing) having a source impedance of 50 ohms applied to RFIN (Al-El4) and the XFER RELAY input (Al-El6) connected to GROUND (Ai-El8). 3.7.1.1 Reflectometer output - 50 ohm load. With a 50 ohm resistive load between RFOUT (A2-El3) and GROUND, the V

47、REFL output (Al-El7) shall be 0.15 Vdc maximum when tested per 4.5.5.1.1. 3.7.1.2 Reflectometer output - 75 ohm load. With a 75 ohm resistive load between RFOUT and GROUND, the VREFL output shall be between 0.75 Vdc to 1.25 Vdc when tested per 4.5.5.1.2. 3.7.1.3 Reflectometer output - no load. With

48、RFOUT unterm- inated the VREFL output shall be 4.5 Vdc minimum when tested per 4.5.5.1.3 . 3.7.2 Inductor elements. The Tuner assembly shall have the capability of switching four inductors between RFIN and RFOUT. Each inductor shall. be individually controlled by a single data bit in the TUNE DATA p

49、attern as shown in Figure 5, The four inductance values and associated data patterns shall be as specified in Table 1 when tested per 4.5.2. TABLE 1 Data Pattern Inductance Pattern (bits 12345678) at 2.5Mz + 5% A B C D 00001000 0.758 + 10 A: 00000100 1.5 UH + 10 % 00000010 3.0 UH + 5 % 00000001 . 6.0 uH + 5 % 3.7.3 Capacitor elements. The Tuner assembly shall have the capability of switching