ARMY MIL-C-63115-1977 CARTRIDGE 40MM RED SMOKE CANOPY M682 METAL PARTS FOR AND LOADING ASSEMBLING AND PACKING《M682型40MM红烟遮棚炮弹金属零件组装及包装》.pdf

《ARMY MIL-C-63115-1977 CARTRIDGE 40MM RED SMOKE CANOPY M682 METAL PARTS FOR AND LOADING ASSEMBLING AND PACKING《M682型40MM红烟遮棚炮弹金属零件组装及包装》.pdf》由会员分享，可在线阅读，更多相关《ARMY MIL-C-63115-1977 CARTRIDGE 40MM RED SMOKE CANOPY M682 METAL PARTS FOR AND LOADING ASSEMBLING AND PACKING《M682型40MM红烟遮棚炮弹金属零件组装及包装》.pdf（41页珍藏版）》请在麦多课文档分享上搜索。

1、- - MIL-C-b311S 13 = 77777Ob 0343750 b , MIL-C-63115(AR) 28 JULY 1977 MILITARY SPECIFICATION CARTRIDGE, 4OMM, RED SMOKE, CANOPY, M682 METAL PARTS FOR AND LOADING, ASSEMBLING AND PACKING This specification is approved for use by the U.S. Army Armament Research and Development Command and is available

2、 for use by all Departments and Agencies of the Department of Defense, 1, SCOPE 1,l This specification contains requirements not normally covered by the drawings and ppovides quality assurance provisions for the fabrication of parts and load- ing, assembling and packing for Cartridge, 40MM, Red Smok

3、e, Canopy, M682, a 2, mNTS 2.1 Issues of documents, - The following documents of the issue in effect on date of invitation for bids or request for proposal, form a part of this specification to the extent specified herein, SPECIFICATIONS MILITARY MIL-P-223 - Black Powder MIL-C-5541 - Chemical Films

4、and Chemical Film MIL-A-48078 - Ammunition, Standard Quality Materials for Aluminum and Aluminum Alloys Assurance Provisions, General Specification For FSC: i310 Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should b

5、e addressed to : Commander, US Army Armament Research and Development Command, Attn. DRDAR-QA, Dover, New Jersey 07801 by using the self-addressed Standardization Document Improvement 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Provided by IHSN

6、ot for ResaleNo reproduction or networking permitted without license from IHS-,-,- MIL-C-b31e sus- pended fromthe parachute at ambient Eemperature. 30403 Parachute, - The parachute shall not separate from the smoke assembly at ejection or delay opening from time of ejection for more than 5 seconds,

7、3,4,4 Firing, - No projectile shall stick in the gun bore and the projectile shall not burst or eject the smoke assembly 50 feet from the launcher, 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Provided by IHSNot for ResaleNo reproduction or netw

8、orking permitted without license from IHS-,-,-Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-time ambi fail shall be. recorded for informational purposes (average) nt ph se fail any of the following; do A total of twenty-two (22) or more in the (1)

9、Parachute failure (3.Q03). (2) Item fails to function (Table (III). (3) Altitude less than 200 ft (Table III), (4) Burning time incorrect (average) (3,4,2), e, A total of eight (8) or more in the cold phase any of the following: (1) Parachute failure (3.Q03), (2) Item fails to function (Table III).

10、(3) Altitude less than 200 ft (Table III), Burning time shall be recorded for informational purposes (average) (3,4,2), 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-u3 c l- w m IL 8 a i t K O 13 W + . K O w 2 u MIL-C-63LL5 13 7777706 03Li376L O

11、W u a L L O U S L- O O u .I- r - 12 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-i ! I VI VI I- E c u W I v) m N -= ti . . LLW 0-l“ 01 “5 I. . . . . .- i: . : 1- : E: u u .I- W L Id c C, 3 m r *I- L ar c Q) 5 zi h 3 .;I Provided by IHSNot for Resa

12、leNo reproduction or networking permitted without license from IHS-,-,-_I K O 4 ri LL O r( Li w X v) - MIL-C-IIIJ 13 M 9797906 03L13975 O M mm Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-z Q H G Lu e v) U z O U K w X X ? 5; w 2 - IL O 2- I- P v a

13、 x O rn P a c F U a, r lu W bl E 3 h! PI N . . s * dOI r c VI 2 P O 2 O F a r 5 X w * O I- U E ic aJ -0 a, E O a c 27 0 . c L n . 3 1 E 2 C i Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-n. e 4 Y MIL-C-63LL5 L3 m 7797706 0343777 Li m c mm . 33 u3

14、VIE b N ? m mm c bpbp u3Ln O0 99 28 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-d o 6 e X o m o, E .- ir u lu a. e al U O z -z MIL-C-L3L.L5 13 7777OL 0343778 b U QI c cc QJ U .r QI E O Q- *P- i , Provided by IHSNot for ResaleNo reproduction or ne

15、tworking permitted without license from IHS-,-,-MIL-C-63115 13 979770b 0343979 M 4,4,3 Testing. - 4.4,3,i Moisture Content (See Table l), Major - TABLE 1 Material Drawing Delay Composition Ignition Composition Composition Ejection Disc Smoke Composition 9252369 9255797 9252399 9274456 The contractor

16、 shall provide adequate controls to insure com- pliance with the requirements and shall test for verification at least one (1) sample of each material from each eight hours production of cartridges, Composite samples shall not be used, If the moisture content of a sample exceeds the requirement and

17、loading has not begun, that quantity.of material repre- sented by the sample shall be rejected. If assemblies have been loaded with material containing excessive moisture, the remaining material that is represented by the sample together with all ccartridges loaded with the non-forming material shal

18、l be rejected, 4,4,3,2 Air pressure, - This test shall be conducted . 100 percent, Any cartridge which fails to comply with the requirement specified on the applicable drawing shall be classified defective and removed from the lot, 4,4,3,3 Transportation-vibration, - After completion of the 100 perc

19、ent air pressure test and beginning with the first lot produced and continuing until three (3) -acceptable lots (lots not accepted by disposition) have complied with the acceptance criteria specified in Table II, two-hundred and sixty-four (264) cartridges shall be selected from each lot, packed in

20、their regular shipping containers and sub- jected to this test, The cartridges shall be observed and examined visually without disassembly for any evidence of failure to comply with the requirements of Table II, TABLE II Defect Drawing Cartridge not safe to transport following test Critical Cartridge damaged after test Major Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-