ARMY MIL-C-40153 L-1991 CLOTHING REPAIR SHOP TRAILER MOUNTED《装在拖车上的服装修理厂》.pdf

《ARMY MIL-C-40153 L-1991 CLOTHING REPAIR SHOP TRAILER MOUNTED《装在拖车上的服装修理厂》.pdf》由会员分享，可在线阅读，更多相关《ARMY MIL-C-40153 L-1991 CLOTHING REPAIR SHOP TRAILER MOUNTED《装在拖车上的服装修理厂》.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、MIL-C-40L53L 35 9799906 0493962 b a a MIM-40153L 30 Septenber 1991 EmFmSEDING MIM-O040153K(GL) 7 Janq 1991 MIM-40153J 12 bWtdl 1984 MILITARY smFIcATIoN Ms specification is appraved for use by all Deparnents and Agencies of the Deparnent of Defense. 1. SCOPE 1.1 Scow. This specification covers a self

2、-contained clothing repair shop, designed to be transported by and removable from a standara Govenmient furnished trailer. 2.1 Government documentC. 2.1.1 swc ifications, standardc, and handbooks. !he folluwing specifica- Unless otherwise specified, the issues of these docxmients tions, standards, a

3、nd handbookc form a part of this document to the extent specified herein. are those listed in the issue of the Department of Defense Index of Specifications and Standardc (DODISS) and supplement thereto, cited in the solicitation (see 6.2). Beneficial camrrientc (recamniendations, additions, deletio

4、ns) and any pertinent data which may be used in impraVing this document should be adrd to: Center, Natick, MA 01760-5017 by using the Standardi zation Document Irrrpravement Fmpcsal (DD Form 1426) appear- at the end of this document or by letter. U.S. Army Natick Resear distribution unlimited. ti Pr

5、ovided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SPECIFICATIONS A-A-63 2 - A-A-2344 - A-A-50470 - P-D-680 - 00-S-256/GEN - 00-S-2 56/ 1 00-S-2 56/3 00-S-256/8 RR-1-660 IT-P-664 GGG-P-471 GGG-s-121 GGG-S-278 PPP-B-636 PPP-C-843 PPP-P-40 MIrnARY MIGP-116

6、MIGB-117 MIGB-121 MIL-P-514 MIGP-2001 MIM-7298 MIGS-85634 MILITARY MIGs“E105 MIGsI?)-129 Flatirons, Electric wrenchec, Adjustable Oilers, Hand, Filler sewulg Machine, Inductrial; -1 specification SewhgMachines, Industrial; Flatbed, Single- sewing Machines, Industrial; cylinder Bed, single- Sewing Ma

7、chines, Inductrial; witton-sewing mchine Ironing Board, Pads and Covers; (Household) Primer Coating, Alkyd, Comion-Inhibiting, Lead and chrmate Free, v“-mnpliant Pliers; Pliers, Slip Joint Screwdriver and Screw starter, Hand Shears and Scissors Boxes, Shipping, Fibe s and Dry Cleaning and Eegreasing

8、 Solvent For Needle, Machines Needle, Machines Tool Accessories for mer Driven, Metal. and Wood- working Ezachinery a 1 MIL-C-OL53L 35 M 97799Ob 0493b3 B MIGc-40153L Preservation, Methcds of Barrier Material, Greasepmfed, Waterpmfed, Plates, Identification, Instruction and Marking, Funch, Cutting, R

9、evolving Head Manuals, Cammercial Off-the-shelf Sealer, Heat, Seam Tape and Patch, Anti-Ekpcsum Bags, Sleeves and wing Flexible Blank Cov 1. All wiring devices shall be UL listed. All motors 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- MIL-C-40

10、L53L 35 m 9999906 0493967 5 m MIM-40153L 3.4.2 Fabricath clmeral. The cabinet frame and racks are welded con- struction. nie shea-, tawing skids, -, and lifting eye wies are noted on the outermost sections only. The outennost pie may be set in place and used as templates to locate the urderlying hol

11、es. Contractors who prelocate all holes are responsible for their correct alignment. 3.4.3 sewins machine ascemblies. Tkie sewing machine accemblies shall conform to 00-S-256 and the applicable slash sheets, and the requhments of detailed paragraphs 3.4.3.1 through 3.4.3.3 of this specification. Whe

12、n in conflict with 00-S-256, this specification shall take precedence. requirements for the stans and table tops shall be as noted in paragraphs 3.4.3.4 and 3.4.3.5 and as specified on the drawings. Ilie averail dimensions of the sewing machines and related ccanponentc shall be such as to fit within

13、 the spaces pmvided in the cabinet as sham on the drawings. in addition to the supplies called for in the detailed paragraphs, each sewing machine shall be supplied with one each of the folluwing conforming to 00-S-256: The Ewbin winder operators manual 2 spool thread unwinders Oil drip pan Parts ma

14、nual Size 3L belts (length determined Main- manual Wrication chart by manufacturers mounting) The muals shall be prepared in accordance with MIM-7298. The bobbin winder an thread unwMers stan shall be mounte to the table top with 35914). with the hole sizes of the thread stand and bobbin winder. unw

15、hfier base and bobbin wMer mounting hole patterns shall be used as a pattern for mounting the inserts into the table top. lamps shall be as cpecified on the applicable drawings. corrosion resistant steel (m) screws and CRES inserts (* perm The screw and insert sizes shall be ccarp.tible with each ot

16、her and The thread The machine motors and 3.4.3.1 Machine, cloth*. The clothing machine shall be a light-mehn duty machine conforming to 00-S-256/1, class 3, stitch type 301. size shall be 18-3/4 by 7 inches. Each machine Ml be pmvided with two hinge plates appropriate for mounting the machine head

17、to the table top. Each machine shall be furnished with a round bar treadle, treadle retainer clips, treadle extension, and ball joint linkage rod. stands, table tops, motors, and accecsories shall be assenbled per Drawing 6-1-6384. manufacturers instructions. folluwing spare parts: The bed All machi

18、ne heas, The hinge plates shall be mounted per the machine head Each machine shall be supplied with the Item identification cxiantitv Presserbar Needle bar thread guide Needle bar thread guide screw 6 1 1 1 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS

19、-,-,-NIL-C-4OL53L 35 7977906 0473968 7 MIM-40153L Needle clamp, camplete Ihroat plate Ihroat plate screw Feed dog screw Tension accembly, cosrp?lete Face plate screw Face plate thmb screw Presser bar lifting lever Bed slide plate spring screw Ihread guide set (4 pc) J3inged presser foot Bobbin case

20、Bobbin, metal Shuttle and race assembly Thread take-up spring Shuttle race screw Needle, round point, chrame finish: Metric sizes 110 120 13 O 14 O 2 1 2 2 1 1 1 1 1 1 1 1 10 1 1 2 100 100 100 100 3.4.3.2 Machine, darninq. The darning machine shall confonn to OO-S-256/3, class 3. chrame finish needl

21、es, sizes 16 and 18, 15 metal bobbins, 5 bobbin cases, and a vertical access rotary hook. round bar foot pedals with retainer clips and springs to normally return to the yp position, and per and foot lifter chah. stands, table tops, mtors, and acceccories shall be mounted per Drawirig Each machine s

22、hall be cupplied with 100 ruund point Each machine shall be furnished with two All machine heads, 6-1-6385. 3.4.3.3 Machine, button. The button machine shall confonn to OO-S-256/8, class 1. The machine shall be pmvided with per and foot lifter chains. furnished with two round bar foot pedals with re

23、tainer clips and springs to normally return to the up position. All machine heads, standc, table tops, motors, and accessories shall be mauited per Drawing 6-1-6388. The button machine shall be suitable for sewing two and four hole flat buttons frcan 20 to 45 lines clase to or away from light to hea

24、vyweight materials. It shall be a single needle, 101 stitch machine with a vibrating needle bar and a cylinder bed, including cress over and knotting stitches. 1000 stitches per minute. for stay buttons, and accessories for shank buttons. One hundred ea: are noted on the drawings. The configuration

25、for the openings shall confonn to the machine head manufacturerls requhenents. appmpriate for their intended use. me upper an lawer outer perimeter edges shall have a guarter round or fm the Eledro-Seal Corporation, 55 Wanaque Ave., Pmpton Lakes, NJ 07442, product ST-180. b. The three layer (PTFE) t

26、ape is available from Eledro-Seal Copration, product -184; or frm W. L. Gore & Associates, prcduct HIK 016 GT. 6.7 Subject tem (key worcil list-. -ins Field Sewing 6.8 Chmes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue d

27、ue to the extensivenecc of the changes. custodians: Preparing activity: Army - GL Air Force - 99 Review activities: Army-m Air Force - 84 DLA - GS user Activity: Navy - MC 20 Army - GL (Project 3530-0089) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-