ARMY MIL-C-368 J-1989 CLOTH SATIN RAYON AND CLOTH TWILL RAYON《人丝斜纹绸和人丝缎》.pdf
《ARMY MIL-C-368 J-1989 CLOTH SATIN RAYON AND CLOTH TWILL RAYON《人丝斜纹绸和人丝缎》.pdf》由会员分享,可在线阅读,更多相关《ARMY MIL-C-368 J-1989 CLOTH SATIN RAYON AND CLOTH TWILL RAYON《人丝斜纹绸和人丝缎》.pdf(12页珍藏版)》请在麦多课文档分享上搜索。
1、. I INCH-POUND 1 MIL-C-368J 4 May 1989 SUPERSEDING MIL-C-3 68H 15 October 1973 MILITARY SPECIFICATION CLOTH, SATIN, RAYON AND CLOTH, TWSLL, RAYON This specification is approved for use by all Departments and Agencies of the Department of Defense. 1. SCOPE 1.1 Scope. This specification covers rayon l
2、ining cloths for use in various clothing items. 1.2 Classification. The cloth shall be of the following classes as specified (see 6.2). Class 1 - Twill, 3.7 ounce Class 2 - Twill, 4.2 ounce Class 3 - Satin, 4.5 ounce 2. APPLICABLE DOCUMENTS 2.1 Government documents. Beneficial comments (recommendati
3、ons, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: U.S. Army Natick Research, Development, and Engineering Center, Natick, MA 01760-5014 by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appe
4、aring at the end of this document or by letter. AMSC NIA FSC 8305 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. . THIS DOCUMENT CONTAINS /& PAGES. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-C-3bJ 83 777790
5、6 0370773 5 w , MIL-C-368J * 2.1.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this specification to the extent specified herein. Unless otherwise specified, the issues o these documents are those listed in the issue of the Departme
6、nt of Defense Index of Specifications and Standards (DODISS) and supplement thereto, cited in the solicitation (see 6.2). SPECIFICATION FEDERAL PPP-P-1133 - Packaging of Synthetic Fiber Fabrics STANDARDS FED ERAL FED-STD-4 - Glossary of Fabric Imperfections FED-STD-191 - Textile Test Methods * (Unle
7、ss otherwise indicated, copies of federal and military speciEications, standards, and handbooks are available from the Naval Publications and Forms Center, (ATTN: NPODS), 5801 Tabor Avenue, Philadelphia, PA 19120-5099.) * 2.1.2 Other Government documents, drawings, and publications. The following ot
8、her Government documents, drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified, the issues are those cited in the solicitation. FEDERAL TRADE COMMZSC ION Rules and Regulations Under the Textile Fiber Products Identification Act (Copies ar
9、e available from the Federal Trade Commission, Washington, DC 20580-0001 ) 9: 2.2 Non-Government publications. The following documents form a part of this document to the extent specified herein. Unless otherwise specified, the issues of the documents which are DOD adopted are those listed in the is
10、sue of the DODISS cited in the solicitation. Unless otherwise specified, the issues of documents not listed in the DODISS are the issues of the documents cited in the solicitation (see 6.2). 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-. MIL-C-3
11、bJ 3 77977Ob 0370774 7 MIL-C-368J * AMERICAN ASSOCIATION OF TEXTILE CHEMISTS AND COLORISTS (AATCC) Chromatic Transference Scale (Application for copies should be addressed to the American Association of Textile Chemists and Colorists, P.O. Box 12215, Research Triangle Park, NC 27709-2215.) * (Non-Go
12、vernment standards and other publications are normally available from the organizations that prepare or distribute the documents. These documents also may be available in or thr.ough libraries or other informational services.) * 2.3 Order of precedence. In the event of a conflict between the text of
13、 this document and the references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 3. REQUIREMENTS * 3.1 First article. When specified (see 6.2), a sample shall be su
14、bjected to first article inspection (see 6.3) in accordance with 4.3. 3.2 Standard sample. The dyed and finished cloth shall match the standard sample for shade and shall be equal to or better than the standard sample with respect to all characteristics for which the standard sample is referenced (s
15、ee 6.4). * 3.3 Material. The yarns shall be multifilament rayon. It is encouraged that recycled material be used when practical as long as it meets the requirements of this specification. 3.4 Color. The color of the cloth shall be as specified (see 6.2) and shall match the standard sample. The use o
16、f dyes and compounds containing elementary sulfur capable of oxidation to sulfuric acid is prohibited. The dyestuffs shall be chosen and applied so that the dyed and finished cloth shall show no more labile sulfur than shown by the standard sample when tested as specified in 4.4.3. When a standard s
17、ample is not available, the dyed and finished cloth shall show no more than a slight trace of labile sulfur as defined in the test method specified in 4.4.3. treatment to fix the dyestuffs to the fibers, the contractor shall certify in writing to the contracting officer that in the additive material
18、 formaldehyde is not the principle fixing agent and that the additive material used will not create an odor or cause degradation of the cloth during storage. When dyestuffs are used which require an additional * 3.4.1 Matching. The color of the dyed cloth shall match the standard sample when viewed
19、under filtered tungsten lamps that approximate artificial daylight and that have a correlated color temperature of 7500 + 200 K, with illumination of 100 + 20 foot candles, and shall be a good match to the standard sample under incandescent lamplight at 2300 5 200 K. 3 t Provided by IHSNot for Resal
20、eNo reproduction or networking permitted without license from IHS-,-,-MIL-C-3bJ 3 7777706 0370775 7 MIL-C-368 J 3,4,2 Colorfastness. The finished cloth shall show fastness to perspiration and wet drycleaning equal to or better than the standard sample or equal to or better than a rating of “good“. T
21、he finished cloth shall show fastness to crocking equal to or better than the standard sample or shall have an AATCC Chromatic Transferance Scale rating of not lower than 3.5 except for black, which shall have an AATCC Chromatic Transference Scale rating of not lower than 2.5. Testing shall be as sp
22、ecified in 4.4.3. 3.5 Physical requirements. The physical requirements of the finished cloth shall be as specified in table I when tested as specified in 4.4.3, TABLE I. Physical requirements Breaking Breaking Weight Yarns streng th strength oz/sq yd per inch (dry), pounds (wet), pounds (minimum) (m
23、inimum) (min imum) (min imum) Class Warp Filling Warp Filling Warp Filling Weave 1 3.7 121 07 1 O0 50 40 20 2/1 right twill 2 4.2 142 71 115 55 46 22 2/1 right twill 3 4.5 180 67 150 55 60. 22 5-harness satin (see fig. i) 3.5.1 Width. Unless otherwise specified (see 6.2), the width shall be not less
24、 than 41 inches inclusive of selvages. 3.6 Finish. The cloth shall be natural finish. The use of resins, oils, starches, or gums in the finishing of the cloth is prohibited, 3.7 pH. The pH value of the water extract of the finished cloth shall be not less than 5.0 nor greater than 8.5 when tested as
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ARMYMILC368J1989CLOTHSATINRAYONANDCLOTHTWILLRAYON 斜纹 人丝缎 PDF
链接地址:http://www.mydoc123.com/p-441321.html