ARMY MIL-C-36465 A-1989 COT FOLDING HOSPITAL ALUMINUM《医院可折叠铝轻便小床》.pdf
《ARMY MIL-C-36465 A-1989 COT FOLDING HOSPITAL ALUMINUM《医院可折叠铝轻便小床》.pdf》由会员分享,可在线阅读,更多相关《ARMY MIL-C-36465 A-1989 COT FOLDING HOSPITAL ALUMINUM《医院可折叠铝轻便小床》.pdf(13页珍藏版)》请在麦多课文档分享上搜索。
1、1. SCOPE . MIL-C-3bLI65A 65 9 777770b 0260853 7 9 1 INCH-POUND I MIL-C-36465A 25 June 1989 SUPERSEDING MIL-C-36465 15 January 1966 MILITARY SPECIFICATION COT, FOLDING, HOSPITAL Aluminum This specification is approved for use by all Departments and Agencies of the Department of Defense. 1.1 Scope. Th
2、is specification covers one type of lightweight, adjustable, compactly folding, aluminum cot with a canvas cover. 2. APPLICABLE DOCUMENTS 2.1 Government documents. 2.1.1. Specifications, standards, and handbooks. The following specifications, standards, and handbooks form a part of this document to
3、the extent specified herein. Unless otherwise specified, the issues of these documents shall be those listed in the issue of the Department of Defense Index of Specifications and Standards (DODISS) and supplement thereto, cited in the solicitation (see 6.2). IBeneficial Comments (recommendations, ad
4、ditions, deletions) and any I !pertinent data which may be of use in improving this document should1 Ibe addressed to: Defense Personnel Support Center, Directorate of I IMedical Materiel, DPSC-RST, 2800 South 20th Street, Philadelphia, PAI 119101, by using the self-addressed Standardization Documen
5、t Improve- Iment Proposal (DD Form 1426) appearing at the end of this document I lor by letter. I AMSC/NA FSC 6530 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. O THIS DOCUMENT CONTAINS /a PAGES. Provided by IHSNot for ResaleNo reproduction or networking permitted
6、 without license from IHS-,-,-SPECIFICATIONS Federal V-T-285 QQ-A-200/8 QQ-A-591 QQ-A-601 TT-E-527 TT-P-1757 ccc-D-950 CCC-T-191 PPP-B-601 PPP-B-621 PPP-B-636 Military MIL-C-496 MIL-W-530 MIL-C-36465A 65 77Ob 0260854 O W MIL-B-543 MIL-C-5541 MIL-C-7219 MIL-L-10547 MIL-T-43566 STANDARDS Federal FED-S
7、TD-151 FED-STD-595 F ED-STD- 7 5 1 Mi 1 it ary MIL-STD-105 MIL-STD-129 MIL-STD-794 MIL-C-36465A Thread, Polyester Aluminum Alloy 6061, Bar, Rod, Shapes, Tube Aluminum Alloy Die Castings Aluminum Alloy Sand Castings Enamel, Alkyd, Lusterless Primer Coating, Zinc Chromate, Low-Moisture- Dyeing and Aft
8、ertreating Processes for Cotton Textile Test Methods Boxes, Wood, Cleated-Plywood Boxes, Wood, Nailed and Lock-Corner Boxes, Shipping, Fiberboard and, Wire, Extruded Sensitivity Cloths Clips, End, Strap Webbing, Textile, Cotton, General Purpose, Buckles, Tongueless and Web Strap Chemical Conversion
9、Coatings on Aluminum and Aluminum Alloys Cloth, Duck, Nylon Liners, Case, and Sheet, Overwrap; Water-Vapor- proof or Waterproof, Flexible Tape, Textile, Cotton or Polyester, General Purpose, Natural, or in Colors Natural or in Colors Metals; Test Methods Colors Stitches, Seams and Stitchings Samplin
10、g Procedures and Tables for Inspection by Marking for Shipment and Storage Parts and Equipment, Procedures for Packaging of Attributes 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-C-364b5A 65 7777906 0260855 2 9 I 2.3 Order of precedence. In
11、 the event of a conflict between the text of this document and the references cited herein (except for related associated detail specifications, specification sheets, or MS standards), the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regul
12、ations unless a specific exemption has been obtained. MIL-C-36465A 8 (Unless otherwise indicated copies of federal and military specifications, standards, and handbooks are available from the Naval Publications and Forms Center, (ATTN: NPODS), 5801 Tabor Avenue, Philadelphia, PA 19120-5099.) 2.1.2 O
13、ther Government documents, drawings, and publications. The following other Government documents, drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified, the issues are those cited in the solicitation. DRAWING Defense Personnel Support Cente
14、r (DPSC) I 2109 Cot, Folding, Aluminum (Copies of the drawing may be obtained from: The Defense Personnel Support Center, 2800 So. 20th Street, Philadelphia, PA, 19101, Attn: DPSC-RST). 2.2 .Non-Government publications. The following documents form a part of this document to the extent specified her
15、ein. Unless otherwise specified, the issues of the documents which are DOD adopted are those listed in the issue of the DODISS cited in the solicitation. Unless otherwise specified, the issues of documents not listed in the DODISS are the issues of the documents cited in the solicitation (see 6.2).
16、COLOR ASSOCIATION OF THE UNITED STATES, INC. United States Army Standard Color Card for the Offical Standardized Shades of Sewing Threads Association of the United States, Inc., 200 Madison Avenue, New York 16, N.Y.). (Application for copies should be addressed to the: Color (Non-Government standard
17、s and other publications are normally available from the organizations that prepare or distribute the documents. These documents also may be available in or through libraries or other informational services.) 3. REQUIREMENTS 3 Provided by IHSNot for ResaleNo reproduction or networking permitted with
18、out license from IHS-,-,-MIL-C-3b4bSA b5 9777906 02b085b 4 c MIL-C-36465A 3.1 Materials. Except as otherwise indicated, materials shall conform to the applicable portions of the documents referenced herein. When materials to be used are not specifically designated, they shall be suitable for the pur
19、pose intended. 3.1.1 Nylon duck. Nylon duck shall conform to MIL-C-7219, 7.25 OZ., class 1, Type III, O.G. 106. 3.1.2 Webbinq. Webbing for the tie straps shall conform to type IIb, class 4 of MIL-W-530. Reinforcing webbing shall conform to type II (hard texture), class 4 of MIL-W-530. Webbing shall
20、be vat dyed olive drab No. 7. The webbing shall be made mildew resistant by evenly depositing, within the webbing, a maximum of 1.28 percent copper-8- quinolinolate in lieu of the maximum specified in MIL-W-530. 3.1.3 Polyester thread. Thread for all stitching shall conform to V- T-285, for type II,
21、 class 1, letter size FF. The thread shall be vat dyed olive drab shade S-1, conforming to the United States Army Standard Color Card. The finished thread shall show good colorfastness to laundering, chlorine bleaching, and weathering. 3.1.4 Metal components. 3.1.4.1 Endpieces, and leqs, and sidepie
22、ces. Aluminum tubing, both round and square, shall be aluminum alloy 6062-T6. As an alternate, endpieces and legs shall be aluminum ally tubing temper T6, conforming with QQ-A-200/8, 1-1/8 inches outside diameter and 0.065 inch wall. Side pieces shall be round cornered, square aluminum alloy tubing
23、temper T6, conforming with QQ-A-200/8, 1-1/8 inches square and 0.065 inch wall. 3.1.4.2 Hinqe assembly. Hinge Assembly shall be a heat treated aluminum alloy sand casting, alloy 356 T6 conforming to QQ-A-601, class 3, or as an alternate an aluminum alloy die casting conforming to QQ-A-591, class A 3
24、80. Assembly shall be with 3/16 inch by 1-5/16 inch roundhead, monel metal or corrosion-resisting steel, annealed, bright-finished rivets. 3.1.4.3 Leq ansle braces. Leg angle braces shall be spring steel wire, 1/4 inch diameter. 3.1.4.4 Rivets. Rivets shall be aluminum alloy 2017114. 3.1.4.5 Buckles
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ARMYMILC36465A1989COTFOLDINGHOSPITALALUMINUM 医院 可折叠 轻便 PDF
链接地址:http://www.mydoc123.com/p-441320.html