ARMY MIL-B-50984-1971 BAG PROPELLING CHARGE M67 EMPTY《M67型装药扩爆袋 空》.pdf

《ARMY MIL-B-50984-1971 BAG PROPELLING CHARGE M67 EMPTY《M67型装药扩爆袋 空》.pdf》由会员分享，可在线阅读，更多相关《ARMY MIL-B-50984-1971 BAG PROPELLING CHARGE M67 EMPTY《M67型装药扩爆袋 空》.pdf（9页珍藏版）》请在麦多课文档分享上搜索。

1、I MIL-B-50984 (MU) 30 December, 1971 MILITARY SPECIFICATION BAG, PROPELLING, CHARGE, r;16 7, EMPTY 1. SCOPE 1.1 This specification covers the empty bags for the Charge, Propelling, M67. 2. APPLICABLE DOCUMENTS 2.1 The following documents of the issue in effect on date of invitation for bids form a p

2、art of this specification to the extent specified herein: SPECIFICATIONS FEDERAL UU-T-106 - Tape, Pressure-Sensitive Adhesive, pP-B-26 - Bag, Plastic, Polyethylene PPP-B-6 36 - Box Fiberboard PPP-T-45 - Tape, Gummed, Paper Reinforced and Plain, Masking, Paper For Sealing and Securing MILITARY MIL-A-

3、2550 - Ammunition and Special Weapons, General Specification for STANDARDS MIL I TA RY MIL-STD-105 - Sampling Procedures and Tables for MIL-STD-109 - Quality Assurance Terms and Definitions MIL-ST3-1168- Lot Numbering of Ammunition MIL-STD-1169- Packaging, Packing and Marking for Shipment of Inert A

4、mmunition Components MIL-STD-1235- Single and Multilevel Continuous Sampling Procedures and Tables for Inspection by Attribut es Inspection by Attributes (ABC-STD-105) a FSC: 1315 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-B-50984 13 m 99999

5、06 0333148 3 -_ - MIL-B-50984 (MU) DRAW I NG S ARMY 9271883 - Bag, Propelling, M67 PUBLICATIONS . ARMY ET- 9 2 71 8 8 3 Equipment Tabulation (Copies of specifications, standards, drawings and publications required by contractors in connection with specific procurement functions should be obtained fr

6、om the procuring activity or as directed by the contracting officer). 3. .REQUIREMENTS 3.1 Material.-Materials shall be in accordance with applicable drawings and specifications. ;i . -.+:n . 3.2 Bags.-The bags shall comply with all requirements specified on Drawing (dwg.) 9271883, as applicable, an

7、d with . s. : all requirements specified in the applicable specification. IamdaIWh and marked in weight zones of .O05 ounces. in a thorough, workmanlike manner. dirt, grease and other foreign material. p ;!.=!*i: I: I: .e* .-:L. * ris - . _. :*. - 3.3 Weight Classification.-All bags shall be classif

8、ied 3.4 Workmanship.-All bags shall be fabricated and finished All bags shall be free of c y J 3.5 First article inspection.-This specification makes provisions for first article inspection. Requirements for the submission of first article samples by the contractor shall be as specified in the contr

9、act (See 6.1). 4. QUALITY ASSURANCE PROVISIONS 4.1 Responsibility for inspection.-Unless otherwise specified in the contract or order, the supplier is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract or order, :!i !$,-:

10、+ :I.:;:*:+-: - - ,. i,- . . . . - ,:- . - : .: -:; I-. ,I . .: .=, s:,:*.-:h i . :i:.: Critical : None defined. e-* k ,!:i . .I - - - Major: None defined. Minor : AQL 1.5 percent i I 201. Any opening in liner.Visual 203. Size of bags incorrect. Visual I 202. Liner not closed.Visual 4.3.3 Testing 4.

11、3.3.1 Weight cla sification, Minor Defect, (See 3.3) .-All 4.3.4 -_ bags shall be weighed an% classified in groups of .O05 ounces. ET-9271883 identifies the inspection equipment required to perform the examinations andCests prescribed in this section. The contractor shall design inspection equipment

12、 in accordance with the instructions i-n 6.2. Inspection equipment .-Equipment Tabulation number - 4.3.4.1 Government rights to documentation.-Inspection equipment drawings and lists provided and revised in accordance with the requirements of the ET may be used by DOD activities for design, procurem

13、ent, manufacture, testing, evaluation, production and receiving inspection, overhaul, shipping, storage, identification of stock, ordering and storage of replacement parts a inspection of items at overhaul, general maintenance of equipment, construction, survey and whenever inspection equipment draw

14、ings are needed. 4.3.4.2 Government use of contractors inspection and test equipment.-The contractor shall make available to the Government all inspection and test equipment Recessary for determining conformance with contract requirements. Personnel for operating the equipment, and verification of i

15、ts accuracy, shall be supplied by the contractor for the performance of examination or test by the Government. 5. PREPARATION FOR DELIVERY 5.1 Packaging 5.1.1 Level C.-Like-size bags shall be stacked flat in bundles of 1000 bags. A plain paperboard pad corisisting of commercial chipboard, minimum ,0

16、40 inch thickness, shall be placed on the bottom and top of each bag stack. The length and width of the t pad shall be equal to the outside length and width of the bags. 6 !w- p:-.-. -:.*:.:, L.l I -.:t. ._ i- i:;.;a:$i:3:.: *. i Officer, Picatinny Arsenal, ATTN: SMUPA-:.%:,* . .C. . - +:&;, ”;I”o”I ! 3 f ARMY-MU ARMY-MU a 9 * U. S GOVERNMENT PRINTING QFFICL 1972.714-164/6052 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-