ARMY MIL-A-63529-1982 ACTIVATOR ANTITANK MINE PRACTICE M1 PARTS FOR AND LOADING ASSEMBLING AND PACKING《实践指出反坦克M1激活器的零件的装载 组装及包装》.pdf
《ARMY MIL-A-63529-1982 ACTIVATOR ANTITANK MINE PRACTICE M1 PARTS FOR AND LOADING ASSEMBLING AND PACKING《实践指出反坦克M1激活器的零件的装载 组装及包装》.pdf》由会员分享,可在线阅读,更多相关《ARMY MIL-A-63529-1982 ACTIVATOR ANTITANK MINE PRACTICE M1 PARTS FOR AND LOADING ASSEMBLING AND PACKING《实践指出反坦克M1激活器的零件的装载 组装及包装》.pdf(17页珍藏版)》请在麦多课文档分享上搜索。
1、MIL-A-63529 AR) 2 FEBRUARY 19 rs 2 MILITARY SPECIFICATION ACTIVATOR, ANTITABK MINE: PRACTICE MI.; PARTS FOR AND LOADING, ASSEMBLING AND PACKING This specification is approved for use by the U. S. Army Armament Research and Development Command, and is available for use by all Departments and Agencies
2、 of the Department of Defense. 1. SCOPE 1.1 Scope. This specification covers quality assurance provisions and preparation for delivery for the Practice Activator: M1. 2. APPLICABLE DOCUMENTS 2.1 Government documents. 2.1.1 Specifications - and standards. .- Unless otherwise specified (see 6.2), the
3、following specifications and standards of the issue listed in that issue of the Department of Defense Index of Specifications and Standards (DoDISS) specified in the solicitation, form a part of this specification to the extent specified herein. SPECIFICATIONS MI LI TARY MIL-A-48078 STANDARDS MIL I
4、TARY MIL-STD-105 Ammunition, Standard Quality Assurance Provisions, General Specification For. Sampling Procedures and Tables for Inspection by Attributes. 2.1.2 Other Government documents, drawings, and publications. The following other Government documentsform a part of this specification to the e
5、xtent specified herein. DRAWINGS (See 6.4) u. S. ARMY ARMAMENT RESEARCH AND DEVELOPMENT COMMAND , THIS DOCUMENT CONTAINS 17 PAGES. FSC 1345 - Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-. 7548390 Box, Packing, Ammo For Activator Practice M1. 7548
6、391 Container, Metal For Activator Practice M1. 9340668 Activator,Antitank Mine: Practice, M1, (Copies of specifications, standards and drawings required by manufacturers in connection with specific acquisition functions should be obtained from the contracting activity or as directed by the contract
7、ing officer. ) 2.1.3 Order of precedence. In the event of a conflict between the text of this specification and the references cited herein, the text of this specification shall take precedence. 3. REQUIREMENTS 3.1 Materials and parts. Materials and parts shall be in accordance with the applicable d
8、rawings, specifications and stana rs. 3.2 Activator assembly. The activator assembly shall comply with all requirements specified on Drawing (Dwg.) 9340668, all associated drawings, and with all applicable specifications and standards. 3.3 Output. The activator shall emit a smoke column of ten (10)
9、feet, minimum height, and be visible at a minimum distance of one hundred (100) meters at the end of one (1) second, maximum time, when tested as specified in 4.5.1. 3.4 First article inspection. This specification contains technical provisions for first article inspection. Requirements for the subm
10、ission of first article samples by the contractor shall be as specified in the contract. 3.5 Workmanship. The activator shall be fabricated and finished in a thorough, workmanlike manner. It shall be free of burrs, chips, sharp edges, cracks, unblended radii, surface defects, dirt, grease, rust, cor
11、rosion products, and other foreign matter. The cleaning method used shall riot be injurious to the device nor shall the parts be .contaminated by the cleaning agents. All require markings and stampings shall be neat and sharply defined. The activator shall be manufactured and processed in such a man
12、ner as to be uniform in quality, and free from defects that will affect life, configuration and serviceability. 4. QUALITY ASSURANCE PROVISIONS 4.1 Responsibility for inspection and standard quality assurance provisions. Unless otherwise specified herein or in the contract, the provisions of MIL-A-4
13、8078 shall apply and are hereby _ - made a part of-this detail specification. - Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-A-63529 13 7799706 0351867 4 4.2 Classification of inspections. The inspections specified herein are classitied as tol
14、lows: a. First article inspection (see 4.3). b. Quality conformance inspection (see 4.4). 4.3 First article inspection. . 4.3.1 Submission. The contractor shall submit a first article sample as designated by the Contracting Officer for evaluation in accordance with provisions of 4.3.2. The first art
15、icle sample shall consist of the following items in sample quantities as indicated below and Table 1. Part Description Body CUP Plug, Activator Fuse Cup, Closing Cup, Igniter Igniter Cup Assembly Activator, Practice: PI1 Draw i ng s 9340669 9340671 9340670 9340719 9 3407 20 9340721 9 3407 22 9340668
16、 Quant i ty 10 10 . 10 10 yo 10 10 30 4.3.2 Inspections to be performed. See MIL-A-48078 and Table I specified herein. 4.3.3 Rejection. See MIL-A-48078. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- _- MIL-A-63529 13 m 9999906 0351868 b m cv b t r
17、i : ri E al o -d U u m Li QI Li O u rd 3 4 U u 4 4 h . c. m w w w w w w w + . -1 h c c! . . . w w . rn U u al W al 5 Li -O rtu b WE O0 w 4 mu Qlm C rn 4.J u al W al a (0 4.J u a, rcl al 5 Li -0 mw Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- i ri
18、 c al u .FI JJ u m Li pc Li O cr m 3 .rl 4J u 4 h . MIL-A-b3527 33 = 9977906 O353869 8 (v h! (v h! m m m CI? mm . . 0. n m O O O O0 4 rl ri mm U - 10 cr u al W ai a Li -0 OW cv bc: 00 -r .FI mu Olm C 3m ox -w 6. u) r, u al W al a Li -O dW cv +C O0 * .FI m-U Olm c ox -W e- -?. Provided by IHSNot for
19、ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-A-b3529 13 W 7779706 0351870 4 W _ MIL-A-63529 (AR) 4.4 Quality conformance inspection. 4.4.1 Inspection lot formation. Inspection lots shall comply with the lot formation provisions of MIL-A-48078. 4.4.2 Examination. See
20、 MIL-A-48078. a. Sampling plans. Unless otherwise specified in the Classification of Defects and Tests Tables, sampling plans and procedures for major and minor defects shall be in accordance with MIL-STD-105, Inspection Level II. Provided by IHSNot for ResaleNo reproduction or networking permitted
21、without license from IHS-,-,-MIL-A-63527 13 7777906 0351871 b ri t i!i u h a O Ia :rl i; I. I * : 8 t u - mn Q, c 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-A-63529 13 999770b 0353872 c a O w c O E .u pY .ri I dl r h O ri a !e mmmm mmm m m
22、mm -nee -n aaaa aaa # dP# # # O000 O00 In InIn# *e*e *e w w-o O000 O00 o OO YUYV YYV . c LIE aw E: . almm a ac a al a-rl a LI a,E aa, c LI au u a- (UA Liu 4-i c o au CU .d “Q a, C O z - ,F c .ri 4 a II) Ici O 0 O c U a, E a, 3 -ri ci a C LI a, u rl m LI O w u) * d a, a, VI i5 a c L - 8 Provided by I
23、HSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-r Y n Y Y MIL-A-63529 13 9779906 0353873 T ri k ri k H c 4 E a U 4 OC alrn Lic um OE OL CU -64 o 3 Li ou do O0 Vpi tri C .rl + a E m rn W O a O c U 2 al 3 YI U m C Li al c, r( Id Li 0. CI Ln e * al a, m . m L 5 - Pr
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ARMYMILA635291982ACTIVATORANTITANKMINEPRACTICEM1PARTSFORANDLOADINGASSEMBLINGANDPACKING 实践 指出 反坦克 M1 激活

链接地址:http://www.mydoc123.com/p-440741.html