ARMY A-A-59786-2005 ADHESIVE (STRUCTURAL ADHESIVE)《胶粘剂(结构胶)》.pdf

《ARMY A-A-59786-2005 ADHESIVE (STRUCTURAL ADHESIVE)《胶粘剂(结构胶)》.pdf》由会员分享，可在线阅读，更多相关《ARMY A-A-59786-2005 ADHESIVE (STRUCTURAL ADHESIVE)《胶粘剂(结构胶)》.pdf（3页珍藏版）》请在麦多课文档分享上搜索。

1、 NOT MEASUREMENT SENSITIVEA-A-597869 DECEMBER 2005 COMMERCIAL ITEM DESCRIPTION ADHESIVE, (STRUCTURAL ADHESIVE) The General Services Administration has authorized the use of this Commercial Item Description by all federal agencies. 1. SCOPE. This commercial item description (CID) covers a general use

2、 adhesive for bonding composite materials. 2. SALIENT CHARACTERISTICS. 2.1 Specifications. Shall consist of the following: a. Viscosity: 100,000-125000 cP b. Working Time: 30-35 minutes c. Fixture time: 80-90 minutes d. Tensile Strength: 2000 psi nominal e. Shear strength: 1700 psi nominal f. Tensil

3、e Elongation: 130% nominal 3. REGULATORY REQUIREMENT. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR). 4. PRODUCT CONFORMANCE. 4.1 Product Conformance. The products prov

4、ided shall meet the salient characteristics of this Commercial Item Description, conform to the producers own drawings, specifications, standards and quality assurance practices and be the same product offered for sale in the commercial marketplace. The government reserves the right to require proof

5、 of such conformance. 4.2 Market Acceptability. The product shall be a standard commercial item or a modified commercial item to minimize design and engineering risk. A commercial item is required to Beneficial comments, recommendations, additions, deletions, clarifications, etc., and any other data

6、 which may improve this document should be sent by letter to: US Army Tank-automotive and Armaments Command, ATTN: AMSRD-TAR-E/268, 6501 E. 11 Mile Road Warren, MI 48397-5000. AMSC N/A FSC 8040 Distribution Statement A. Approved for public release; distribution is unlimited. Provided by IHSNot for R

7、esaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59786 2 ensure serviceability, reliability and quality of materials. Bid samples may be required for the Adhesive to ensure product quality. 5. PACKAGING. Preservation, packaging, packing and marking shall be specified in

8、the contract or order. 6. NOTES 6.1 Source of Documents. 6.1.1 Material Safety Data Sheet for Construction Adhesives may be obtained from ITW Plexus, 30 Endicott Street, Danvers, MA 01923, Telephone :1-888-783-7425 or at their website http:/ 6.1.2 The Code of Federal Regulations (CFR) may be obtaine

9、d from the US Government Printing Office, 732 Capitol Street NW, Washington, DC 20401 or at their website http:/www.gpoaccess.gov/cfr/index.html 6.2 Ordering Data. The contract or order should specify the following: a. CID document Number b. Product Conformance provisions c. Packaging requirements 6

10、.3 Products known to meet this CIDa. Plexus MA425 available from: ITW Plexus 30 Endicott Street Danvers, MA 01923 6.4 Key words. Construction adhesive Methacrylate Composite Thermoplastic Adhesive Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-5

11、9786 3 MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: GSA - FSS Custodians Army AT Preparing Activity: Navy - AS Army AT Air Force 11 (Project 8040- 2006-001) Review Activities Army MI, MR Navy CG Air Force 3, 84, 99 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-