ARMY A-A-52589-1996 OILERS AIR LINE FOR PNEUMATIC TOOLS《气动工具航空路线的注油器》.pdf

《ARMY A-A-52589-1996 OILERS AIR LINE FOR PNEUMATIC TOOLS《气动工具航空路线的注油器》.pdf》由会员分享，可在线阅读，更多相关《ARMY A-A-52589-1996 OILERS AIR LINE FOR PNEUMATIC TOOLS《气动工具航空路线的注油器》.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、A-A-52589 m 9999974 0270L24 74T m The Geners MEl-RJCI A-A-52589 February 15.1996 SUPERSEDING 12 April 1983 MIL-O- 134 17B COMMERCIAL ITEM DESCRIPTION OILERS, AIR LINE, FOR PNEUMATIC TOOLS Services Administration has authorized the use of this Commercial Item Description (CID) for all federal agencie

2、s. 1. SCOPE. This CID covers two sizes of oilers for use in the air lines of pneumatic tools. 2. CLASSIFICATION. The oilers shall be the following sizes, as specified (see 7.1): Size 1 - 1/4 liter (U2 pint) Size 2 - 1/2 liter (1 pint) 3. SALIENT CHARACTERISTICS 3.1 DescriDtion. The oilers shall atom

3、ize ,-id feed, in any position, any lubricant or liquid grease which is suitable for use in pneumatic tools in the temperature range of 43 degrees Celsius (“C) (1 10 degrees Fahrenheit (“F) to -32OC (-25F). The oilers shall be equipped with an adjustable oil-metering valve and an oil-filler plug. 3.

4、2 Material. Material shall be of the contractors current commercial product and shall be subjected to all provisions of this specification. 3.2.1 Material deterioration and control. The oilers shall be fabricated from compatible materials, inherently corrosion resistant or treated to provide protect

5、ion against the various forms of corrosion and deterioration that may be encountered in any of the applicable storage and operating environments to which the item may be exposed. Beneficial comments, recommendations, additions, deletions clarifications, etc. and any other data which may improve this

6、 document should be sent by letter to: U.S. Army Tank-automotive and Armaments Command, ATTN: AMSTA-TR-EBLUE, Warren, MI 48397-5000. DISTRTBUTION STATEMENT A. Approved for public release; distribution is unlimited. FSC 4930 Provided by IHSNot for ResaleNo reproduction or networking permitted without

7、 license from IHS-,-,- A-A-525B9 9999974 0170115 686 A-A- 5 25 89 3.2.1.1 Dissimilar metals. Dissimilar metais shall not be used in intimate contact with each other unless protected against galvanic corrosion. 3.2.1.2 Identification of materials and finishes. The contractor shall iden the specific m

8、aterial, material finish or treatment for use with components and sub-components, and shall make information available, upon request, to the contracting officer or designated representative. 3.2.2 Inserts. When the body of the oiler is aluminum, threaded steel inserts shall be used for the oil-filte

9、r and oil-regulator access holes and for the air line connections. 3.3 Temperature conditions. The oilers shall perform as specified herein in any ambient temperature from 38OC (1 00F) to -32OC (-25F) when filled with pneumatic-tool lubricant of viscosity suitable for the particular operating temper

10、ature. 3.4 Oil-metering; valve. The oil-metering valve shall be removable for cleaning and repairing and shall permit adjustment of the lubricant flow without taking the pressure off the air chamber or interrupting the operation of the pneumatic tool. 3.4.1 Locking device. The lubricator shall be su

11、pplied with a locking or tamper-proof, adjusting knob, which shall prevent oil flow changes resuIting from shock or vibration. 3.5 Oil-filler ulug. An oil-filler plug shall be provided with a hole for bleeding-off pressure inside the oil chamber before threads are disengaged. 3.6 Hvdrostatic pressur

12、e. The oilers shall withstand a hydrostatic pressure of 1034 kilopascals (kPa) (1 50 pounds per square inch (psi) with no sign of leaks or deformation. 3.7 Performance. 3.7.1 Pressure drou. The pressure drop across the oiler shall not exceed 35 a (5 psi) with accessories in place. 3.7.2 Pumping. The

13、re shall be no unatomized lubricant or excessive lubricant discharged beyond the normal atomized flow each time the valve is opened. 3.7.3 Flow. The oiler shall atomize a sufficient amount of lubricant to any tool that may be used in any position. 3.7.4 Lubricant leakage. There shall be no lubricant

14、 passed into the air passage fkom the oiler during static pressure. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-52589 3.8 Size 1 (114 liter capac ity2. The oiler shall provide constant and ample lubrication to the working parts of pneumatic

15、 tools with an air supply as low as 0.28 liter per min (l/min) (10 cubic feet per minute (cfm). The inlet and outlet shall be threaded as specified in the contract or order. When specified (see 7. i), the oiler shall have universal, quick-disconnect-type hose couplings for both the inlet and outlet

16、connections. I 3.9 Size 2 (i/ 2 Iiter capac it?). The oiler shall provide constant and ample lubrication to the working parts of pneumatic tools with an air supply as low as 1.13 Vmin (40 cfm). Threads shall be provided for both the inlet and outlet connections as specified in the contractor or orde

17、r. When specified (see 7.11, the oiler shall have universal, quick-disconnect-type hose couplings for both the inlet and outlet connections. 3.9.1 Bose assembl y. When specified (7.1), the oiler shall be provided with 3 meters (m) (10 feet (ft) of 19 millimeters (mm) (3/4-inch) air hose, and univers

18、al, quick-disconnect-type hose couplings for both ends. 3.10 Ycdmansh g. The quality of workmanship shall be such as to produce oilers that are in accordance with the requirements of this CID and are so constructed as to insure proper functioning of all parts of the oiler. 4. REGULATORY REQUIREMENTS

19、 ion. The offeror/contractor is encouraged to use recovered 4.1 rnonsibrlit- v for insoect materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR). . 5. QUALITY ASSURANCE PROVISIONS . 5.1 Contrac tor certifi cation. The contractor

20、shall certify and maintain substantiating evidence that the product offered meets the salient Characteristics of this CID, and that the product conforms to the producers own drawings, specifications, standards, and quality assurance practices. The Government reserves the right to require proof of su

21、ch conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. 6. PACKAGING. Preservation, packing, and marking shall be as specified in the contract or order. i 7. NOTES (This section contains information of a general or explanatory natu

22、re that may be helpful, but is not mandatory.) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-52589 = 9999974 OL7OLL7 459 E A-A-52589 - 7. i Acauisition data. Acquisition documents should spec the following: a. Title, number, and date of this CI

23、D. b. Size oiler required. c. Outlet and inlet connections required for size 1 oiler. d. Outlet and inlet connections required for size 2 oiler. e. When hose is required for size 2 oiler. f Selection of applicable level and packa,&g requirements. 7.2 Part or identification number IPDQ . The PINS to

24、be used for oilers acquired to this CID are created as follows: L Size (see 1.2). -i” CID number. I 1- Designates a CID. 7.3 Cross-reference data. Oilers conforming to this CID are interchangeable/substitutable with oilers conforming to MIL-0-13417B. 7.4 The Code of Federal Regulations (CFR) may be

25、obtained from the Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402. MILITARY INTERESTS: Custodians: Army - AT Navy - MC Review Activity: DLA - CS CTVIL AGENCY COORDINATING ACTIVITY: GSA - FSS Preparing Activity: Army - AT (Project 4930-00 15) 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-