ARMY A-A-52097-1991 CLOTH WIGAN COTTON《无光上浆衬里棉布》.pdf

《ARMY A-A-52097-1991 CLOTH WIGAN COTTON《无光上浆衬里棉布》.pdf》由会员分享，可在线阅读，更多相关《ARMY A-A-52097-1991 CLOTH WIGAN COTTON《无光上浆衬里棉布》.pdf（4页珍藏版）》请在麦多课文档分享上搜索。

1、 A-A-52077 83 W 7777774 0060847 4 W A-A-52097 March 26, 1991 CK“XIAL ITEM DECCRIF“ The General Services Mministration has authorized the use of this camemial item description in preference to Military Specification MIL-C-16375. Abstract. inteded for use as interlining material for armsleeve cuffs, c

2、ollars, and other various areas of clothing. Tkis carmercial item description covers cotton Wigan cloth 1. CLASSIFICATION 1.1 Classification. This ccamiercial item description covers cotton Wigan cloth in the following types as specified (see 5.1). Type I - 2.3 OZ. per q. yd. Type II - 3.4 oz. per s

3、q. yd. 2. SALIENT -SICS 2.1 General description. woven from cotton which has been carded, drawn and spun into singles yarn. The width shall be as specified (see 5.1) and shall be the minimum acceptable width inclusive of the selvage when fly-shuttle lm or shuttleless loonis with tuck-in selvages are

4、 used. For all other shuttleless 1- the width measurement shall be made between the last warp yarn on each side excluding the protruding fringe(s). The color of the finished cloth shall be natural or dyed as specified (see 5.1) and shall match the standard sample when viewed under filtered tungsten

5、lamps that approximate artificial daylight and that have a correlated color temperature of 7500 f 200K, with illumination of 100 -F. 20 foot candles, and shall be a good match to the standard sample under incandescant lanplight at 2300 f 2OOK. The use of dyes and ccanpounds containing elementary sul

6、fur capable of oxidation to sulfuric acid is prohibited. The cloth shall have a fim, plain calender finish. 0 The cloth shall be plain weave, one up-one down, Beneficial camients, recarmendations, additions, deletions, clarifications, etc., and any other data which may improve this docwent should be

7、 sent to: Comnander, U.S. Army Natick Research, Developnt, and Engineering Center, Am: SlX?X-IKF., Natick, MA 01760-5019. AMSC N/A FSC 8305 DISRIBITTIN SF.AT%MEC?F A. iQproved for public release; distribution is unlimited. O Provided by IHSNot for ResaleNo reproduction or networking permitted withou

8、t license from IHS-,-,- - - A-A-52097 83 9999974 00b0850 O A-A-52097 2.2 Physical requirements. The finished cloth shall conform to the requirements listed in table I. TAEU3 I. Physical Requirements Requiremnts Characteristic TWEI Type II Test method i/ Material Colorfastness to: Laundering Perspira

9、tion Wet drycleaning Labile sulfur content Weight, oz./sq.yd. (min) Yarns per inch (min) : warp Filling Breaking strength, lbs. (min): warp Filling Cotton Fair Good Good - 2/ 2.3 30 32 30 20 Cotton Fair Good Good - 2/ 3.4 46 38 48 22 1200 56 10 5680 5622 2020 504 1 5050 5050 5100 5100 - i/ The test

10、methods indicated, from FED-STD-191 Textile Test Methods, have been found acceptable to determine if the cloth mets the stated requirements. If the government requires proof that the cloth mets the stated requirements, the test methods indicated shall be used. - 2/ The dyed and finished cloth shall

11、contain no more labile sulfur than sham by stan- sample. cloth shall Shaw not mre than a “slight“ trace of labile sulfur as defined in the test method. When a stan- sample is not available the 2.3 Lenqth and put-up. shall be furnished in continuous lengths each not less than 40 yards. cloth shall be

12、 put-up full width on rolls as specified in 4.1. Unless otherwise specified (see 5.1), the cloth The 3. QUATJITY ASSURANCE 3.1 Certification. The contractor shall certify, and maintain substanti- ating evidence that the product offered meets the salient characteristics and requirements of this Comer

13、cial Item Description, and that the product conforms to the producers awn drawings, specifications, standards, and quality assurance practices. proof of such conform-ance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract, The government rese

14、rves the right to require 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-52097 83 m 9999974 0060851 2 m A-A-52097 3.2 Visual examination. MIL-SID-105. level (AQL) , expressed in tenns of defects per hundred units, shall be 4. O. The lot size s

15、hall be expressed in units of yards. one linear yard. hole, cut, tear, smash, knots, missing end or pick, embedded crease or wrinkle, slubs, slugs, spots or stains and uneven dying. Lots of cloth shall be inspected in accordance with The insmion level shall be I and the acceptable quality The cloth

16、shall be examined for the following defects: The sample unit shall be 3.3 LRnqth examination. During the visual examination, each roll in the sample shall be examined for length. minimum specified or more than 2 yards less than the length marked on the roll ticket shall be considered a length defect

17、. sample are defective with respect to length or if the total of the actual lengths of rolls in the sample is less than the total of lengths marked on the roll tickets, the lot shall be rejected. Any length found to be less than the If two or more rolls in the 3.4 Requlatorv remirementS. The offeror

18、/contractor is encouraged to use recovered material in accordance with Public Law 94-580 to the maximum extent practicable. 4. PAMAGING 4.1 Packaqinq. chipboard tube. prevent the fibers of the chipboani from transferring to the cloth. roll of cloth, put-up as specified, shall be wrap with 60-pound m

19、inimum basis weight kraft paper in such a way that the paper shall encircle the roll at least once with a minimum overlap of 3 inches, and the width of the paper shall be sufficient to fold over and protect the ends of the roll. Gumned paper tape, with a minimumwidth of 2-1/2 inches shall be applied

20、 to the overlap seam the full length of the roll and across each end. Altemately, each roll of cloth shall be enclosed in a polyethylene film tube and the tube secured at both ends by heat sealing or mechanical ties. The cloth shall be rolled on a convolute or spiral-wound The tube shall have a smoo

21、th finish surface that will Each 4.2 Packinq. Each wram roll shall be enclosed in a bias-sewn tubing made frmwoven polwrowlene cloth. by means of a mechanical tie, or by plastic ties with lock-end. Alternately, a maximum of 325 pounds of rolls of kraft-wrappe cloth shall be packed in a snug-fitting

22、double-walled fibeUments order Desk Building 4D 700 Robbins Avenue Philadelphia, PA 19111-5094 MILITARY IiVlERl3S“S: CIVIL AGENCY OOORDINATING AC?I?MTY: (5ustodians GSA - Fss Army-(= PREPARING AC?I?MTY: Navy-Nu Air Force - 99 Army-(= Review Activities Project 8305-0373 Army-m DLA - CT User Activity 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-