ARMY A-A-50149-1988 VASE CHAPEL ALTAR《礼拜堂花瓶》.pdf

《ARMY A-A-50149-1988 VASE CHAPEL ALTAR《礼拜堂花瓶》.pdf》由会员分享，可在线阅读，更多相关《ARMY A-A-50149-1988 VASE CHAPEL ALTAR《礼拜堂花瓶》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、A-A-50 149 2anusi-y 21, 1988 COMMERCIAL ITEM DESCRIPTION VASE, CHAPEL, ALTAR The General Services Administration has authorized the use of this commercial item description in preference to MIL-V-43535. 1. SALIENT CHARACTERISTICS 1.1 Design and construction. The vase shall be fabricated of commercial

2、 brass with a chromium plate finish. All exterior surfaces shall be brass, chromium plated, Materials not definitely specified shall be of the quality normally used for the purpose in commercial practice. The vase shall measure approximately 10 inches in height from base to top; 4-3/4 inches across

3、the top; with a 5-inch diameter round base. The base shall be solid and flat, i.e. not footed. The vase shall be fabricated to include a removable, anodes coated liner. The liner shall be approximately 7 inches in height; 4 inches across the tap with a tapered base measuring 2 inches. The vase shall

4、 contain no religious markings. 2. QUALITY ASSURANCE 2.1 Certification. The contractor shall certify that the product offered meets the salient characteristics of the description and conforms to the producers own drawings, specifications, standards, and quality assurance practices, and is the same a

5、s the product offered for sale in the commercial marketplace. When specific quality assurance provisions are specified for any commercial characteristic the contractor shall furnish data resulting from inspection conducted in accordance with the specific quality assurance provisions. The Government

6、reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. 3. PACKAGING 3.1 Packaging. Cushioning material shall be placed between the vase body and the vase liner to immobilize and afford prot

7、ection against abrasion during shipment and storage. Each vase shall be placed in a clear plastic bag and then packed, in pairs, into a snugifitting fiberboard box. Cushioning shall be applied, as necessary, to immobilize the vases and fill voids in the box. FSC 9925 DISTRIBUTION STATEMENT A. Approv

8、ed for public release; distribution is unlimited. 7 -I- _- THIS DOCUMENT CONTAINS 2 PAGES. - - = - _= _ - , Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-50149 99 M 7797374 0049183 7 -5 A-A-50149 3.2 Packing. Twenty vases, packed as specified,

9、shall be packed in a snug- fitting RSC style shipping container conforming to type CF, (variety SW) or SF, class domestic, grade 275 of PPP-B-636. completely filled with no voids and of a size that can be palletized in accordance with the appendix of PPP-B-636. The shipping container shall be 3.3 Pa

10、lletization. pallet in accordance with load type Ia of MIL-STD-147. be bonded by means K and L, or O or P, in accordance with MIL-STD-147. When specified, vases shall be palletized on a 4-way entry Each prepared load shall 3.4 Marking. purchmer, unit packs, shipping containers and unitized pallet lo

11、ads shall be marked in accordance with MIL-STD-129. In addition to any special marking required by the contract or 4. NOTES 4.1 in Military chapels. Intended use. The vase is intended to be used to hold flowers on the altar 4.2 Ordering data. Title, number, and date of this document. MILITARY INTERE

12、STS: CIVIL AGENCY COORDINATING ACTIVITY: Custodians GSA - FSS Army - GL Navy - PE Air Force - 28 PREPARING ACTIVITY: Army - CL Review activities Project No. 9925-1001 DLA - GS Armed Forces Chaplains Board 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-