ARMY A-A-50135-1987 CLOTH INTERLINING POLYESTER《涤纶夹层布》.pdf

《ARMY A-A-50135-1987 CLOTH INTERLINING POLYESTER《涤纶夹层布》.pdf》由会员分享，可在线阅读，更多相关《ARMY A-A-50135-1987 CLOTH INTERLINING POLYESTER《涤纶夹层布》.pdf（3页珍藏版）》请在麦多课文档分享上搜索。

1、1 i c s COMMERCIAL ITEM DESCRIPTION CLOTH, INTERLINING, POLYESTER The General Cervices Administration has authorized the use of this commercial item description in preference to Military Specification MIL-C-43594. 1. SALIENT CFIARACTERISTICS 1.1 Cloth, interlining, polyester. Material - Polyester Ya

2、rn - Multifilament Weave - Plain Weight ASTM D 3776) - 3.3 oz. per sq. yd., min. Fabric count (ASTM D 3775) - 57 ends and 37 picks per inch, min. Breaking strength (ASTM D 1682, section 16) - Warp 190 lbs., min. Shrinkage (AATCC 135, procedure IIB) - Warp - 2.0% max. Warp stiffness (FED-STD-191, Met

3、hod 5202) - 0.0030 inch pounds, min,. Finish - None Color - Natural Width - As specified Put-Up - 40 yd. min. continuous lengths put up in rolls weighing Filling 150 lbs., min. Filling - 2.0% max. 0.0120 inch pounds, max. approximately 125 lbs. each. 2. QUALITY ASSURANCE 2.1 Certification. The contr

4、actor shall certify that the product offered meets the salient characteristics of the description and conforms to the producers own drawings, specifications, standards, and quality assurance practices, and is the same as the product offered for sale in the commercial marketplace. When specific quali

5、ty assurance provisions are specified for any commercial charac- teristic the contractor shall furnish data resulting from inspection conducted in accordance with the specific quality assurance provisions. The Government reserves the right to require proof of such conformance prior to first delivery

6、 and thereafter as may be otherwise provided for under the provisions of the con trac t. FSC 8305 DISTRIBUTION STATEMENT A. Approved for public release: distribution is unlimited. - _ ,*_ 1 THIS DOCUMENT CONTAINS 3 PAGES. , - =_ - Provided by IHSNot for ResaleNo reproduction or networking permitted

7、without license from IHS-,-,- - - k I - - _- s A-A-50135 83 w=mm OOWLL o m .c/ A-A-50135 3. PACKAGING 3.1 Packaging. Cloth shall be rolled on a convolute or spiral-wound chipboard tube. The tube shall have a smooth finish surface that will prevent the fibers of the chipboard from transferring to the

8、 cloth. Each roll of cloth, put-up as specified, shall be wrapped with 60-pound minimum basis weight kraft paper such that the paper will encircle the roll at least once with a minimum overlap of 3 inches and the width of the paper will be sufficient to fold over and protect the ends of the roll. Gu

9、mmed paper tape, with a minimum width of 2-1/2 inches, shall be applied to the overlap seam the full length of the roll and across each end. 3.2 Packinq. lene film tube with a minimum thickness o 0.004 inches or each wrapped roll shall be enclosed in bias-sewn tubing made from woven polypropylene cl

10、oth. tube shall be secured by heat-sealing, by means of a mechanical tie, or by plastic ties with a lock end. Alternatively, a maximum of four rolls of kraft wrapped cloth shall be packed in a snug-fitting double-walled fiberboard container known as a double cover. joined liner and two covers. stren

11、gth of 500 pounds shall be used. metallic straps not less than 1/2 by 0.020 inch or non-metallic straps not less than 7/16 by 0.030 inch. 3.3 Markinq. In addition to any special markings required by the-contract or purchase order, rolls and shipping containers shall be marked in accordance with MIL-

12、STD-129. Each roll shall have a piece ticket (identification tag) affixed with a 5-ply minimum cotton string or a plastic tag hanger. The ticket shall have a reinforced eyelet and shall be legibly printed, using water soluble ink, with the following information: 0 Each wrapped roll shall be enclosed

13、 in a close-fitting polyethy- The The container shall consist of a body or Corrugated fiberboard with a minimum bursting The container shall be strapped with Procurement agency Contract or purchase order number National stock number item description Roll number Width Lot number Contrac tor Piece num

14、ber Fiber content Yardage Finish or griege mill 4. NOTES 4.1 Intended use. 4.2 Ordering data. The cloth is used as interlining for clothing. a. Title, number, and date of this document. b. Width of cloth required (see 1.1). 2 Provided by IHSNot for ResaleNo reproduction or networking permitted witho

15、ut license from IHS-,-,-. Custodians A-A- 501 35 4.3 Sources for nongovernment association documents. American Society for Testing and Materials (ASTM) 1916 Race Street Philadelphia, PA 19103 - American Association of Textile Chemists and Colorists (AATCC) P.O. Box 12215 Research Triangle Park, NC 2

16、7709 MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: GSA - FSS Army - GL Navy - NU Air Force - 11 Review activities Army - MD Navy - MC Air Force - 82 OLA - CT PREPARING ACTIVITY: Army - GL Project No. 8305-0130 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-