ARMY A-A-50030 A-1988 SLICING MACHINE BUN《面包切分机》.pdf
《ARMY A-A-50030 A-1988 SLICING MACHINE BUN《面包切分机》.pdf》由会员分享,可在线阅读,更多相关《ARMY A-A-50030 A-1988 SLICING MACHINE BUN《面包切分机》.pdf(4页珍藏版)》请在麦多课文档分享上搜索。
1、i ! I l L- 73-20 A-A-50030A 73 7779774 0037474 3 m - A-A50030A April 15, 1988 SUPERSEDING A-A-50030 August 27, 1982 COMMERCIAL ITEM DESCRIPTION SLICING MACHINE, BUN The General Services Administration has authorized the use of this commercial item description in preference to Military specification
2、MIL-S-43818. 1. SALIENT CHARACTERISTICS. 1.1 Design and construction. The bun slicing machine shall consist of a feeding chute tilted at a 25 to 35 degree vertical angle with the machine base and a circular cutting blade rotated by an electric motor. The motor shall be at least 1/4 horsepower and sh
3、all Se controlled by an on-off switch provided with a safety guard cover located on the body of the bun slicing machine accessible to the operator. The feeding chute shall have adjustments for bun width and height, and thickness and depth of cut. The feeding chute interior width shall be infinitely
4、adjustable from a lower limit of no more than 1-1/4 inches to an upper limit of no less than 5 inches. The feeding chute interior height shall be infinitely adjustable from a lower limit of no more than 1-3/4 inches to an upper limit of no less than 2-3/4 inches. The cutting blade height shall be in
5、finitely adjustable from a lower limit of no more than 1/2 inch above the base of the chute to an upper limit of no less than 15/16 inch above the base of the chute. The bun slicing machine shall be a counter model with 4 non-skid feet, and shall have envelope dimensions no greater than 36 inches wi
6、de, 15 inches deep, and 25 inches high. No tools or excessive force shall be required to make adjustments on the bun slicing machine, and during adjustment there shall be no binding or jamming of moving parts. The bun slicing machine shall be capable of slicing both soft and hard buns and rolls with
7、out jamming or stalling, and without tearing or crushing the buns or rolls. When the machine is switched on, the cutting blade shall rotate such that, within the chute, the cutting edge travels away frcm the bun inlet. The cutting teeth or serrations, as applicable, shall have their cutting edge fac
8、ing the same direction as the blade travels. FSC 7320 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. K . THIS DOCUMENT ClNTAINS 9 PAGES. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-50030A 73 W 49999iLi 001i7
9、475 5 W 1.2 Electrical characteristics. The bun slicing machine shall be designed for operation on a nominal 120 volt, 60 hertz, i phase alternating current. 1.3 Standards compliance. The bun slicing machine shall comply with Underwriters Laboratories, Inc. (UL) Standard No. 763 and Baking Industry
10、Sanitation Standards Committe (BISCC) Standard No. 13. 1.4 Data name plate (Government unique requirement (see 4.4). The bun slicing machine shall be furnished with a data name plate in accordance with the applicable requirements of MIL-STD-130 except the requirements for: Methods of applying, (b) I
11、dentification tags, (cl Information not required, and (d) Optional marking information shall not apply. shall be made of minimum 20 gage corrosion-resisting metal, and attached to the bun slicing machine by rivets, screws, or by welding, in such a manner as to meet the applicable National Sanitation
12、 Foundation requirements for this equipment. stamped, engraved, or applied by photosensitive means: (a) The data name plate The plate shall bear the following information which shall be National Stock Number Procurement Contract Number Specification Data Manufacturers Name, Address, and Telephone Nu
13、mber Suppliers Name, Address, and Telephone Number (List only if different from Manufacturers Model Number Government Approved Manual Number (when specified, see 4.2) Manufacturer) Each plate shall be placed so that it is readily visible to the operator during normal operating use and so as to not a
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- ARMYAA50030A1988SLICINGMACHINEBUN 面包 切分 PDF

链接地址:http://www.mydoc123.com/p-439755.html