ANSI INCITS460-2011 Information technology - Fibre Channel - Physical Interface - 3 (FC-PI-3)《信息技术.光纤通道.物理接口 -3(FC-PI-3)》.pdf

《ANSI INCITS460-2011 Information technology - Fibre Channel - Physical Interface - 3 (FC-PI-3)《信息技术.光纤通道.物理接口 -3(FC-PI-3)》.pdf》由会员分享，可在线阅读，更多相关《ANSI INCITS460-2011 Information technology - Fibre Channel - Physical Interface - 3 (FC-PI-3)《信息技术.光纤通道.物理接口 -3(FC-PI-3)》.pdf（70页珍藏版）》请在麦多课文档分享上搜索。

1、American National StandardDeveloped byfor Information Technology Fibre Channel Physical Interface-3 (FC-PI-3)INCITS 460-2011INCITS 460-2011Copyright American National Standards Institute Provided by IHS under license with ANSI Not for ResaleNo reproduction or networking permitted without license fro

2、m IHS-,-,-Copyright American National Standards Institute Provided by IHS under license with ANSI Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-INCITS 460-2011American National Standardfor Information Technology Fibre Channel Physical Interface-3(FC-PI-3)Secretar

3、iatInformation Technology Industry CouncilApproved June 28, 2011American National Standards Institute, Inc.AbstractThis standard describes the alpha point to delta point physical interface portions of the 10GFC Fibre Chan-nel and 10 GbE serial electrical and optical link variants that support the hi

4、gher level Fibre Channel andEthernet protocols. This standard is recommended for new implementations but does not obsolete existingFibre Channel standards.Copyright American National Standards Institute Provided by IHS under license with ANSI Not for ResaleNo reproduction or networking permitted wit

5、hout license from IHS-,-,-Approval of an American National Standard requires review by ANSI that therequirements for due process, consensus, and other criteria for approval havebeen met by the standards developer.Consensus is established when, in the judgement of the ANSI Board ofStandards Review, s

6、ubstantial agreement has been reached by directly andmaterially affected interests. Substantial agreement means much more thana simple majority, but not necessarily unanimity. Consensus requires that allviews and objections be considered, and that a concerted effort be madetowards their resolution.T

7、he use of American National Standards is completely voluntary; theirexistence does not in any respect preclude anyone, whether he has approvedthe standards or not, from manufacturing, marketing, purchasing, or usingproducts, processes, or procedures not conforming to the standards.The American Natio

8、nal Standards Institute does not develop standards andwill in no circumstances give an interpretation of any American NationalStandard. Moreover, no person shall have the right or authority to issue aninterpretation of an American National Standard in the name of the AmericanNational Standards Insti

9、tute. Requests for interpretations should beaddressed to the secretariat or sponsor whose name appears on the titlepage of this standard.CAUTION NOTICE: This American National Standard may be revised orwithdrawn at any time. The procedures of the American National StandardsInstitute require that act

10、ion be taken periodically to reaffirm, revise, orwithdraw this standard. Purchasers of American National Standards mayreceive current information on all standards by calling or writing the AmericanNational Standards Institute.American National StandardPublished byAmerican National Standards Institut

11、e, Inc.25 West 43rd Street, New York, NY 10036Copyright 2011 by Information Technology Industry Council (ITI)All rights reserved.No part of this publication may be reproduced in anyform, in an electronic retrieval system or otherwise,without prior written permission of ITI, 1101 K Street NW, Suite 6

12、10 Washington, DC 20005. Printed in the United States of AmericaCAUTION: The developers of this standard have requested that holders of patents that may be re-quired for the implementation of the standard disclose such patents to the publisher. However, nei-ther the developers nor the publisher have

13、 undertaken a patent search in order to identify which, ifany, patents may apply to this standard. As of the date of publication of this standard, followingcalls for the identification of patents that may be required for the implementation of the standard,notice of one or more such claims has been r

14、eceived. By publication of this standard, no positionis taken with respect to the validity of this claim or of any rights in connection therewith. The knownpatent holder(s) has (have), however, filed a statement of willingness to grant a license underthese rights on reasonable and nondiscriminatory

15、terms and conditions to applicants desiring to ob-tain such a license. Details may be obtained from the publisher. No further patent search is con-ducted by the developer or publisher in respect to any standard it processes. No representation ismade or implied that this is the only license that may

16、be required to avoid infringement in the use ofthis standard.Copyright American National Standards Institute Provided by IHS under license with ANSI Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-ixContents1 Scope . . . . . . . . . . . . . . . . . . . . . . . . .

17、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.1 Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

18、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.2 Normative references . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22.3 Informative references. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

19、. . . . . . . . . . . . . . . . 23 Definitions and conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23.1 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20、 . 23.2 Editorial conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53.2.1 Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53.2.2 Abbreviations, acronym

21、s, and symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53.2.2.1 Acronyms and other abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53.2.2.2 Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

22、. . . . . . . . . . . . . . . . 64 High Speed Electrical Specification XFI+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74.1 XFI+ applications definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74.2 XFI+ Term

23、ination and DC Blocking (informative) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84.3 XFI+ Jitter Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94.4 XFI+ Compliance Channel (informative) . . . . . . . . . .

24、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94.5 XFI+ ASIC/SerDes Specification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114.5.1 XFI+ ASIC/SerDes Transmitter Output Specifications at A (Informative). . . . . . . . . . 114.5.2 XFI+ ASIC/SerD

25、es Receiver Input Specifications at D (Informative) . . . . . . . . . . . . . 124.6 XFI+ Host Specification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144.6.1 XFI+ Host Transmitter Output Specifications at B . . . . . . . . . . . . . . . . .

26、. . . . . . . . . . 154.6.2 XFI+ Host Receiver Input Specifications at C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164.7 XFI+ Module Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174.7.1 XFI+ Module Transmitter Input

27、Specifications Points B and B“ . . . . . . . . . . . . . . . . . 174.7.2 XFI+ Module Receiver Output Specifications at C. . . . . . . . . . . . . . . . . . . . . . . . . . . 194.8 Signal Conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

28、 . . . . 204.8.1 Datacom module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214.8.2 Telecom Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214.9 Reference Clock Specificatio

29、ns. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224.10 Optional Synchronous CMU Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Annex A Compliance Test Points and Boards (Normative). . . . . . . . . . . . . . . . .

30、 . . . . . . . . 25A.1 XFI+ Test Points Definition and Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25A.1.1 Host Compliance Points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25A.1.2 Module Compliance Points. . . . . .

31、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26A.1.3 ASIC/SerDes Test Points (Informative) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27A.1.4 Host Input Calibration Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

32、. . . . . . . . . . 27A.1.5 Module Input Calibration Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28A.2 Compliance Boards Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28A.2.1 Host Compliance Board Transf

33、er Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . 28A.2.2 Module Compliance Board Transfer Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . 29A.2.3 ASIC/SerDes Test Board Transfer Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 30A.3 Specif

34、ications for Mated Host and Module Compliance Boards . . . . . . . . . . . . . . . . . . . . . 30Annex B XFI+ Channel Measurements and Modeling (Informative) . . . . . . . . . . . . . . . . . . 36B.1. System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

35、 . . . . . . . . . . . . 36B.1.1 Design Guideline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Copyright American National Standards Institute Provided by IHS under license with ANSI Not for ResaleNo reproduction or networking permitted

36、without license from IHS-,-,-xB.1.2 Using System Simulation for Channel Modeling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Annex C Differential S-Parameters and TDR (Informative) . . . . . . . . . . . . . . . . . . . . . . . . . . 40C.1 Choosing S-Parameters vs TDR . . . . . . . .

37、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40C.1.1 Differential Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41C.1.2 4-Port Single-Ended S-Parameter Definition . . . . . . . . . . . . . . . . . . . . . . . . .

38、 . . . . . . . 42C.1.3 2-Port Mixed Mode Differential S-Parameter Definition . . . . . . . . . . . . . . . . . . . . . . . . 42C.2 Optimum Via Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43C.2.1 Vias. . . . . . . . . . . . . . . . .

39、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43C.2.1.1 Single-ended Vias . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43C.2.1.2 Differential Vias . . . . . . . . . . . . . . . . . . . . . . . . . . . .

40、 . . . . . . . . . . . . . . . . . . . . . .45C.2.1.3 GSSG Differential Vias. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47Annex D Jitter Methodology and Measurement (Normative) . . . . . . . . . . . . . . . . . . . . . . . . 49D.1 Eye Mask Compliance. .

41、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49D.2 Non-EQJ Jitter Eye Mask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50D.3 Stress Eye Test for RX Tolerance Testing . . . . . . . . . . . . . .

42、 . . . . . . . . . . . . . . . . . . . . . . 51D.3.1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51D.3.2 Test equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

43、 . . . .51D.3.3 Types of jitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51D.3.4 Calibration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52D.3.5 Testing . . . .

44、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52D.4 Jitter Peaking Specifications and Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52D.4.1 Overall System Measurement . . . . . . . . . . . . . . . . . . .

45、 . . . . . . . . . . . . . . . . . . . . . . . 53D.4.2 Module Total Jitter Peaking Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53D.4.3 Measurement of Module Signal Conditioner. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53D.5 Definition of AC comm

46、on mode voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53D.5.1 AC common mode generation test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54D.5.2 AC common mode tolerance test . . . . . . . . . . . . . . . . . . . . . . . . . . .

47、 . . . . . . . . . . . . . 54D.6 Termination Mismatch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54Copyright American National Standards Institute Provided by IHS under license with ANSI Not for ResaleNo reproduction or networking permitted

48、without license from IHS-,-,-xiiList of TablesTable 1. Acronyms and other abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5Table 2. Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

49、 . . . .6Table 3. XFI+ supported data rates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Table 4. Loss budget allocation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Table 5. Common host board configurations . . . . . . . . . . . . . . . . . .