ANSI INCITS 512-2015 Information Technology C Fibre Channel C Physical Interface-6 (FC-PI-6)《信息技术 光纤通道物理接口6(FC-PI-6)》.pdf

《ANSI INCITS 512-2015 Information Technology C Fibre Channel C Physical Interface-6 (FC-PI-6)《信息技术 光纤通道物理接口6(FC-PI-6)》.pdf》由会员分享，可在线阅读，更多相关《ANSI INCITS 512-2015 Information Technology C Fibre Channel C Physical Interface-6 (FC-PI-6)《信息技术 光纤通道物理接口6(FC-PI-6)》.pdf（66页珍藏版）》请在麦多课文档分享上搜索。

1、American National StandardDeveloped byfor Information Technology Fibre Channel Physical Interface-6 (FC-PI-6)INCITS 512-2015INCITS 512-2015INCITS 512-2015American National Standardfor Information Technology Fibre Channel Physical Interface-6 (FC-PI-6)SecretariatInformation Technology Industry Counci

2、lApproved January 28, 2015American National Standards Institute, Inc.AbstractThis standard describes the point-to-point physical interface portions of Fibre Channel serial electricaland optical link variants that support the higher level Fibre Channel protocols. This standard is recom-mended for new

3、 implementations but does not obsolete existing Fibre Channel standards.Approval of an American National Standard requires review by ANSI that therequirements for due process, consensus, and other criteria for approval havebeen met by the standards developer.Consensus is established when, in the jud

4、gement of the ANSI Board ofStandards Review, substantial agreement has been reached by directly andmaterially affected interests. Substantial agreement means much more thana simple majority, but not necessarily unanimity. Consensus requires that allviews and objections be considered, and that a conc

5、erted effort be madetowards their resolution.The use of American National Standards is completely voluntary; theirexistence does not in any respect preclude anyone, whether he has approvedthe standards or not, from manufacturing, marketing, purchasing, or usingproducts, processes, or procedures not

6、conforming to the standards.The American National Standards Institute does not develop standards andwill in no circumstances give an interpretation of any American NationalStandard. Moreover, no person shall have the right or authority to issue aninterpretation of an American National Standard in th

7、e name of the AmericanNational Standards Institute. Requests for interpretations should beaddressed to the secretariat or sponsor whose name appears on the titlepage of this standard.CAUTION NOTICE: This American National Standard may be revised orwithdrawn at any time. The procedures of the America

8、n National StandardsInstitute require that action be taken periodically to reaffirm, revise, orwithdraw this standard. Purchasers of American National Standards mayreceive current information on all standards by calling or writing the AmericanNational Standards Institute.American National StandardPu

9、blished byAmerican National Standards Institute, Inc.25 West 43rd Street, New York, NY 10036Copyright 2015 by Information Technology Industry Council (ITI)All rights reserved.No part of this publication may be reproduced in anyform, in an electronic retrieval system or otherwise,without prior writte

10、n permission of ITI, 1101 K Street NW, Suite 610, Washington, DC 20005. Printed in the United States of AmericaCAUTION: The developers of this standard have requested that holders of patents that may be re-quired for the implementation of the standard disclose such patents to the publisher. However,

11、 nei-ther the developers nor the publisher have undertaken a patent search in order to identify which, ifany, patents may apply to this standard. As of the date of publication of this standard, followingcalls for the identification of patents that may be required for the implementation of the standa

12、rd,notice of one or more such claims has been received. By publication of this standard, no positionis taken with respect to the validity of this claim or of any rights in connection therewith. The knownpatent holder(s) has (have), however, filed a statement of willingness to grant a license underth

13、ese rights on reasonable and nondiscriminatory terms and conditions to applicants desiring to ob-tain such a license. Details may be obtained from the publisher. No further patent search is con-ducted by the developer or publisher in respect to any standard it processes. No representation ismade or

14、implied that this is the only license that may be required to avoid infringement in the use ofthis standard.iContents1 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Normative references . . . . . . . .

15、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.2 Normative references . . . . . . . . . . . . . . . . . . .

16、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.2.1 Approved references . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.3 References under development . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

17、 . . . . . . . . . 23 Definitions and conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.1 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.2 Edito

18、rial conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113.2.1 Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113.2.2 Keywords . . . . . . . . . . . . . .

19、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113.2.3 Abbreviations, acronyms, and symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123.2.3.1 Acronyms and other abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . . .

20、 . . . . . . . . 133.2.3.2 Signaling rate abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143.2.3.3 Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 FC-PI-6 functional characteri

21、stics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154.1 General characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154.2 FC-0 states . . . . . . . . . . . . . . . . . . . . . . . . . . . .

22、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174.2.1 Transmitter states . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174.2.2 Receiver states . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

23、 . . . . . . . . . . . . . 174.3 Limitations on invalid code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174.4 Receiver stabilization time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174.5 Loss o

24、f signal (Rx_LOS) function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174.6 Speed agile ports that support speed negotiation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174.7 Transmission codes . . . . . . . . . . . . . . . . . . . . . . .

25、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184.8 Frame scrambling and emission lowering protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184.9 Speed negotiation and transmitter training . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184.

26、10 Forward error correction (FEC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194.11 Test patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194.12 Fibre Channel variants nomenclatur

27、e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194.13 FC-PI-6 variants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215 Optical interface specification . . . . . . . . . . . . . . . . . . . . . . . . .

28、. . . . . . . . . . . . . . . . . . . . . . 235.1 TxRx connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235.2 Laser safety issues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

29、 . . . . . 235.3 SM data links. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235.3.1 SM general information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235.3.2 SM optical output

30、interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245.3.3 SM optical input interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255.4 MM data links . . . . . . . . . . . . . . . . . . . . . . . . . . .

31、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255.4.1 MM general information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255.4.2 MM optical output interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

32、 . . . . . . 265.4.3 MM optical input interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276 Electrical interface specification - single lane variants . . . . . . . . . . . . . . . . . . . . . . . . . . . 286.1 General electrical characteristics . .

33、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286.2 Compliance test point definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286.2.1 Test method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

34、 . . . . . . . . . . . . . . . . . . . . 28ii6.2.2 Host test points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 296.2.3 Module test points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

35、 . . .296.2.4 Host input calibration point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 306.2.5 Module input calibration point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 306.3 Transmitted signal characteristics .

36、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 326.4 Receive signal characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .336.5 Receive jitter tracking compliance . . . . . . . . . . . . . . . . . . . . . . .

37、. . . . . . . . . . . . . . . . . . . . 346.6 Differential return loss and mode conversion requirements. . . . . . . . . . . . . . . . . . . . . . . . 356.6.1 Differential return loss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .356.6.2 Common to d

38、ifferential mode and differential to common mode conversion . . . . . . . 357 Backplane specification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 377.1 TxRx Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

39、. . . . . . . . . . . . . . . . . . . . 377.2 Test fixtures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 377.3 Transmitter specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

40、. . . . . . 397.4 Receiver specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 417.4.1 Receiver input return loss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 417.4.2 Receiver interferenc

41、e tolerance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 427.4.3 Receiver jitter tolerance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .437.5 Channel specification. . . . . . . . . . . . . . . . . . . . . . . . . .

42、 . . . . . . . . . . . . . . . . . . . . . . . . . . . 447.6 Support for Energy Efficient Fibre Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 457.6.1 Transmitter disable and enable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

43、7.6.2 Energy detect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45Annex A (informative)Optical cable plant usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46Annex B (in

44、formative)Structured cabling environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48B.1 Specification of operating distances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48B.2 Alternate connection loss operat

45、ing distances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48Annex C (informative)Recommended electrical channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49C.1 Insertion loss . . . . . . . . . . . . . . . . . . . . . . . . . .

46、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50iiiList of FiguresFigure 1. Reclocker location for all 32GFC PMDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Figure 2. Fibre Channel variant nomenclature . . . . . . . . . . . . . . . . . . . . . . . . .

47、 . . . . . . . . . . . . . 20Figure 3. SM transmitter eye mask for 32GFC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Figure 4. MM transmitter eye mask for 32GFC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Figure 5. Host Compliance Bo

48、ard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Figure 6. Module Compliance Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Figure 7. Host input calibration point C“ . . . . . . . . . . . . . . . .

49、 . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Figure 8. Module input calibration point B“ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Figure 9. Receiver jitter tracking template . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Figure 10. SDD11 and SDD22 for all compliance points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Figure 11. SDC11 and SCD11 for receiver input . . . . . . . . . . . . . . . . . .