API SPEC 16D-2004 Specification for Control Systems for Drilling Well Control Equipment and Control Systems for Diverter Equipment (SECOND EDITION Effective January 2005)《钻井控制设备控制系.pdf

《API SPEC 16D-2004 Specification for Control Systems for Drilling Well Control Equipment and Control Systems for Diverter Equipment (SECOND EDITION Effective January 2005)《钻井控制设备控制系.pdf》由会员分享，可在线阅读，更多相关《API SPEC 16D-2004 Specification for Control Systems for Drilling Well Control Equipment and Control Systems for Diverter Equipment (SECOND EDITION Effective January 2005)《钻井控制设备控制系.pdf（110页珍藏版）》请在麦多课文档分享上搜索。

1、Specification for Control Systems for Drilling Well Control Equipment and Control Systems for Diverter EquipmentAPI SPECIFICATION 16DSECOND EDITION, JULY 2004EFFECTIVE DATE: JANUARY 2005REAFFIRMED, AUGUST 2013Specification for Control Systems for Drilling Well Control Equipment and Control Systems f

2、or Diverter Equipment Upstream SegmentAPI SPECIFICATION 16DSECOND EDITION, JULY 2004EFFECTIVE DATE: JANUARY 2005REAFFIRMED, AUGUST 2013SPECIAL NOTESAPI publications necessarily address problems of a general nature. With respect to particu-lar circumstances, local, state, and federal laws and regulat

3、ions should be reviewed.API is not undertaking to meet the duties of employers, manufacturers, or suppliers to warnand properly train and equip their employees, and others exposed, concerning health andsafety risks and precautions, nor undertaking their obligations under local, state, or federallaws

4、.Information concerning safety and health risks and proper precautions with respect to par-ticular materials and conditions should be obtained from the employer, the manufacturer orsupplier of that material, or the material safety data sheet.Nothing contained in any API publication is to be construe

5、d as granting any right, by impli-cation or otherwise, for the manufacture, sale, or use of any method, apparatus, or productcovered by letters patent. Neither should anything contained in the publication be construed asinsuring anyone against liability for infringement of letters patent.Generally,

6、API standards are reviewed and revised, reaffirmed, or withdrawn at least everyfive years. Sometimes a one-time extension of up to two years will be added to this reviewcycle. This publication will no longer be in effect five years after its publication date as anoperative API standard or, where an

7、extension has been granted, upon republication. Status ofthe publication can be ascertained from the API Standards department telephone (202) 682-8000. A catalog of API publications, programs and services is published annually and updatedbiannually by API, and available through Global Engineering Do

8、cuments, 15 Inverness WayEast, M/S C303B, Englewood, CO 80112-5776. This document was produced under API standardization procedures that ensure appropriatenotification and participation in the developmental process and is designated as an API stan-dard. Questions concerning the interpretation of the

9、 content of this standard or comments andquestions concerning the procedures under which this standard was developed should bedirected in writing to the Director of the Standards department, American Petroleum Institute,1220 L Street, N.W., Washington, D.C. 20005. Requests for permission to reproduc

10、e or trans-late all or any part of the material published herein should be addressed to the Director, Busi-ness Services.API standards are published to facilitate the broad availability of proven, sound engineeringand operating practices. These standards are not intended to obviate the need for appl

11、yingsound engineering judgment regarding when and where these standards should be utilized.The formulation and publication of API standards is not intended in any way to inhibit anyonefrom using any other practices.Any manufacturer marking equipment or materials in conformance with the markingrequir

12、ements of an API standard is solely responsible for complying with all the applicablerequirements of that standard. API does not represent, warrant, or guarantee that such prod-ucts do in fact conform to the applicable API standard.All rights reserved. No part of this work may be reproduced, stored

13、in a retrieval system, or transmitted by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission from the publisher. Contact the Publisher, API Publishing Services, 1220 L Street, N.W., Washington, D.C. 20005.Copyright 2004 American Petroleum Instit

14、uteFOREWORDThis specification is under the jurisdiction of the API Subcommittee on Standardization ofDrilling Well Control Systems. It represents a composite of industry-accepted practices andstandard specifications employed by various equipment-manufacturing companies. The goalof this specification

15、 is to assist the oil and gas industry in promoting personnel safety, publicsafety, integrity of the drilling rig and associated equipment, and preservation of the environ-ment for land and marine drilling operations. In some instances, reconciled composites ofthese practices are included in this pu

16、blication. Suggested revisions are invited and should besubmitted to the API, Standards Department, 1220 L Street, NW, Washington, DC 20005, orby e-mail to standardsapi.org.API publications may be used by anyone desiring to do so. Every effort has been made bythe Institute to assure the accuracy and

17、 reliability of the data contained in them; however, theInstitute makes no representation, warranty, or guarantee in connection with this publicationand hereby expressly disclaims any liability or responsibility for loss or damage resultingfrom its use or for the violation of any federal, state, or

18、municipal regulation with which thispublication may conflict.This standard shall become effective on the date printed on the cover but may be used vol-untarily from the date of distribution.iiiCONTENTSPage1 SCOPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

19、 . . . . . . . . . . . . . . . . . . . 11.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 NORMATIVE REFERENCES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 TERMS, DEFINITIONS

20、, AND ABBREVIATED TERMS . . . . . . . . . . . . . . . . . . . . . 24 GENERAL CONTROL SYSTEM DESIGN REQUIREMENTS. . . . . . . . . . . . . . . . . 74.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74.2 Design Review . . . .

21、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74.3 Equipment Design Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155 CATEGORIES OF CONTROL SYSTEM APPLICATION. . . . . . . . . . . . . . . . . . . . 195.1 Cont

22、rol Systems for Surface Mounted BOP Stacks . . . . . . . . . . . . . . . . . . . . . . 195.2 Control Systems for Subsea BOP Stacks (Common Elements). . . . . . . . . . . . . 225.3 Discrete Hydraulic Control Systems for Subsea BOP Stacks . . . . . . . . . . . . . . 305.4 Electro-hydraulic and Multipl

23、ex (MUX) Control Systems for Subsea BOP Stacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 315.5 Diverter Control Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 345.6 Auxiliary Equipment, Control System Feature

24、s and Interfaces . . . . . . . . . . . . . 365.7 Emergency Disconnect Sequenced Systems (EDS) (Optional) . . . . . . . . . . . . . 375.8 Backup Control Systems (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 375.9 Special Deepwater/Harsh Environment Features (Optional)

25、 . . . . . . . . . . . . . . . 416 PERIODIC INSPECTION AND MAINTENANCE PROCEDURE . . . . . . . . . . . . . 417 DOCUMENTATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 427.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

26、 . . . . . . . . . . . . . . . . . . . . . . . . . . 427.2 Quality Control Records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 427.3 Manufacturing Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 427.4 Test Procedures

27、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 427.5 Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 438MANUFACTURING PROCESSES . . . . . . . . . . . . . . . . . . . . . . . .

28、 . . . . . . . . . . . . . . 448.1 Structural Steel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 448.2 Steel Groups. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 448.3 Structural Shape

29、and Plate Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 448.4 Welding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 458.5 Cathodic Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

30、 . . . . . . . . . . . . . . . 478.6 Painting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 479 COMMODITY ITEMS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 489.1 General . . . . .

31、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 489.2 Pressure Containing Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 489.3 Electrical and Electronic Equipment and Installation. . . . . . . . . . . . . . .

32、 . . . . . . 509.4 Mechanical Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 519.5 Fluids and Lubricants. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51vPage10 TESTING. . . . . . . . . . . . . . . . . .

33、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5110.1 Qualification Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5110.2 Factory Acceptance Testing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

34、. . . . . . . . . . 5311 MARKING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5311.1 Temporary Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5311.2 Permanent Marking . . . .

35、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5311.3 Traceability Marking Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5311.4 Manufacturers Identification Markings . . . . . . . . . . . . . . . . . . . . . . . . . . . .

36、. . . 5411.5 Equipment Name Plate Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5411.6 Other Markings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5412 STORING AND SHIPPING. . . . . . . . . . . . . . . . .

37、. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5412.1 Protection and Preservation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5412.2 Packing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

38、 5412.3 Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5412.4 Installation, Operation and Maintenance Documentation . . . . . . . . . . . . . . . . . 55ANNEX A (INFORMATIVE) . . . . . . . . . . . . . . . . . . . . . . . . . . .

39、. . . . . . . . . . . . . . . 57ANNEX B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59ANNEX C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65ANNEX D API MONO

40、GRAM SYSTEMS AND MARKING REQUIREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97Tables1 Ambient Temperature Classification Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Calculation Method Overview . . . . . . . . . . . . . . . . .

41、. . . . . . . . . . . . . . . . . . . . . . . 10B-1 Control Operating and Interface Requirements Subsea BOP Stack . . . . . . . . . . . 59B-2 Subsea Stack Hydraulic Control System Control Function List . . . . . . . . . . . . . . 60B-3 Subsea Stack Hydraulic Control System Control Readback Function

42、List. . . . . . 62B-4 Subsea Diverter Hydraulic Control System Control Function List . . . . . . . . . . . . 631Specification for Control Systems for Drilling Well Control Equipment and Control Systems for Diverter Equipment1 Scope1.1 GENERALThese specifications establish design standards for system

43、s, that are used to control blowout preventers (BOPs) and associatedvalves that control well pressure during drilling operations. The design standards applicable to subsystems and components do notinclude material selection and manufacturing process details but may serve as an aid to purchasing. Alt

44、hough diverters are notconsidered well control devices, their controls are often incorporated as part of the BOP control system. Thus, control systems fordiverter equipment are included herein. Control systems for drilling well control equipment typically employ stored energy in theform of pressuriz

45、ed hydraulic fluid (power fluid) to operate (open and close) the BOP stack components. Each operation of a BOPor other well component is referred to as a control function. The control system equipment and circuitry vary generally in accor-dance with the application and environment. The specification

46、s provided herein describe the following control system categories:a.Control systems for surface mounted BOP stacks.These systems are typically simple return-to-reservoir hydraulic control systemsconsisting of a reservoir for storing hydraulic fluid, pump equipment for pressurizing the hydraulic flu

47、id, accumulator banks forstoring power fluid and manifolding, piping and control valves for transmission of control fluid to the BOP stack functions.b.Control systems for subsea BOP stacks (common elements).Remote control of a seafloor BOP stack requires specializedequipment. Some of the control sys

48、tem elements are common to virtually all subsea control systems, regardless of the meansused for function signal transmission.c. Discrete hydraulic control systems for subsea BOP stacks. In addition to the equipment required for surface-mounted BOP stacks,discrete hydraulic subsea control systems us

49、e umbilical hose bundles for transmission of hydraulic pilot signals subsea. Also usedare dual subsea control pods mounted on the LMRP (lower marine riser package), and housing pilot operated control valves fordirecting power fluid to the BOP stack functions. Spent water-based hydraulic fluid is usually vented subsea. Hose reels are usedfor storage and deployment of the umbilical hose bundles. The use of dual subsea pods and umbilicals affords backup security.d.Electro-hydraulic/multiplex control systems for subsea BOP stacks. For deepwater operations, transmission subsea of electric/optic