AIR FORCE MS5008 REV D-1996 CONE PROPELLER HUB REAR《后方螺旋桨枢纽轴帽》.pdf

《AIR FORCE MS5008 REV D-1996 CONE PROPELLER HUB REAR《后方螺旋桨枢纽轴帽》.pdf》由会员分享，可在线阅读，更多相关《AIR FORCE MS5008 REV D-1996 CONE PROPELLER HUB REAR《后方螺旋桨枢纽轴帽》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、 MS5008 REV D W 9999732 0088576 665 -1 MSSOOSD 5 February 1996 SUPERSEDING MS5008C 29 April 1981 DETAIL SPECIFICATION SHEET CONE, PROPELLER HUB, REAR This specification is approved for use by all Departments and Agencies of the Department of Defense. Y SURFACE AND BEARING AREA SHALL BE CHECKED SIMUL

2、TANEOUSLY WITH CONE MOUNTED ON A DIAMETER. RUNOUT ON EITHER SURFACE SHALL NOT EXCEED 0.002 TIR DESIGN BEARING AREA I 0.094 fo.015 (a) -5OA.51.andblASHAFTSIZESUSE 50CONE. 1 of2 AMSC N/A FSC 1610 DISTRIBUTION STATEMEN T A. Approved for public release; distribution unlimited. Provided by IHSNot for Res

3、aleNo reproduction or networking permitted without license from IHS-,-,-MS5008 REV D 949991i2 0088577 5TL MS5008D MATERIAL: UNS C95500 ROUGHNESS HEIGHT RATING 63 UNLESS OTHERWISE SPECIFIED, IN ACCORDANCE WITH ANSI B46.1 1978. HARDNESS: ROCKWELL B-93 MIN. BREAK SHARP EDGES 0.020. DIMENSIONS IN INCHES

4、. UNLESS OTHERWISE SPECIFIED, TOLERANCES: DECIMALS fl.010. MAX TAPER ON “A” DIMENSION NOT TO EXCEED 0.0005 PER INCH OF LENGTH. THE BEARING CONTACTS ON THE TAPER CONE SEAT SHALL BE EVENLY DISTRIBUTED AND SHALL COVER NOT LESS THAN 75 PERCENT OF THE DESIGNED BEARING AREA WHEN CHECKED TO AN APPROVED GAG

5、E PRIOR TO SPLITTING CONE. CONE TO BE DIMENSIONALLY INSPECTED BEFORE SPLITTING. IDENTIFICATION MARKING TO BE IN ACCORDANCE WITH MIL-STD-130. ITEM PARTS COVERED BY THIS STANDARD ARE FUNCTIONALLY AND PHYSICALLY INTERCHANGEABLE WITH THOSE PARTS HAVING IDENTICAL DASH NUMBERS OF SUPERSEDED STANDARD AN500

6、8. FOR DESIGN FEATURE PURPOSES. THIS STANDARD TAKES PRECEDENCE OVER PROCUREMENT DOCUMENTS REFERENCED HEREIN. REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATIONS FOR BID. METALS AND ALLOYS IN THE UNIFIED NUMBERING SYSTEM (UNS), APPLICATION FOR COPIES SHOULD BE ADDRESSED TO “E

7、SOCIETY OF AUTOMOTIVE ENGINEERS, INC., 400 COMMONWEALTH DRIVE, WARRENDALE, PA 15096. Custodians: Army - AV Navy - AS AU- Force - 99 DLA - CS Preparing activity: AU- Force - 84 Agent: Air Force - 99 Project 1610-0023 2 of2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-