AIR FORCE AN129179 THRU AN129232 REV 3-1986 STUD - STRAIGHT DRILLED.5625-12 X.5625-18《0.5625-12 X0.5625-18.钻孔螺柱-直》.pdf

《AIR FORCE AN129179 THRU AN129232 REV 3-1986 STUD - STRAIGHT DRILLED.5625-12 X.5625-18《0.5625-12 X0.5625-18.钻孔螺柱-直》.pdf》由会员分享，可在线阅读，更多相关《AIR FORCE AN129179 THRU AN129232 REV 3-1986 STUD - STRAIGHT DRILLED.5625-12 X.5625-18《0.5625-12 X0.5625-18.钻孔螺柱-直》.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、AN127177 THRU AN127232 REV 3 53 = 7777715 0000352 Y a dD. SUP CLASS 5307 (fi) MAX FULL OR IMPERFECT THD- A+2 THD MPERFEOT THD= IN FULL THD CHAMFER .078x45 HAMPER .06245O APPROX SECTION THRU THREAD PROFILE BOTH THD SIZES URDERSIZE AND OVERSIZE IDENTIFICATION STAMP PER AM32800 .O10 MAX DEPTH MIL-3-774

2、2 WITHIN .o05 UNDERSIZE AND OVERSIZE DENTIFICATION D BE DAF Lu L - .125 .43a RE PLATINQ R PLATING THRI - A 1.125 1.400 INAC L B .8i .81 - - .o03 -557 -.562 .5104- ,5114 .5109-.5124 .5034-.5054 PART NUMBER AN129191 AN129197 STANDARD -557 -a562 .5134-.5144 .5139-.5154 .5064-.5084 PART NTJMBER AN129192

3、 AN129198 +. 003 +. 006 -557 -.562 .5194-.5204 .5199-.5214 T3 LINEAR DIMENSIONS i.010. DO NOT USE UNASSIGNED PART NUMBERS. THIS STANDARD WAS DEVELOPED COOPERATIVELY WITH THE ENGINE AND PROPELLER UTILITY PARTSCOMMITTEE OF THE SAE 9INSPECTION: ALL PARTS SHALL UNDERGO MAGNETIC INSPECTION IN ACCORDANCE

4、WITH AMS2640. PA AIR FORCE-NAVY AERONAUTICAL STANDARD AN129179 CUCT AV, AS THRU I 11 I STUD - STRAIGHT, DRILLED, ,5625-12 x .5625-18 AN I29232 , I I Project No. 5307-0359 (THIS DOCUMENT CONTAINS I PAGES. ) / *U.S. GOVERNMENT PRINTING OFFICE 1986 - 605-036/43907 i. : -. - - Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-