AECMA S2000M-2005 International Specification for Materiel Management -Integrated data processing for military equipment Version 4.0 See Global Engineering Documents (1-800-854-717.pdf

《AECMA S2000M-2005 International Specification for Materiel Management -Integrated data processing for military equipment Version 4.0 See Global Engineering Documents (1-800-854-717.pdf》由会员分享，可在线阅读，更多相关《AECMA S2000M-2005 International Specification for Materiel Management -Integrated data processing for military equipment Version 4.0 See Global Engineering Documents (1-800-854-717.pdf（2146页珍藏版）》请在麦多课文档分享上搜索。

1、INTERNATIONAL SPECIFICATIONFORMATERIEL MANAGEMENTINTEGRATED DATA PROCESSINGFORMILITARY EQUIPMENTISSUE 4.0, 2005-01-31VOLUME 1ASD INCORPORATES AECMA, EDIG AND EUROSPACE. GULLEDELLE 94-B.5, B-1200 BRUSSELS, BELGIUMTELEPHONE: +32 2 775 81-10, FAX: +32 2 775 81-11E-MAIL: INFOASD-EUROPE.ORG WWW.ASD-EUROP

2、E.ORGCopyright ASD-STAN Provided by IHS under license with AECMA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-Copyright ASD-STAN Provided by IHS under license with AECMA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-SPECIFICA

3、TION 2000MIssue 4.0 January 2005COPYRIGHTCopyright 1988 by each of the organisations listed below.All rights reserved. No part of this document may be reproduced or transmitted in any formor by any means, electronic or mechanical, including photocopying and recording, or byany information storage or

4、 retrieval system, nor re-sold or hired out, except as may beexpressly permitted by the Copyright Act or in writing by the Publisher.AeroSpace and Defence Industries Association of Europe(Formerly: Association Europenne des Constructeurs deMatriel Arospatial - AECMA)ASDAgrupacin Tcnica Espaola de Co

5、nstructores de MaterialAeroespacialATECMA-SpainAssociazione Industrie per LAerospazio i Sistemi e laDifesaAIAD-ItalyBundesverband der Deutschen Luft- undRaumfahrtindustrie e.V.BDLI-GermanyGroupement des Industries Franaises Aronautiques etSpatialesGIFAS-FranceNetherlands Aerospace Industries NAI-Net

6、herlandsSwedish Aerospace Industries SAI-SwedenSociety of British Aerospace Companies Ltd. SBAC-United KingdomMinistero della Difesa ItalyEjrcito del Aire SpainMinistre de la Dfense FranceDer Bundesminister der Verteidigung GermanyMinistry of Defence United KingdomAll correspondence and queries shou

7、ld be directed to theSpec 2000M AdministratorMr. Jos M. GodinhoNAMSAL-8302 CAPELLENLuxembourgTelephone: (352) 3063 6707Fax: (352) 3063 4704Email: spec2000mnamsa.nato.intCopyright ASD-STAN Provided by IHS under license with AECMA Not for ResaleNo reproduction or networking permitted without license f

8、rom IHS-,-,-Copyright ASD-STAN Provided by IHS under license with AECMA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-SPECIFICATION 2000MIssue 4.0 (LOEP) Page 1January 2005LIST OF EFFECTIVE PAGESThis list shows the effective pages in this document together with t

9、heir date of issue.When a page in the document is changed, or a page added, this will be shown as follows:1. The date on the page will reflect the date of issue of the amended page.2. The List of Effective Pages will be changed to show the latest issue date for each page.Chap/Section Page Date Chap/

10、Section Page DateVOLUME 1Title Page - January 2005Copyright - January 2005List of Effective Pgs1-2 January 2005Record of 1-2 January 2005AmendmentsTable of 1-2 January 2005Contents (0-0)0-1 1-12 January 20050-1A 13-24 January 20050-1B 25-28 January 20050-1C 29-34 January 2005Chapter 1A1A-0 1-2 Janua

11、ry 20051A-1 1-10 January 20051A-2 1-12 January 20051A-3 1-24 January 20051A-3A 25-32 January 20051A-3B 33-36 January 20051A-4 1-6 January 20051A-4A 7-12 January 20051A-4B 13-20 January 20051A-5 1-2 January 20051A-6 1-12 January 20051A-6A 13-20 January 20051A-7 1-6 January 20051A-7A 7-82 January 2005

12、1A-7B 83-92 January 20051A-7C 93-100 January 20051A-7D 101-108 January 20051A-7E 109-116 January 20051A-7F 117-124 January 20051A-7G 125-130 January 20051A-7H 131-138 January 20051A-7I 139-146 January 20051A-7J 147-154 January 20051A-8 1-6 January 20051A-8A 7-8 January 20051A-8B 9-12 January 20051A-

13、8C 13-18 January 2005Chapter 1B1B-0 1-2 January 20051B-1 1-6 January 20051B-1A 7-16 January 2005VOLUME 2Title Page - January 2005Table of 1 January 2005Contents (0-0) 2 January 2005Chapter 22-0 1-2 January 20052-1 1-6 January 20052-2 1-4 January 20052-3 1-4 January 20052-4 1-4 January 20052-5 1-6 Ja

14、nuary 20052-6 1-38 January 20052-7 1-26 January 2005Chapter 33-0 1-2 January 20053-1 1-6 January 20053-2 1-8 January 20053-3 1-10 January 20053-4 1-8 January 20053-5 1-4 January 20053-6 1-12 January 20053-7 1-86 January 20053-8 1-80 January 20053-9 1-38 January 2005Copyright ASD-STAN Provided by IHS

15、 under license with AECMA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-SPECIFICATION 2000MPage 2 (LOEP) Issue 4.0January 2005Chap/Section Page Date Chap/Section Page DateChapter 44-0 1-2 January 20054-1 1-6 January 20054-2 1-4 January 20054-3 1-6 January 20054-4

16、 1-30 January 20054-5 1-36 January 2005Chapter 55-0 1-2 January 20055-1 1-8 January 20055-2 1-8 January 20055-3 1-10 January 20055-4 1-4 January 20055-5 1-4 January 20055-6 1-6 January 20055-7 1-4 January 20055-8 1-6 January 20055-9 1-88 January 20055-10 1-94 January 2005VOLUME 3Title Page - January

17、 2005Table of 1 January 2005Contents (0-0) 2 January 2005Chapter 66-0 1-2 January 20056-0A 1-6 January 20056-1 1-6 January 20056-2 1-38 January 20056-3 1-58 January 20056-4 1-36 January 2005VOLUME 4Title Page - January 2005Table of 1 January 2005Contents (0-0) 2 January 2005Appendix 1A1-0 1-2 Januar

18、y 2005A1-1 1-8 January 2005A1-2 1-2 January 2005A1-2-1 1-20 January 2005A1-2-2 1-20 January 2005A1-2-3 1-20 January 2005A1-3 1-2 January 2005Data Element see A1-2-1Definition SheetsVOLUME 5Title Page - January 2005Table of 1 January 2005Contents (0-0) 2 January 2005Appendix 2A2-0 1-2 January 2005A2-

19、1 1-6 January 2005A2-2 1-10 January 2005A2-3 1-20 January 2005A2-4 1-12 January 2005A2-5 1-6 January 2005A2-A 1-4 January 2005A2-B 1-4 January 2005A2-C 1-8 January 2005A2-D 1 January 2005A2-E 1-10 January 2005A2-F 1-14 January 2005A2-G 1-26 January 2005Appendix 3A3-0 1-2 January 2005A3-1 1-6 January

20、 2005A3-2 1-4 January 2005Appendix 4A4-0 1-2 January 2005A4-1 1-4 January 2005A4-2 1-6 January 2005Appendix 5A5-0 1-4 January 2005Copyright ASD-STAN Provided by IHS under license with AECMA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-SPECIFICATION 2000MIssue 4.

21、0 Page 1January 2005RECORD OF AMENDMENTSIssue 4.0 of Specification 2000M, issued in January 2005 incorporates the October 1998issue of the Specification (Issue 3.0) and additional changes. Further amendments willbe identified by individual Change Request Numbers.AmendmentNumberDateIssuedDateInserted

22、InsertedByIssueNumberChange RequestNumberCopyright ASD-STAN Provided by IHS under license with AECMA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-SPECIFICATION 2000MPage 2 Issue 4.0January 2005For the record, the following are the changes incorporated to Issue 3

23、.0 (Change Pack 1)during the last editorial revision.Specification 2000M - Change 2 to Issue 3.0Request No. Description of Change Request- 03/IP/01-2 Total Quantity per Location- 01/IP/02-1 Reference Designator- 02/IP/02-1 Electrostatic Sensitive Device- 03/IP/02-3 Industry Observations- 05/IP/02-3

24、Reinstatement Message- 01/IP/03-1 Serialised Item Marker- 02/IP/03-1 Change Authority Number- 03/IP/03-1 Land one for each of the disciplinescovered by the Specification:- Initial Provisioning Expert Team (IPET).- Order Administration Expert Team (OAET).- Information Technology Expert Team (ITET).Ea

25、ch ET comprises one military and one industry voting representative from eachnation. Additional members are co-opted from specialist areas when necessary. TheETs have military and industry co-chairs who are also non-voting representatives onthe MCG.The parts of S2000M for which each ET is responsibl

26、e are as follows:- IPET. Chapters 1A and 1B, and Sections 6-0 and 6-1; the associated Data Elementsthat appear in the Data Dictionary, Appendix 1, and the terms defined in Appendix 4;and the overall management of Appendix 4.- OAET. Chapters 2, 3, 4 and 5, and Sections 6-2, 6-3, and 6-4; Appendix 3;

27、and theassociated Data Elements that appear in the Data Dictionary, Appendix 1, and theterms defined in Appendix 4.- ITET. Appendix 2; the associated Data Elements that appear in the Data Dictionary,Appendix 1, and the terms defined in Appendix 4; the overall management ofAppendix 1; and the overall

28、 IT management of S2000M.Copyright ASD-STAN Provided by IHS under license with AECMA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-SPECIFICATION 2000MIssue 4.0 (0-1) Page 9January 2005Requests for Clarification of the SpecificationA user of S2000M may have a requ

29、irement to have certain parts of S2000M clarified,which could relate to either Business process or Technical aspects. In this situation, itis likely that the raising of a Change Proposal would be inappropriate because it isnecessary only to provide an explanation of how S2000M should be interpreted.

30、However, because the request and the answer may be of interest to other users ofS2000M, a formal procedure is used to register and distribute this information. Incertain circumstances, it may be felt that the Request for Clarification (RFC) hashighlighted an area of S2000M which should be improved a

31、nd, in these cases, aChange Proposal will be raised by the Expert Team to introduce better wording intoS2000M.When an S2000M user has the need for an explanation of how a particular part ofS2000M should be interpreted, the request should be recorded on the S2000MRequest for Clarification Form, inclu

32、ded in Annex B to this Section. This form should beforwarded to a member of the Expert Team, appropriate to deal with the request, ifknown. Otherwise, the form should be sent to the national MCG representative or oneof the MCG Co-Chairs who will pass it to the appropriate Expert Team.On receipt of t

33、he request, the Expert Team Member will obtain a Serial Number fromhis Expert Team Co-Chair, who is responsible for holding the register. The request maybe answered by the member in conjunction with his Expert Team Co-Chair, or inconsultation with the full Expert Team. In addition, some cases may re

34、quire theinvolvement of other Expert Teams. Once the answer to the request is established itwill be recorded on the Form and forwarded to the S2000M user who originated therequest.In addition to providing the answer to the originator of the request, the completed RFCForms will also be circulated to

35、the Expert Team members, the Co-Chairs of the otherExpert Teams and the MCG Members. The MCG will consider further action on thesepoints of clarification, which may involve the raising of Change Proposals.Where it is felt that the RFC provides a clarification that would benefit other S2000Musers, th

36、e request, together with the answer will be published on the internet web siteat http:/www.namsa.nato.int/s2000m/s2000m_rfc_e.htm. Before users raise anRFC, they are encouraged to first check the posted RFCs to see if the issue has beenpreviously addressed.Requests for Changes to the SpecificationAs

37、 already stated, because of the constitutional requirement to obtain the agreement ofboth military and industry participants in all nations involved, requests for changesshould generally be limited to those that are either urgent or essential to thesatisfactory working of the Specification, or which

38、 can improve it by affording significantcost benefits. Requests for less important changes or editorial corrections may besubmitted but these will be batched and processed during a scheduled revision orwhen they can be readily incorporated alongside more urgent changes.Copyright ASD-STAN Provided by

39、 IHS under license with AECMA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-SPECIFICATION 2000MPage 10 (0-1) Issue 4.0January 2005An initial request for amendment to the Specification is referred to as a ChangeProposal. When the Change Proposal has been accepted

40、by the appropriate ET Co-Chairs for staffing within the Expert Teams, it is allocated a Change Request Number.It then becomes a Change Request for submission to the MCG for ratification oncethe ET staffing process has been completed.Change proposals should be submitted to the appropriate national ET

41、 member.Submissions should be drawn up using Change Proposal/Request Form (1) included inAnnex C to this Section. Ideally, the relevant page(s) of the Specification should becopied and the proposed amendment included in manuscript.On receipt of the Change Proposal, the ET member will assess its vali

42、dity and viability.If the proposal is not supported, the ET member will return it to the originator with asuitable explanation. If supported, the ET member will then obtain a Change RequestNumber from the ET Co-Chair and circulate the Change Request to all ET members forcomment. The ET Co-Chair will

43、 raise and maintain Change Request Form (2) in orderto monitor progress of the Change Request. If the proposed change is complex, the ETCo-Chairs may decide to call a meeting of the ET. Otherwise, the Change Request willbe dealt with expeditiously by correspondence.When the Change Request has been a

44、pproved by the ET members, it will be submittedto the MCG members and the Co-Chairs of the other ETs for consideration at the nextMCG meeting. If the Change Request is too urgent to wait until the next MCG meeting,ratification ex-committee may be requested or, if it is complex and requires discussio

45、n,an extraordinary meeting of the MCG may be called.Because of the overlapping business relationships of S2000M and S1000D, aMemorandum of Understanding exists between the MCG and the TechnicalPublications Specification Maintenance Group (TPSMG) for S1000D. The purpose ofthis MOU is to recognise the

46、 overlapping interests of the two Management Groups andprovide a basis for the exchange of information and the facilitation of the mutualharmonisation of common processes, data elements and philosophies in the LogisticsSupport business. As part of the change control process, S2000M Change Requestswi

47、ll be provided to the TPSMG to allow for the assessment of impact on areas ofcommonality and the opportunity for comments, before formal publication.The Change as agreed by the MCG will be circulated through the MCG membership.Changes not ratified by the MCG will be returned to the originator, with

48、a suitableexplanation, via the ET Co-Chairs. Following MCG ratification the Change will besubmitted to the printer for publication as a formal amendment to the Specification.Copyright ASD-STAN Provided by IHS under license with AECMA Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-SPECIFICATION 2000MIssue 4.0 (0-1) Page 11January 20056. COPIES OF THE SPECIFICATIONCopies of S2000M and amendments can be obtained from:InfoVision Systems Ltd3 Pride Place, Pride ParkDerbyDE24 8QRUKTel: 01332 347123 - Fax: 01332 3451107. SOFTWARE PRODUCT