AECMA PREN 8.6013-2001 Aerospace Series Qualification Procedure for Aerospace Products Edition P1《航空航天系列 航空航天产品 合格鉴定程序》.pdf

《AECMA PREN 8.6013-2001 Aerospace Series Qualification Procedure for Aerospace Products Edition P1《航空航天系列 航空航天产品 合格鉴定程序》.pdf》由会员分享，可在线阅读，更多相关《AECMA PREN 8.6013-2001 Aerospace Series Qualification Procedure for Aerospace Products Edition P1《航空航天系列 航空航天产品 合格鉴定程序》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、Draft for Public Comment Kv;, I. “:Fdki all comments will be given consideration prior to publication. See overleaf for information on commenting. No copying is allowed, in any form, without prior written permission from BSI except as permitted under the Copyright, Designs and Patent Act 1988 or for

2、 circulation within a nominating organization for briefing purposes, Electronic circulation is limited to dissemination by e-mail within such an organization by committee members. Further copies of this draft may be purchased from BSI Customer Services, at the Head Office address above, telephone 02

3、0 8996 9001, fax 020 8996 7001, e-mail grdersbsi.ora.uk. NOTE British, international and foreign standards are also available from Customer Services. Information on the co-operating organizations represented on the committees referenced above may be obtained from the responsible committee secretary.

4、 Cross-references The British Standards which implement international or European publications referred to in this draft may be found by referring to the British Standards Online Service on the BSI website under the International Relationship information. This information is also available within th

5、e BSI catalogue (paper version) and the BSI Standards Electronic Catalogue (CD). The Online Service can also be used to find information on draft standards related to international or European publications. Responsible BSI committee Secretary: PAUL RYDON E-mail address: paul.rydonQ bsi- i No. 20, 14

6、/05/01 Direct tel: 020 8996 7266 Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Version 4 4 March 2000 Commenting on drafts Introduction This draft st

7、andard is based on European discussions in which the UK took an active part. Your comments on this draft are welcome and will assist in the preparation of the consequent British Standard. If no comments are received to the contrary, then the UK will approve this draft and implement it as a British S

8、tandard. Comment is particularly welcome on national legislative or similar deviations that may be necessary. Even if this draft standard is not approved by the UK, if it receives the necessary support in Europe, the UK will be obliged to publish the official English Language text unchanged as a Bri

9、tish Standard and to withdraw any conflicting standard. UK vote Please indicate whether you consider the UK should submit a negative (with reasons) or positive vote on this draft. Format The guidance given below is intended to ensure that all comments receive efficient and appropriate attention by t

10、he responsible BSI committee. Annotated drafts are not acceptable and will be rejected. Each comment shall make one point only, be clearly separated from the others and be structured as follows in clause order: e clause/sub-clause; paragraphhablebigure number; type of comment (general, technical or

11、editorial); comment (with rationale); proposed change. Submission Insert here name, address and contact details of delegated secretariat: preferably electronically via e- mail or on diskette (MS-DOS compatible, 1.44 megabytes). Comments should be compatible with Version 6.0 or Version 97 of Microsof

12、NB Word for WindowsTM, if possible; otherwise comments in ASCII text format are acceptable. Any comments not submitted electronically should still adhere to the formaf requirements given above. No acknowledgement will normally be sent. Microsoft and MS-DOS are registered trademarks, and Windows is a

13、 trademark of Microsoft Corporation. Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Q, Q, c .- E E 8 - O c Q) Q) c - o“ U C N Copyright Association Eu

14、ropeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for Resal

15、eNo reproduction or networking permitted without license from IHS-,-,-prEN not yet allocated Edition: 1 Study no: 8.6013 Draft no: Date: May 2001 Step no: Ref.: 8.6013.006 ENGLISH VERSION Aerospace series Qualification Procedure for Aerospace Products Srie arospatiale Luft- und Raumfahrt Warning Thi

16、s document is NOT an AECMA Standard. It is distributed for review and comment. It is subject to change without notice and may NOT be referred to as an AECMA Standard. Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they are

17、aware and to provide supporting documentation. Author: Dr Shrader, EADS Airbus Germany E-mail: THE EUROPEAN ASSOCIATION OF AEROSPACE INDUSTRIES - STANDARDIZATION Gulledelle 96, B - 1200 Bruxelles Tel. : (32) 2 775 81 10 Fax.: (32) 2 775 81 11 Copyright Association Europeene des Constructeurs de Mate

18、riel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking pe

19、rmitted without license from IHS-,-,-Page 3 prEN -: 2001 1. Scope This document provides a basic uniform method for ensuring products conform with the requirements of technical specifications referring to qualified parts and for a manufacturer of such parts to have a qualified management system at l

20、east equivalent to EN 91 OO. 2. Normative References This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subs

21、equent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 9100 Quality systems - Model for quality a

22、ssurance in design, development, production, installation and servicing ) EN 9103 Variation Management of Key characteristics *) 3. Terms, definitions and abbreviations mandated body Organisation or person tasked with assessing whether the manufacturers products comply with the relevant standards an

23、d whether the manufacturers quality system complies with AS EN 91 OO. product Part, process, or material. product qualification certificate A Serialised Document that certifies that a product has been qualified according to the relevant standards. relevant authority An authority that runs a qualifie

24、d products system, issues product qualification certificates and maintains a list of qualified products and their manufacturers (A list of such Authorities for this document is shown in Annex A). user An organisation purchasing specific aerospace qualified products. manufacturer Company or organisat

25、ion manufacturing the products to be qualified and having a quality management system meeting the requirements of EN 91 OO. 1) Published as AECMA Prestandard at the date of publication of this standard 2) In preparation at the date of publication of this standard Copyright Association Europeene des

26、Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Page 4 prEN -: 2001 4. Application Process A manufacturer seeking to have a product qualified shall apply to the relevant authority specify

27、ing: P the description of the product to be qualified, identifying their applicable specifications and identify the relevant qualification standard to be used. P an overview of the company (organisation, products manufactured, Manpower, facilities, etc.). k a list of approvals and/or qualifications

28、already granted and, if any, information on results of evaluations already performed. This shall be accompanied by a certificate showing compliance to EN 9100 carried out by a body acceptable to the relevant authorities plus any other required certifications/accreditations from relevant organisation

29、s. After examination of the above information the relevant authorities shall forward it to the mandated body. 5. Qualification Procedure The mandated body shall: 8 8 8 8 8 8 8 8 8 request the manufacturer to implement a Qualification Test Programme and to specify the place and facilities proposed to

30、 achieve this programme evaluate the Qualification Test Programme (QTP) establish a schedule for completion of the QTP ensure that the QTP is correctly achieved ensure that a report documenting the results of the QTP is prepared have access during all stages of the production and test program of rel

31、evant manufacturing data and inspection data for the product ensure all tools and test equipment used in the qualification are in calibration and being used correctly ensure the product to be evaluated has been manufactured and inspected as applicable to production parts reserve the right to proceed

32、 to verification test and have counter test performed when it is deemed necessary ensure that the significant manufacturing operations and parameters are identified, that these operations and parameters are recorded, design and manufacturing drawings are recorded and all signed by representatives of

33、 both the mandated body and the manufacturer (signed and sealed). The manufacturer shall certify not to change anything without the express written approval of the Appropriate Authorities. For all significant manufacturing operations and parameters that are identified, ensure that EN 91 03 (Variatio

34、n Management of Key Characteristics) is applied as appropriate for purpose of establishing a predictably consistent supply of conforming product. After examination of the test results the mandated body shall write a qualification test report (QTR) and forward a copy to the relevant authority and the

35、 manufacturer. This report shall contain at least the following: Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Page 5 prEN -: 2001 . . a list of all

36、the tests carried out in accordance with the QTP reference number of the agreed and frozen manufacturing and inspection file a recommendation of the acceptance or otherwise of the qualification any required corrective action and its compliance a full list of quantitative test results and summary she

37、et giving the results of tests as pass/fail 6. Certification Procedure After consideration of the test report, the relevant authority shall decide (after taking into account the recommendations from the mandated body) whether or not to grant the manufacturer a product qualification certificate for t

38、he product concerned. The certificate shall contain the following minimum information: 0 name of the manufacturer of the product 0 where the product was manufactured part number of the Product Qualified and reference number of technical specification the part was qualified to 0 the Qualification Tes

39、t Report number o a serial number, issue and granting date of the certificate a validity period (of e. g. 3 years) o reference to the approved quality management system. 7. Maintenance In due time before the end of the validity period the relevant authority shall have a mandated body perform an audi

40、t on the manufacturer to verify that the manufacturing process is still valid and then make a recommendation to the relevant authority whether or not the qualification can be continued. A user may conduct or have conducted on his behalf, complimentary evaluations which he judges are necessary. In ca

41、se of dispute, appeal can be made to the relevant authority appeal committee. The manufacturer shall inform the relevant authority when . any change is made in his quality system that might affect the granted approval any evolutions occur in the company situation (merger, take-over, winding up, chan

42、ge of name, change of premises, etc.) . modifications are proposed in manufacturing (significant operations and/or parameters, place change of manufacture, change of sub suppliers, etc.) The relevant Authority will examine each case and give a considered verdict. This may include a request to the ma

43、ndated body for additional assessment. Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Page 6 prEN -: 2001 Any information given to the relevant Author

44、ity shall be treated with the confidentiality requirements of its organisation. Users of qualified aerospace products shall report to the relevant Authority any failure or problems relative to the qualified aerospace products of the authorities given in Annex A. In the case of complaint from the use

45、rs to the relevant Authority on the performance of a qualified aerospace product provided with a qualification certificate, the relevant Authority may request a mandated body to perform an audit at the place of manufacture. After consideration of the audit report the relevant Authority shall notify the manufacturer of the decision taken. Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-