AECMA PREN 6047-004-1995 Aerospace Series Connectors Electrical Circular Coupled by Threaded Ring for High Current Operating Temperature + 200 Degrees Celsius Continuous and Fire Rn.pdf

《AECMA PREN 6047-004-1995 Aerospace Series Connectors Electrical Circular Coupled by Threaded Ring for High Current Operating Temperature + 200 Degrees Celsius Continuous and Fire Rn.pdf》由会员分享，可在线阅读，更多相关《AECMA PREN 6047-004-1995 Aerospace Series Connectors Electrical Circular Coupled by Threaded Ring for High Current Operating Temperature + 200 Degrees Celsius Continuous and Fire Rn.pdf（6页珍藏版）》请在麦多课文档分享上搜索。

1、 AECMA PREN*b047- 004 95 I 30L23Ll 0009923 303 AECMA STANDARD NORME AECMA AECMA NORM prEN 6047-004 Edition P1 October 1995 PUBLISHED BY THE EUROPEAN ASSOCIATION OF AEROSPACE INDUSTRIES (AECMA) Gulledelle 94 - B-1200 BRUXELLES - Tel. (32) 2 775 81 10 - Fax. (32) 2 775 81 11 ICs : Descriptors : ENGLIS

2、H VERSION Aerospace series Connectors, electrical, circular, coupled by threaded ring, for high current operating temperature + 200 OC continuous, and fire resistant Part 004 - Plug Product standard Srie arospatiale Connecteurs lectriques circulaires, accouplement par bague filete, pour hautes inten

3、sits temprature dutilisation + 200 OC continu, et tenant au feu Partie 004 - Fiche Norme de produit Luft- und Raumfahrt Elektrische Rundsteckverbinder mit Schraubkupplung, fr hohe Strme Betriebstemperaturen + 200 OC konstant, und feuerbestndig Teil 004 - Freier Steckverbinder Produktnorm This “Aeros

4、pace Series“ Prestandard has been drawn up under the responsibility of AECMA (The European Association of Aerospace Industries). It is published on green paper for the needs of AECMA-Members. It has been technically approved by the experts of the concerned Technical Committee following comment by th

5、e Member countries. Subsequent to the publication of this Prestandard, the technical content shall not be changed to an extent that interchangeability is affected, physically or functionally, without re-identification of the standard. After examination and signature of the AECMA Standard Checking Ce

6、ntre INPSI and formal agreement of the Official Services of the Member countries it will be submitted as a draft European Standard to CEN (European Committee for Standardization) for formal vote. Nota - Extra copies can be supplied by B.N.A.E. - Technopolis 54 - 199, rue Jean-Jacques Rousseau - 921

7、38 ICSY-LEC-MOULINEAUX CEDEX I Comments should be sent within six months after the date of publication to I Edition approved for publication 1995-10-31 AECMA Gulledelle 94 B-1200 BRUXELLES AIB/TF3 Chairman Mr Luck aecma 1995 Copyright Association Europeene des Constructeurs de Materiel Aerospatial P

8、rovided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,- AECMA PRENxb047- 004 95 111 1012311 0009922 24T 111 Page 2 prEN 6047-004 : 1995 Contents list 1 Scope 2 Normative references 3 Terminology 4 Required characteristics 5 Designati

9、on 6 Marking 7 Technical specification Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AECflA PRENxb047- 004 95 I LOL23LL 0009923 L8b I Page 3 prEN 604

10、7-004 : 1995 1 Scope This standard defines plugs in the family of circular electrical connectors coupled by threaded ring, for high current, operating temperature +200 “C continuous, and fire resistant. For associated contacts, see EN 6047-002. For receptacles, see EN 6047-003. 2 Normative reference

11、s EN 6047-001 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, for high current, operating temperature +200 “C continuous, and fire resistant - Part-O01 - Technical specification ) EN 6047-002 Aerospace series - Connectors, electrical, circular, coupled by threaded ring

12、, for high current, operating temperature +200 “C continuous, and fire resistant - Part 002 - Specification of performance and contact arrangements ) Aerospace series - Connectors, electrical, circular, coupled by threaded ring, for high current, operating temperature +200 “C continuous, and fire re

13、sistant - Part 003 - Square flange receptacle - Product standard ) Contacts, electrical, male 052, type A, crimp, class S - Product standard 2, Contacts, electrical, female 053, type A, crimp, class S - Product standard EN 6047-003 EN 3155-052 : Aerospace series - Electrical contacts used in element

14、s of connection - Part 052 - EN 3155-053 : Aerospace series - Electrical contacts used in elements of connection - Part 053 - 3 Terminology See EN 6047-001 1) Published as AECMA Prestandard at the date of publication of this standard. 2) In preparation at the date of publication of this standard. Co

15、pyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AECMA PREN*b047- O04 95 I 1012311 0009924 O12 Page 4 prEN 6047-004 : 1995 4 Required characteristics 4.1

16、Dimensions, mass The dimensions of plugs are given in figure 1. Dimensions and tolerances are in millimeters. Mass : 1 300 g max. (without contacts). 0 132 3 holes for lockwire 0 1 27 111.13 max. . F 0 88.9 max. B F Lock display Unmated Mated Figure 1 Copyright Association Europeene des Constructeur

17、s de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AECMA PRENxb047- 004 75 P. LOL23LL 0007725 T57 Model K 4.2 Material, surface treatment See table 1. Description Sealed plug with housing (shell) in cad

18、mium plated steel - Crimp contacts - Fire resistant - Maximum operating temperature : +200 OC 4.3 Main general characteristics See EN 6047-002. 5 Designation EXAMPLE : Description block CONNECTOR, ELECTRICAL, PLUG Connector model (see table Page 5 prEN 6047-004 : 1995 Identity block TT- Number at th

19、e basic standard I ) Plug (with self locking system) (see EN 6047-002) Shell size and contact arrangement -4835 - 1 (see EN 6047-002) Type of contact (see table 2) ! ! Polarization (see EN 6047-002) Table 1 : Connector models Copyright Association Europeene des Constructeurs de Materiel Aerospatial

20、Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,- AECMA PREN*b047- 004 95 E 1012311 0009926 995 W Male contacts Page 6 prEN 6047-004 : 1995 A Table 2 : Type of contacts and delivery Female contacts I Order code B Delivered wit

21、hout contacts 6 Marking The marking shall include : - the manufacturers name or trademark ; - the manufacturers part number ; - the date of manufacture (year, week). Delivered with male contacts EN 31 55-052 or female contacts EN 3155-053 M F 7 Technical specification According to EN 6047-001. Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-