AECMA PREN 4165-008-2003 Aerospace series Connectors electrical rectangular modular Operating temperature 175 Degrees C continuous Part 008 Rack and panel plug for 2 and 4 modules .pdf

《AECMA PREN 4165-008-2003 Aerospace series Connectors electrical rectangular modular Operating temperature 175 Degrees C continuous Part 008 Rack and panel plug for 2 and 4 modules .pdf》由会员分享，可在线阅读，更多相关《AECMA PREN 4165-008-2003 Aerospace series Connectors electrical rectangular modular Operating temperature 175 Degrees C continuous Part 008 Rack and panel plug for 2 and 4 modules .pdf（6页珍藏版）》请在麦多课文档分享上搜索。

1、AECMA STANDARD NORME AECMA AECMA NORM Edition approved for publication 28 February 2003 prEN 41 65-008 Edition P 1 February 2003 Comments should be sent within six months after the date of publication to Electrical Domain AECMA-STAN ICs: 49.060 Descriptors: ENGLISH VERSION Aerospace series Connector

2、s, electrical, rectangular, modular Operating temperature 175 OC continuous Part 008: Rack and panel plug for 2 and 4 modules, series 2 Product standard Srie arospatiale Luft- und Raumfahrt modulaires in modularer Bauweise Connecteurs lectriques rectangulaires Elektrischer Rechtecksteckverbinder Tem

3、prature dutilisation 175 OC continu Betriebstemperatur 175 OC konstant Partie 008 : Fiches de rack 2 et 4 modules, Teil 008: Freier Einschub- und Gehusesteckverbinder srie 2 mit 2 und 4 Modulen, Serie 2 Norme de produit Produktnorm This “Aerospace Series“ Prestandard has been drawn up under the resp

4、onsibility of AECMA-STAN (The European Association of Aerospace Industries - Standardization). It is published on green paper for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments. Subsequent to the publica

5、tion of this Prestandard, the technical content shall not be changed to an extent that interchangeability is affected, physically or functionally, without re-identification of the standard. After examination and review by users and formal agreement of AECMA-STAN it will be submitted as a draft Europ

6、ean Standard to CEN (European Committee for Standardization) for formal vote. Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Page 2 prEN 4165-008: 200

7、3 Foreword This standard was reviewed by the Domain Technical Coordinator of AECMA-STANS Electrical Domain. After inquiries and votes carried out in accordance with the rules of AECMA-STAN defined in AECMA- STANS General Process Manual, this standard has received approval for Publication. Contents P

8、age 1 Scope 3 2 Normative references . 3 3 Terminology 3 4 Required characteristics 3 5 Rack plug . 4 6 Designation . 6 7 Marking . 6 8 Technical specification 6 Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reprodu

9、ction or networking permitted without license from IHS-,-,-Page 3 prEN 4165-008: 2003 1 Scope This standard defines the rack and panel plug for 2 and 4 modules, series 2 used in the family of rectangular electrical connectors. The receptacles corresponding to those plugs are defined in EN 41 65-002.

10、 The protective covers corresponding to those plugs are defined in EN 41 65-01 9. 2 Normative references This European Standard incorporates by dated or undated reference provisions from other publications. These normative references are cited at the appropriate places in the text and the publicatio

11、ns are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to apply. EN 2424, EN 41 65-0

12、01, EN 41 65-002, EN 41 65-003, Aerospace series - Marking of aerospace products Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature I75 “C continuous - Part 001: Technical specification - Product standard 1 ) Aerospace series - Connectors, electrical, rectangular

13、, modular - Operating temperature I75 “C continuous - Part 002: Specification of performance and contact arrangements 1) Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature I75 “C continuous - Part 003: Modules series 2 and series 3 - Product standard 1 ) EN 41 65

14、-01 9, Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 “C continuous - Part 019: Protective cover for plug, for 2 or 4 modules, series 2 and series 3 - Product standard 2) EN 41 65-021, Aerospace series - Connectors, electrical, rectangular, modular - Oper

15、ating temperature I75 “C continuous - Part 021: Coupling system keyway for plug - Product standard 1 ) 3 Term in ol ogy See EN 4165-001. 4 Required characteristics Dimensions are in millimetres. 1) Published as AECMA standard at the date of publication of this standard 2) In preparation at the date

16、of publication of this standard Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Page 4 prEN 4165-008: 2003 5 Rack plug 5.1 See Figure 1. For 2 modules

17、classes W, F, and A Figure 1 Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Page 5 prEN 4165-008: 2003 W 5.2 See Fiaure 2. For 4 modules classes W, F

18、and A Rack and panel plug with housing (shell) olive drab cadmium plated, aluminium alloy, conducting finish, 500 hours resistance to salt mist, maximum operating temperature 175 “C continuous Figure 2 Table 1 - Rack and panel plug class A I I Class I Description Rack and panel plug with housing (sh

19、ell) black anodised plated, aluminium alloy, no conducting finish, 48 hours resistance to salt mist, maximum operating temperature 175 “C continuous I Rack and panel plug with housing (shell) black nickel plated, aluminium alloy, 96 hours IFI resistance to salt mist, maximum operating temperature 17

20、5 “C continuous Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Page 6 prEN 4165-008: 2003 Type 9: Rack and panel plug (see EN 4165-002) A = series 2 6

21、 Designation EXAMPLE: Shell type 4 = plug 4 modules 2 = plug 2 modules State of delivery plug keying coupling (see EN 4165-021) Position of keying coupling O - Not fitted Fitted in the plug 4 5 6 7 Marking Unless there are other specific contractual requirements, the marking shall be in accordance with EN 2424, category P. 8 See EN 4165-001. Tech n i cal specification Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-