AECMA PREN 3951-1993 Aerospace Series Silver Base Alloy AG-B32101 Filler Metal for Brazing Rolled Foil Issue P1《航空航天系列.镍基合金AG-B32101 硬钎焊用填充金属非晶质箔》.pdf

《AECMA PREN 3951-1993 Aerospace Series Silver Base Alloy AG-B32101 Filler Metal for Brazing Rolled Foil Issue P1《航空航天系列.镍基合金AG-B32101 硬钎焊用填充金属非晶质箔》.pdf》由会员分享，可在线阅读，更多相关《AECMA PREN 3951-1993 Aerospace Series Silver Base Alloy AG-B32101 Filler Metal for Brazing Rolled Foil Issue P1《航空航天系列.镍基合金AG-B32101 硬钎焊用填充金属非晶质箔》.pdf（7页珍藏版）》请在麦多课文档分享上搜索。

1、I 1 Latest date for receipt of comments 93 3314 31 Auqust 1993 Our ref ACE/61 Technical Committee ACE/61 Date 3% no acknawledgement will normally be sent. ddress below The comments received will be passed to the committee concerned for Requests for further copies ofthis draft should be sent to: rati

2、on (Drafts), BSI, Liriforca Wood, MilLon Keynes hE14 6LE. FLU: O908 320856, Telex 825777 BSWG. o) - s2 together with an addressed label. Orders not accompanied by a remittance will be subject to a delay. TRIS IS A DRAFT AND MUST NOT BE REGARDED OR USED AS A BRITISH STANDARD Manehester office 3 York

3、Street, Manchester M2 2,4T Telephone 061-832 3731 Telex 662969 BSIfriAN G 2 Park Street, London W1A 2BS Telephone 071-629 9000 Telex 266933 BSILON G $25777 BSIMK G Sales &Accounts Fx 061-835 2895 Fax 071-629 0506 Form 36 Part I - 9201 93/709845DC Copyright Association Europeene des Constructeurs de

4、Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ITTEES TO WHOSE FT HAS ALSO BEEN SENT - A2 - 93/709845 Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under licen

5、se with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Issue PI VDC : Key words : ef$a series Silver base alloy AG-5321 O1 Filler metal for brazing Rolled foil Srie arspaial Allliage base argent AG43321 O1 Metal dappore de brasage Feu ilia rd lamin& Luft- und

6、 Raua ierasislegeng AG-5321 O1 Hartlot in Form von gewalzter Folie ENTWURF Draft 2 O1 193 Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-VMi24.05.93K6

7、 Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-prEN 3954 Page 3 O nd For the use of this standard, see EN 2500-6. cope and field of ppicajn This stan

8、dard specifies the requirements relating to silver base braze filler metal AG-B32101 in rolled foil form for aerospace application. EN 2500-6 Aerospace series instructions for the drafting and use of metallic material saandards - Part 6 : Specific requirements for braze alloys 1 EN 2600 EN 3875 Aero

9、space series - Designation of metallic semi-finished products - Rules *) Aerospace series - Braze aiioys Technical specification 9 Aeros ace series Dimensional standards for filler metais for brazing for rolled foil ar EN 4062 1) In preparation at the date of publication of this standard 2) Publishe

10、d as AECMA Prestandard ai the date of publicarion of this standard Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-18 I Method of production Limit dime

11、nsions (mm) Cold rolled and cleaned 6.1 Delivery condition and Rear treatment I As manufactured or annealed Use condition Delivery condition and heat treatment C haracteristics eat treatment Notes (see line 98) I Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by I

12、HS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-prEN 3954 Page 5 ixternal defects %ermal analysis Differential thermal inalysis) Wettabiiity (fusion test) Designation Notes Typical use See EN 3876 -i See EN 2600 -I Joining carbon, low alloy and austenitic steels. -I Copyright Association Europeene des Constructeurs de Materiel Aerospatial Provided by IHS under license with AECMANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-