ABS 2 CORR-2018 RULES FOR BUILDING AND CLASSING STEEL VESSELS 2018.pdf

《ABS 2 CORR-2018 RULES FOR BUILDING AND CLASSING STEEL VESSELS 2018.pdf》由会员分享，可在线阅读，更多相关《ABS 2 CORR-2018 RULES FOR BUILDING AND CLASSING STEEL VESSELS 2018.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、 RULES FOR BUILDING AND CLASSING STEEL VESSELS 2018 CORRIGENDA/EDITORIALS 1 March 2018 Page No. Paragraph Comments Part 3 Hull Construction and Equipment Chapter 2 Hull Structures and Arrangements Section 15 Protection of Deck Openings 247 3-2-15/Table 7 In last row, “Plastic materials on steel” to

2、read “Lower friction materials”. Part 4 Vessel Systems and Machinery Chapter 1 General Section 1 Classification of Machinery 11 4-1-1/Table 3 For Item 21, Rule Reference to read “4-8-5/5.17.11”. Part 4 Vessel Systems and Machinery Chapter 6 Piping Systems Section 2 Metallic Piping 428 4-6-2/Table 8

3、For NPS of 5 in., outside diameter in inches to read “5.563”. Part 4 Vessel Systems and Machinery Chapter 6 Piping Systems Section 5 Piping Systems for Internal Combustion Engines 499 4-6-5/13.1 Reference “6.5.3 of the ABS Guide for Propulsion Systems for LNG Carriers” to read “5C-8-A7/5.5”. Part 5C

4、 Specific Vessel Types Chapter 3 Vessels Intended to Carry Ore or Bulk Cargoes (150 meters (492 feet) or more in Length) Section 4 Initial Scantling Criteria 392 5C-3-4/9.1 In paragraph above equation for t6, “t5” to read “t6”. 393 5C-3-4/9.1 In paragraph above equation for t7, “t6” to read “t7”. AB

5、SRULES FOR BUILDING AND CLASSING STEEL VESSELS .2018 1 Corrigenda/Editorials 1 March 2018 Page No. Paragraph Comments Part 5C Specific Vessel Types Chapter 5 Vessels Intended to Carry Containers (130 meters (427 feet) to 450 meters (1476 feet) in Length) Section 4 Initial Scantling Criteria 684 5C-5

6、-4/Figure 1 Revise references in figure as follows: 5C-5-4/21.15C-5-4/21.55C-5-4/21.35C-5-4/21.75C-5-4/15.7.25C-5-4/15.75C-5-4/173-2-1/175C-5-4/15.95C-5-4/175C-5-4/175C-5-4/15.75C-5-4/175C-5-4/4.55C-5-4/19.15C-5-4/19.55C-5-4/19.13.15C-5-4/15.15C-5-4/13.55C-5-4/15.55C-5-4/15.115C-5-4/15.135C-5-4/19.9

7、5C-5-4/21.95C-5-4/11.35C-5-4/4.35C-5-4/11.15C-5-4/19.35C-5-4/19.75C-5-4/19.13.25C-5-4/135C-5-4/13.115C-5-4/19.15C-5-4/19.55C-5-4/23.35C-5-4/9.75C-5-4/9.55C-5-4/9.215C-5-4/9.235C-5-4/9.3.15C-5-4/9.135C-5-4/9.155C-5-4/9.175C-5-4/9.115C-5-4/9.155C-5-4/9.175C-5-4/9.3.25C-5-4/9.255C-5-4/9.195C-5-4/23.15C

8、-5-4/23.5Fuel Oil Tank Top5C-5-4/25.15C-5-4/25.3741 5C-5-4/19.13.1 In equation for t, “0.73s” to read “0.73sk”. 756 5C-5-4/25.1 In equation for t, “0.73s” to read “0.73sk”. Part 5C Specific Vessel Types Chapter 13 Vessels Using Gases or other Low-Flashpoint Fuels Section 6 Fuel Containment System 1902 5C-13-6/7.2.5.1 Revise “0oC” to read “0C”. 1907 5C-13-6/9.2.1 Revise “32oC” and “45oC” to read “32C” and “45C”, respectively. 2 ABSRULES FOR BUILDING AND CLASSING STEEL VESSELS .2018