ABS 190-2016 GUIDE FOR CREW HABITABILITY ON MOBILE OFFSHORE DRILLING UNITS (MODUs).pdf

《ABS 190-2016 GUIDE FOR CREW HABITABILITY ON MOBILE OFFSHORE DRILLING UNITS (MODUs).pdf》由会员分享，可在线阅读，更多相关《ABS 190-2016 GUIDE FOR CREW HABITABILITY ON MOBILE OFFSHORE DRILLING UNITS (MODUs).pdf（90页珍藏版）》请在麦多课文档分享上搜索。

1、 Guide for Crew Habitability on Mobile Offshore Drilling Units (MODUs) GUIDE FOR CREW HABITABILITY ON MOBILE OFFSHORE DRILLING UNITS (MODUs) FEBRUARY 2016 American Bureau of Shipping Incorporated by Act of Legislature of the State of New York 1862 Copyright 2016 American Bureau of Shipping ABS Plaza

2、 16855 Northchase Drive Houston, TX 77060 USA Foreword Foreword (1 February 2016) This Guide, originally published in September 2012, has undergone significant revision. Key revision areas include changes to the Whole-body Vibration (WBV), Noise, Lighting, and Accommodation Area criteria. These revi

3、sions are due to several factors, including: 1. Input from industry (i.e., Owners, designers, and construction yards) 2 Revisions to standards referenced in this Guide 3. Revised statutory regulations 4. Changes in current unit design practices and principles ABS has produced this Guide for Crew Hab

4、itability on Mobile Offshore Drilling Units (MODUs) in order to provide a single source for habitability criteria suitable for drilling units. This Guide may be applied to vessels falling under the categories of drillships, drill barges, self-elevating drilling units (SEDUs), column stabilized drill

5、ing units (CSDUs), or any other vessel used for the purposes of drilling. This Guide does not apply to vessels such as oil or chemical tankers, bulk or combination carriers, container carriers, multi-purpose cargo vessels, offshore support vessels, spars, floating production, storage and offloading

6、(FPSOs), tension leg platforms (TLPs), or offshore service vessels. These types of vessels are addressed in other ABS Habitability Guides*. This Guide provides the assessment criteria and describes the measurement methodology for obtaining a MODU Habitability notation. It is intended for use by Owne

7、rs or companies requesting the optional notation of MODU Habitability HAB(MODU), MODU Habitability Plus HAB+(MODU), or MODU Habitability Plus Plus HAB+(MODU). For the HAB(MODU) level, this Guide focuses on five (5) categories of habitability criteria that can affect task performance and can be contr

8、olled, measured, and assessed in personnel work, rest, and recreation areas of drilling units. These categories are: personnel accommodation area design, whole-body vibration (separate criteria for accommodation areas and work spaces), noise, indoor climate, and lighting. For the HAB+(MODU) level, t

9、his Guide invokes more stringent accommodation area, whole-body vibration, and noise criteria aimed at increasing personnel comfort and safety. For the HAB+(MODU) level, there are more stringent whole-body vibration, noise, and indoor climate criteria. To be awarded any of these notations, a drillin

10、g unit must meet the appropriate prescriptive criteria across the various habitability categories. In addition to the HAB notation assignment, at the Owners request, ABS may review the accommodation area design for compliance with ILO MLC, 2006 Title 3 requirements, as related to the MLC-ACCOM notat

11、ion. * Note: The other ABS Habitability Guides include: ABS Guide for Crew Habitability on Ships, ABS Guide for Crew Habitability on Workboats, and ABS Guide for Crew Habitability on Offshore Installations. This Guide becomes effective on the first day of the month of publication. Users are advised

12、to check periodically on the ABS website www.eagle.org to verify that this version of this Guide is the most current. We welcome your feedback. Comments or suggestions can be sent electronically by email to rsdeagle.org. ii ABSGUIDE FOR CREW HABITABILITY ON MOBILE OFFSHORE DRILLING UNITS (MODUs) .20

13、16 Table of Contents GUIDE FOR CREW HABITABILITY ON MOBILE OFFSHORE DRILLING UNITS (MODUs) CONTENTS SECTION 1 General 1 1 Introduction . 1 2 Application 1 3 Scope 1 4 Terminology 2 5 Associated Documentation . 3 6 Notation . 3 7 Data and Plans to be Submitted . 4 7.1 General 4 7.2 Personnel Accommod

14、ation Areas . 4 7.3 Ambient Environment 4 8 Process for Obtaining a Notation 5 8.1 Personnel Accommodation Areas . 6 8.2 Ambient Environment 7 8.3 Results 8 9 Initial Requirements 8 10 Surveys after Construction 8 11 Alternatives . 8 11.1 General 8 11.2 National Regulations . 8 11.3 Departures from

15、Criteria 8 TABLE 1 Threshold for Measurements to be Considered Close to Non-Compliance . 7 FIGURE 1 Process for Obtaining a Habitability Notation . 6 SECTION 2 Personnel Accommodation Areas 9 1 Background . 9 2 Scope 9 3 Terminology 9 4 Associated Documentation . 9 5 Criteria . 10 ABSGUIDE FOR CREW

16、HABITABILITY ON MOBILE OFFSHORE DRILLING UNITS (MODUs) .2016 iii 6 Personnel Accommodation Area Documentation . 10 6.1 Data Requirements 10 7 Submittal Review and Verification 10 8 Results 10 SECTION 3 Whole-body Vibration 11 1 Background . 11 2 Scope 11 3 Terminology 11 4 Associated Documentation .

17、 12 5 Criteria . 13 6 Test Plan . 14 6.1 Documentation 14 6.2 Test Personnel 14 6.3 Test Conditions 14 6.4 Measurement Locations 14 6.5 Data Acquisition and Instruments 14 6.6 Data Analysis . 14 6.7 Test Schedule 14 6.8 Data Collection Sheets 15 6.9 Conflict of Interest Declaration . 15 7 Test Requi

18、rements 15 7.1 General 15 7.2 Data Acquisition and Instruments 15 7.3 Test Conditions 15 7.4 Measurement Locations 16 8 Test Report . 18 8.1 Test Details 18 8.2 Transducer Placement Positions . 18 8.3 Measurement Equipment Details . 18 8.4 Results . 18 8.5 Deviations 19 8.6 Surveyor Witnessing Docum

19、entation . 19 9 Results 19 TABLE 1 Maximum Weighted Root-Mean-Square Acceleration Level 14 TABLE 2 Distribution of Transducer Positions Within Spaces . 17 FIGURE 1 Measurement Axes . 13 SECTION 4 Noise 20 1 Background . 20 2 Scope 20 3 Terminology 20 4 Associated Documentation . 21 iv ABSGUIDE FOR C

20、REW HABITABILITY ON MOBILE OFFSHORE DRILLING UNITS (MODUs) .2016 5 Criteria . 21 5.1 Equivalent Continuous A-weighted Sound Pressure Level 21 5.2 Acoustic Insulation 21 6 Test Plan . 22 6.1 Documentation 23 6.2 Test Personnel 23 6.3 Test Conditions . 23 6.4 Measurement Locations 23 6.5 Data Acquisit

21、ion and Instruments 23 6.6 Data Analysis 23 6.7 Test Schedule . 23 6.8 Data Collection Sheets 23 6.9 Conflict of Interest Declaration 23 7 Test Requirements 24 7.1 General 24 7.2 Data Acquisition and Instruments 24 7.3 Test Conditions . 24 7.4 Measurement Locations 25 7.5 Measurement Procedures and

22、Recorded Results . 26 8 Test Report . 26 8.1 Test Details . 26 8.2 Measurement Positions . 27 8.3 Measurement Equipment Details 27 8.4 Results 27 8.5 Deviations 27 8.6 Surveyor Witnessing Documentation 27 9 Results 27 TABLE 1 Noise Criteria for MODUs . 22 SECTION 5 Indoor Climate 28 1 Background . 2

23、8 2 Scope 28 3 Terminology 28 4 Associated Documentation . 29 5 Criteria . 29 5.1 Air Temperature 30 5.2 Relative Humidity 30 5.3 Enclosed Space Vertical Gradient . 30 5.4 Air Velocity 30 5.5 Personnel Cabin Area Horizontal Gradient 30 5.6 Air Supply Quantity 30 5.7 Summary . 30 6 Test Plan . 31 6.1

24、 Documentation 31 6.2 Test Personnel 31 6.3 Test Conditions . 31 ABSGUIDE FOR CREW HABITABILITY ON MOBILE OFFSHORE DRILLING UNITS (MODUs) .2016 v 6.4 Measurement Locations 31 6.5 Data Acquisition and Instruments 31 6.6 Data Analysis . 32 6.7 Test Schedule 32 6.8 Data Collection Sheets 32 6.9 Conflic

25、t of Interest Declaration . 32 7 Test Requirements 32 7.1 General 32 7.2 Data Acquisition and Instruments 32 7.3 Test Conditions 33 7.4 Measurement Locations 34 8 Test Report . 35 8.1 Test Details 35 8.2 Transducer Placement Positions . 35 8.3 Measurement Equipment Details . 35 8.4 Results . 35 8.5

26、Deviations 36 8.6 Surveyor Witnessing Documentation . 36 9 Results 36 TABLE 1 Summary of Indoor Climate Requirements . 31 SECTION 6 Lighting . 37 1 Background . 37 2 Scope 37 3 Terminology 37 4 Associated Documentation . 38 5 Criteria . 38 5.1 General and Task Lighting . 39 5.2 Red or Low-level Whit

27、e Illuminance . 39 6 Test Plan . 42 6.1 Documentation 42 6.2 Test Personnel 42 6.3 Test Conditions 42 6.4 Measurement Locations 43 6.5 Data Acquisition and Instruments 43 6.6 Data Analysis . 43 6.7 Test Schedule 43 6.8 Data Collection Sheets 43 6.9 Conflict of Interest Declaration . 43 7 Test Requir

28、ements 43 7.1 General 43 7.2 Data Acquisition and Instruments 43 7.3 Test Conditions 44 7.4 Measurement Locations 44 vi ABSGUIDE FOR CREW HABITABILITY ON MOBILE OFFSHORE DRILLING UNITS (MODUs) .2016 8 Test Report . 46 8.1 Test Details . 46 8.2 Measurement Positions . 46 8.3 Measurement Equipment Det

29、ails 46 8.4 Results 46 8.5 Deviations 47 8.6 Surveyor Witnessing Documentation 47 9 Results 47 TABLE 1 Lighting Criteria for Personnel Accommodation Spaces 39 TABLE 2 Lighting Criteria for Entrances and Passageways 39 TABLE 3 Lighting Criteria for Navigation and Control Spaces . 40 TABLE 4 Lighting

30、Criteria for Service Spaces 40 TABLE 5 Lighting Criteria for Operating and Maintenance Spaces/Areas 41 TABLE 6 Lighting Criteria for Offshore and Drilling Operations . 42 TABLE 7 Lighting Criteria for Red or Low-level White Illuminance 42 TABLE 8 Distribution of Measurement Positions within Spaces 4

31、5 APPENDIX 1 References 48 1 General References 48 2 Accommodation Area References 48 3 Whole-body Vibrations References 50 4 Noise References . 50 5 Indoor Climate References . 51 6 Lighting References 51 APPENDIX 2 Procedural Requirements for ABS Recognized Ambient Environmental Testing Specialist

32、s . 52 1 Terminology (1 February 2016) 52 2 Objective . 52 3 Application 52 4 Procedure for Approval and Certification 53 4.1 Documentation Requirements . 53 4.2 General Requirements 53 4.3 Auditing of the Testing Specialist 54 4.4 Certification . 54 4.5 Quality Assurance System 54 4.6 Testing Speci

33、alist Relations with the Test Equipment Manufacturer . 55 5 Certificate of Approval . 55 5.1 Renewal 55 6 Alterations . 55 7 Cancellation of Approval . 56 ABSGUIDE FOR CREW HABITABILITY ON MOBILE OFFSHORE DRILLING UNITS (MODUs) .2016 vii 8 Detailed Requirements by Ambient Environmental Aspect 56 8.1

34、 Whole-body Vibration 56 8.2 Noise . 57 8.3 Indoor Climate . 59 8.4 Lighting 60 APPENDIX 3 Accommodation Area Criteria . 62 General 63 Access/Egress . 64 Personnel Cabins . 67 Sanitary Spaces . 70 Office 73 Food Service Areas . 74 Recreation 77 Laundry 78 Medical . 79 APPENDIX 4 Acronyms and Abbrevi

35、ations 80 APPENDIX 5 Associated Documentation . 82 viii ABSGUIDE FOR CREW HABITABILITY ON MOBILE OFFSHORE DRILLING UNITS (MODUs) .2016 Section 1: General SECTION 1 General 1 Introduction ABS recognizes the positive impact that suitable habitability criteria and design practices may have on the safet

36、y, productivity, morale, and overall well-being of personnel. The ABS Guide for Crew Habitability on Mobile Offshore Drilling Units (MODUs) has been developed with the objective of improving the quality of personnel performance and comfort by improving working and living environments in terms of acc

37、ommodation area design and ambient environmental qualities. These habitability criteria have been chosen to provide a means to help reduce personnel fatigue, improve performance and safety, and to assist with personnel recruiting and retention. 2 Application (1 February 2016) This Guide is applicabl

38、e to new and existing drilling units for which an optional MODU Habitability (HAB(MODU), MODU Habitability Plus (HAB+(MODU), or MODU Habitability Plus Plus (HAB+(MODU) notation has been requested. The habitability criteria are a measure of the acceptability of personnel accommodation areas and work

39、spaces for living and working. In addition to the HAB(MODU) notation assignment, at the Owners request, ABS may review the accommodation area design for compliance with ILO MLC, 2006 Title 3 requirements, as related to the MLC-ACCOM notation. ABS has produced this Guide for Crew Habitability on Mobi

40、le Offshore Drilling Units (MODUs) in order to provide a single source for habitability criteria suitable for drilling units. This Guide may be applied to vessels falling under the categories of drillships, drill barges, self-elevating drilling units (SEDUs), column stabilized drilling units (CSDUs)

41、, or any other vessel used for the purposes of drilling. This Guide does not apply to vessels such as oil or chemical tankers, bulk or combination carriers, container carriers, multi-purpose cargo vessels, offshore support vessels, spars, floating production, storage and offloading (FPSOs), tension

42、leg platforms (TLPs), or offshore service vessels. These types of vessels are addressed in other ABS Habitability Guides. 3 Scope This Guide focuses on five (5) habitability aspects of drilling unit design and layout that can be controlled, measured, and assessed. These five (5) aspects are broken i

43、nto two (2) categories in this Guide, personnel accommodation areas and the ambient environment. Accommodation area criteria pertain to dimensional and outfitting aspects of spaces and open deck areas where personnel eat, sleep, recreate, and perform routine daily activities. The ambient environment

44、al aspects of habitability pertain to the environment that personnel are exposed to during periods of work, leisure, and rest. Specifically, this Guide provides criteria, limits, and measurement methodologies for the following: i) Whole-body Vibration (separate criteria for personnel accommodation a

45、reas and work spaces) ii) Noise iii) Indoor Climate iv) Lighting ABSGUIDE FOR CREW HABITABILITY ON MOBILE OFFSHORE DRILLING UNITS (MODUs) .2016 1 Section 1 General The criteria provided in this Guide are based on currently available research data and standards for the purpose of improving personnel

46、performance and providing a base level of habitability and elements of safety related to habitability. While producing this Guide, ABS has taken a practical approach to measurements, test personnel (Testing Specialists), and test equipment. 4 Terminology (1 February 2016) ABS Recognized Ambient Envi

47、ronmental Testing Specialists: Companies providing test or measurement services on behalf of the Owner of a vessel/unit or shipyard for the purposes of meeting any of the ABS MODU Habitability (HAB(MODU), HAB+(MODU), HAB+(MODU) notation requirements. Approval of the Testing Specialist for drilling u

48、nits may also allow for testing and measurement services for other ABS Habitability, Comfort, and MLC notations. Ambient Environment: Ambient environment refers to the environmental conditions that personnel are exposed to during periods of work, leisure, or rest. Specifically, this Guide provides c

49、riteria and limits for whole-body vibration, noise, indoor climate, and lighting. Associated Documentation: Documents referenced in this Guide that are needed to provide measuring techniques and further guidance. Drilling: To be considered actively drilling, the vessel/unit shall have drill pipe in the hole and shall be running all the systems normally associated with drilling operations (e.g., mud pumps, shale shakers, etc.). Tripping, running casing, driving conductor, etc., are not considered part of normal drilling operations. Dynamic Positioning: A system to automatically