API RP 2FB-2006 Recommended Practice for the Design of Offshore Facilities Against Fire and Blast Loading (FIRST EDITION)《浮式生产系统规划、设计及建造的推荐作法.第1版》.pdf

《API RP 2FB-2006 Recommended Practice for the Design of Offshore Facilities Against Fire and Blast Loading (FIRST EDITION)《浮式生产系统规划、设计及建造的推荐作法.第1版》.pdf》由会员分享，可在线阅读，更多相关《API RP 2FB-2006 Recommended Practice for the Design of Offshore Facilities Against Fire and Blast Loading (FIRST EDITION)《浮式生产系统规划、设计及建造的推荐作法.第1版》.pdf（76页珍藏版）》请在麦多课文档分享上搜索。

1、Recommended Practice for the Design of Offshore Facilities Against Fire and Blast LoadingAPI RECOMMENDED PRACTICE 2FBFIRST EDITION, APRIL 2006REAFFIRMED, JANUARY 2012Recommended Practice for the Design of Offshore Facilities Against Fire and Blast LoadingUpstream SegmentAPI RECOMMENDED PRACTICE 2FBF

2、IRST EDITION, APRIL 2006REAFFIRMED, JANUARY 2012iv SPECIAL NOTES API publications necessarily address problems of a general nature. With respect to particular circumstances, local, state, and federal laws and regulations should be reviewed. Neither API nor any of APIs employees, subcontractors, cons

3、ultants, committees, or other assignees make any warranty or representation, either express or implied, with respect to the accuracy, completeness, or usefulness of the information contained herein, or assume any liability or responsibility for any use, or the results of such use, of any information

4、 or process disclosed in this publication. Neither API nor any of APIs employees, subcontractors, consultants, or other assignees represent that use of this publication would not infringe upon privately owned rights. API publications may be used by anyone desiring to do so. Every effort has been mad

5、e by the Institute to assure the accuracy and reliability of the data contained in them; however, the Institute makes no representation, warranty, or guarantee in connection with this publication and hereby expressly disclaims any liability or responsibility for loss or damage resulting from its use

6、 or for the violation of any authorities having jurisdiction with which this publication may conflict. API publications are published to facilitate the broad availability of proven, sound engineering and operating practices. These publications are not intended to obviate the need for applying sound

7、engineering judgment regarding when and where these publications should be utilized. The formulation and publication of API publications is not intended in any way to inhibit anyone from using any other practices. Any manufacturer marking equipment or materials in conformance with the marking requir

8、ements of an API standard is solely responsible for complying with all the applicable requirements of that standard. API does not represent, warrant, or guarantee that such products do in fact conform to the applicable API standard. All rights reserved. No part of this work may be reproduced, stored

9、 in a retrieval system, or transmitted by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission from the publisher. Contact the Publisher, API Publishing Services, 1220 L Street, N.W., Washington, D.C. 20005. Copyright 2006 American Petroleum Inst

10、itutev FOREWORD This recommended practice is under jurisdiction of the API Subcommittee on Offshore Structures. This Recommended Practice for the Design of Offshore Structures against Fire and Blast Loading is based on sound engineering principles and many years of experience gained by the owners, o

11、perators, designers, fabricators, suppliers, and classification/certification agencies of offshore facilities. In no case is any specific recommendation included that could not be accomplished by presently available techniques and equipment. Consideration is given in all cases to the safety of perso

12、nnel, compliance with existing regulations, and prevention of pollution. This recommended practice has been developed with the help and extensive contributions from industry experts of different areas of expertise. This recommended practice covers both fixed and floating structures that are in use b

13、y the industry as offshore oil and gas production systems. These include systems supported by column-stabilized units (semi-submersible vessels), ship-shaped vessels, Tension Leg Platforms (TLP), deep draft caisson vessels (also known as SPARs), and other hull shapes. This recommended practice provi

14、des an assessment process for the consideration of fire and blast in the design of offshore structures and includes guidance and examples for setting performance criteria. This document complements the contents of the Section 18 of API RP 2A, 21stEdition with more comprehensive guidance in design of

15、 both fixed and floating offshore structures against fire and blast loading. Guidance on the implementation of safety and environmental management practices and hazard identification, event definition and risk assessment can be found in API RP 75 51 and the API RP 14 series 52, 53. The interface wit

16、h these documents is identified and emphasized throughout, as structural engineers need to work closely with facilities engineers experienced in performing hazard analysis as described in API RP 14J 52, and with the operators safety management system as described in API RP 75 51. This recommended pr

17、actice provides general guidelines for incorporating hazard analysis output into the structural response assessment in determining whether the structure or its components meet the specified performance criteria. This recommended practice includes code provisions and associated commentary. The commen

18、tary provides design guidelines for the evaluation of structural response to fire and blast loads. Nominal blast load cases are provided for certain classes of facilities. Guidance is also provided for the calculation of fire loads. Discussion of alternative methods for the calculation of blast load

19、s, in lieu of applicable nominal load cases, is included with reference to sources of detailed guidance. The commentary also includes examples of good practice for fire and blast design including guidelines for facilities layout and structural connection detailing. Nothing contained in any API publi

20、cation is to be construed as granting any right, by implication or otherwise, for the manufacture, sale, or use of any method, apparatus, or product covered by letters patent. Neither should anything contained in the publication be construed as insuring anyone against liability for infringement of l

21、etters patent. This document was produced under API standardization procedures that ensure appropriate notification and participation in the developmental process and is designated as an API standard. Questions concerning the interpretation of the content of this publication or comments and question

22、s concerning the procedures under which this publication was developed should be directed in writing to the Director of Standards, American Petroleum Institute, 1220 L Street, N.W., Washington, D.C. 20005. Requests for permission to reproduce or translate all or any part of the material published he

23、rein should also be addressed to the director. Generally, API standards are reviewed and revised, reaffirmed, or withdrawn at least every five years. A one-time extension of up to two years may be added to this review cycle. Status vi of the publication can be ascertained from the API Standards Depa

24、rtment, telephone (202) 682-8000. A catalog of API publications and materials is published annually and updated quarterly by API, 1220 L Street, N.W., Washington, D.C. 20005. Suggested revisions are invited and should be submitted to the Standards and Publications Department, API, 1220 L Street, NW,

25、 Washington, DC 20005, standardsapi.org. vii CONTENTS 0 DEFINITIONS. 1 1 GENERAL. 2 2 RISK ASSESSMENT 3 2.1 General. 3 2.2 Screening . 3 2.3 Nominal Loads 4 2.4 Event Based. 4 2.5 Probability of Event 5 2.6 Consequence of Event. 6 2.7 Performance Criteria . 7 2.8 Risk Assessment Process 8 3 FIRE AS

26、A LOAD CONDITION 10 4 STRUCTURAL RESPONSE ASSESSMENT AGAINST FIRE 10 5 FIRE MITIGATION 12 5.1 General. 12 5.2 Firewalls 12 5.3 Passive Fire Protection 13 6 BLAST AS A LOAD CONDITION 14 6.1 Blast Overpressure 14 6.2 Drag Loads 15 6.3 Shock and Global Reaction Loads . 15 7 STRUCTURAL RESPONSE ASSESSME

27、NT AGAINST BLAST 15 7.1 Dynamic Effects 15 7.2 Structural Assessment for Blast 15 7.3 Blast Load Levels 17 8 BLAST MITIGATION 17 8.1 Mitigation of the consequences of blast. 17 8.2 Ventilation . 18 8.3 Blast Relief Panels 18 8.4 Blast Walls. 18 9 FIRE AND BLAST INTERACTION 18 10 FLOATING STRUCTURES.

28、 18 10.1 Characteristics of Floating Structures 19 10.2 Specific Issues with Floating Structures 19 10.3 Specific Design Issues 22 11 MATERIAL. 22 12 LIMITED CONSTRUCTION GUIDANCE 22 12.1 Plating 22 12.2 Braces and Struts to Ceiling Ties . 22 12.3 Beams 22 viii 13 GOOD PRACTICE DETAILING . 23 COMMEN

29、TARY 25 COMMENTARY ON SECTION 2RISK ASSESSMENT. 25 COMMENTARY ON SECTION 3FIRE AS A LOAD CONDITION. 25 COMMENTARY ON SECTION 4STRUCTURAL RESPONSE ASSESSMENT AGAINST FIRE. 33 COMMENTARY ON SECTION 6BLAST AS A LOAD CONDITION. 36 COMMENTARY ON SECTION 7STRUCTURAL ASSESSMENT AGAINST BLAST 50 COMMENTARY

30、SECTION 9FIRE AND BLAST INTERACTION 53 COMMENTARY ON SECTION 11MATERIALS 54 REFERENCES . 62 Figures 2.4-1 Risk Matrix 5 2.8-1 Risk Assessment Process 9 4-1 Process of Structural Assessment against Fire. 11 7-1 Process of Structural Assessment against Blast . 16 C.3.2.1-1 Pool Fire. 26 C.3.2.2-1 View

31、 Factor for Open and Confined Fires . 28 C.3.2.2-2 Common View Factors . 29 C.3.3-1 Jet Fire 29 C.6.3.3-1 Overpressure Duration Relationship - Hoiset 38 42 C.6.5-1 Idealized Pressure Trace for a Hydrocarbon Blast. 43 C.6.6-1 Generic Response Spectra for a Hydrocarbon Blast46 C.6.7-1 Blast in a Compa

32、rtment. 47 C.6.7-2 Drag Loading on Piping Typical Time-History 48 C.13-1 Layout Options 59 C.13-2 Blast Wall Support Details 60 C.13-3 Blast Wall Panels and Penetration Details .61 Tables 5.2-1 Performance Standard for Fire Walls by Rating (For Pool Fire) 14 10.1-1 Floating Installations Sub-systems

33、 .19 C.4.1.1-1 Maximum Allowable Temperature of Steel. 34 C.4.1.1-2 Yield Stress Reduction Factor with Maximum Member Temperature.35 C.6.3.1-1 Unmodified Nominal Overpressures by Installation Type40 C.6.3.2-1 Load Modifiers 41 C.6.4-1 Minimum Blast Overpressure from DNV 9 43 C.11.1-1 Thermal Propert

34、ies of Steel. 54 C.11.2-1 Youngs Modulus and Yield Stress Reduction Factors for Carbon Steel at ElevatedTemperature (ASTM A-36 and A-633 GR.C and D) 54 C.11.4-1 Values of D and q for Different Materials 56 C.11.4.1-2 Strain Rate for Different Stress Conditions57 C.11.4.1-3 Dynamic Strength Increase

35、Factor 39 57 C.11.6-1 Ductility Ratios for Steel Beams (y 50 ksi) 58 1 Recommended Practice for the Design of Offshore Facilities Against Fire and Blast Loading 0 Definitions Blast Relief Panel: Parts of a module wall, ceiling or roof, which are designed to increase the area of venting in an explosi

36、on by being opened or removed by the force of the explosion. Blast Wall: A structural barrier, which is designed expressly for the purpose of resisting blast loads. Blow-down: The rapid controlled or accidental depressurization of a vessel or piping network. Cellulosic Fire: A fire with a fuel sourc

37、e predominantly of cellulose (e.g. timber, paper, cotton). A fire involving these materials is relatively slow growing, although its intensity may ultimately reach or exceed that of a hydrocarbon fire. Conduction: The mode of heat transfer associated with solids. Each solid has a temperature depende

38、nt factor, which is a measure of the rate of conduction. Convection: Heat transfer associated with fluid movement around a heated body; warmer, less dense fluid rises and is replaced by cooler, denser fluid. Ductility Ratio: The ratio of the total deflection to the deflection at elastic limit. The d

39、eflection at elastic limit is the deflection at which strength behavior can be assumed to change from elastic to plastic. Emergency Shutdown System: A safety shutdown system comprising detection, signaling and logical control, valves and actuators, which can, in tandem with alarm and direct control

40、mechanisms, enable the safe and effective shutdown of plant and machinery in a controlled manner. Emmissivity: A constant used to quantify the radiation emission characteristics of a flame. Emmissivity of a perfect black body is 1. Fixed Platform: A platform extending above and supported by the sea

41、bed by means of piling, spread footings or other means with the intended purpose of remaining stationary over an extended period. Heat Flux (heat density): The rate of heat transfer per unit area normal to the direction of heat flow. A convenient unit is kW m-2(1 kW m-2= 317 Btu ft-2h-1). It is a to

42、tal of heat transmitted by radiation, conduction and convection. Hydrocarbon Fire: A fire fuelled by hydrocarbon compounds, having a high flame temperature achieved almost instantaneously after ignition. A hydrocarbon fire will spread rapidly, burn fiercely and produce a high heat flux. Mass Burning

43、 Rate: The mass-burning rate of a pool fire is the mass of fuel supplied to the flame per unit time, per unit area of the pool. Units are typically kg/m2/sec. Mitigation: Mitigation actions are defined as modifications or operational procedures that reduce loads, increase capacities, or reduce expos

44、ure. Nominal Value: The value assigned to a basic variable determined on a non-statistical basis, typically from acquired experience or physical conditions ISO 32. Operator: The person, firm, corporation or other organization employed by the owners to conduct operations. PFP: Passive Fire Protection

45、 Prevention: The action that is taken to reduce the probability of an event in order to reduce the overall risk that the event poses to the platform.2 API RECOMMENDED PRACTICE 2FB Safety Critical Element: Any component part of structure, equipment, plant or system whose failure could cause a major a

46、ccident. Specific Heat: The amount of heat, measured in Joules, required to raise the temperature of one kilogram of a substance by one degree C. Units are Joules/kg/C. Surface Emissive Power (SEP): The heat radiated outwards from a flame per unit surface area of the flame. Units are kW/m2. Survival

47、: For purposes of fire and blast consideration, survival means demonstration that at least one escape route and the temporary refuge or safe mustering area are maintained for a sufficient period of time to allow platform evacuation and emergency response procedure, in accordance with the safety phil

48、osophy defined by the owner/operator of the platform. Temporary Refuge (TR) or Safe Mustering Area: An area of the platform that will enable the occupants to survive the defined fire or blast event. The area must also be safely accessible by personnel not in the immediate vicinity of the event and p

49、rovide access to the primary escape route. Unmanned Platform: A platform upon which persons may be employed at any one time, but upon which no living accommodations or quarters are provided. Utilization Ratio: The ratio of actual stress to allowable stress. AISC: American Institute of Steel Construction API: American Petroleum Institute ASCE: American Society of Civil Engineers ASTM: American Society of Testing and Materials AWS: American Welding Society ISO: International Organization for Standar