API RP 753-2007 Management of Hazards Associated with Location of Process Plant Portable Buildings (First Edition)《与处理厂移动建筑物位置有关的危害管理.第1版》.pdf

《API RP 753-2007 Management of Hazards Associated with Location of Process Plant Portable Buildings (First Edition)《与处理厂移动建筑物位置有关的危害管理.第1版》.pdf》由会员分享，可在线阅读，更多相关《API RP 753-2007 Management of Hazards Associated with Location of Process Plant Portable Buildings (First Edition)《与处理厂移动建筑物位置有关的危害管理.第1版》.pdf（34页珍藏版）》请在麦多课文档分享上搜索。

1、Management of Hazards Associated with Location of Process Plant Portable BuildingsAPI RECOMMEDED PRACTICE 753FIRST EDITION, JUNE 2007REAFFIRMED, JANUARY 2012Management of Hazards Associated with Location of Process Plant Portable BuildingsDownstream SegmentAPI RECOMMENDED PRACTICE 753FIRST EDITION,

2、JUNE 2007REAFFIRMED, JANUARY 2012SPECIAL NOTESAPI publications necessarily address problems of a general nature. With respect to particular circumstances, local, state, and federal laws and regulations should be reviewed.Neither API nor any of APIs employees, subcontractors, consultants, committees,

3、 or other assignees make any warranty or representation, either express or implied, with respect to the accuracy, completeness, or usefulness of the information contained herein, or assume any liability or responsibility for any use, or the results of such use, of any information or process disclose

4、d in this publication. Neither API nor any of APIs employees, subcontractors, con-sultants, or other assignees represent that use of this publication would not infringe upon pri-vately owned rights.Users of this recommended practice should not rely exclusively on the information con-tained in this d

5、ocument. Sound business, scientific, engineering, and safety judgement should be used in employing the information contained herein.API is not undertaking to meet the duties of employers, manufacturers, or suppliers to warn and properly train and equip their employees, and others exposed, concerning

6、 health and safety risks and precautions, nor undertaking their obligations to comply with authorities having jurisdiction.Where applicable, authorities having jurisdiction should be consulted.Work sites and equipment operations may differ. Users are solely responsible for assessing their specific e

7、quipment and premises in determining the appropriateness of applying the RP. At all times users should employ sound business, scientific, engineering, and judgement safety when using this RP.API publications may be used by anyone desiring to do so. Every effort has been made by the Institute to assu

8、re the accuracy and reliability of the data contained in them; however, the Institute makes no representation, warranty, or guarantee in connection with this publication and hereby expressly disclaims any liability or responsibility for loss or damage resulting from its use or for the violation of a

9、ny authorities having jurisdiction with which this publi-cation may conflict.API publications are published to facilitate the broad availability of proven, sound engineer-ing and operating practices. These publications are not intended to obviate the need for applying sound engineering judgment rega

10、rding when and where these publications should be utilized. The formulation and publication of API publications is not intended in any way to inhibit anyone from using any other practices.Any manufacturer marking equipment or materials in conformance with the marking requirements of an API standard

11、is solely responsible for complying with all the applicable requirements of that standard. API does not represent, warrant, or guarantee that such prod-ucts do in fact conform to the applicable API standard.All rights reserved. No part of this work may be reproduced, stored in a retrieval system, or

12、 transmitted by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission from the publisher. Contact the Publisher, API Publishing Services, 1220 L Street, N.W., Washington, D.C. 20005.Copyright 2007 American Petroleum InstituteFOREWORDThe purpose of

13、 this recommended practice (RP) is to provide guidance for reducing the risk to personnel located in portable buildings from potential explosion, fire and toxic release hazards. The document is based on the following guiding principles, (1) locate personnel away from covered process areas consistent

14、 with safe and effective operations, (2) minimize the use of occupied portable buildings near covered process areas, (3) manage the occupancy of portable buildings, especially during periods of increased risk including unit start-up or planned shut-down operations, (4) design, construct, install, an

15、d maintain occupied portable buildings to protect occupants against potential hazards, and (5) manage the use of portable buildings as an integral part of the design, construction, maintenance, and operation of a facility. The recommended practice is organized into five sections with two appendices

16、which provide the user with additional technical background and guidance.Section 1 defines the purpose and scope of the document. Section 1 also provides the guid-ing principles for the development of this document and direction regarding implementation and change control.Section 2 addresses managem

17、ent of personnel in portable buildings. The topics include iden-tification of essential personnel and their use of portable buildings. Further, Section 2 addresses personnel that are not essential and makes recommendations regarding their loca-tion relative to covered process areas, including during

18、 times of non-routine operations. Sec-tion 2 also discusses portable buildings used for various purposes and identifies those that require evaluation for siting relative to covered process areas. This includes criteria such as occupancy and purpose of the portable building.Sections 3, 4 and 5 addres

19、s explosion, fire, and toxic release hazards respectively. This docu-ment is based on a philosophy that portable buildings are primarily sited (located) in relation to explosion hazards in the area as described in Section 3. Risks associated with fire and toxic release hazards are managed as describ

20、ed in Sections 4 and 5.The Appendices include two parts. Appendix A describes the technical bases of certain key topics or criteria provided in this document. Appendix B provides guidance on determining congested volumes used in vapor cloud explosion calculations along with examples to dem-onstrate

21、that guidance.As used in this document, “shall” denotes a minimum requirement in order to conform to the recommended practice. “Should” denotes a recommendation, or that, which is advised but not required in order to conform to the recommended practice.Nothing contained in any API publication is to

22、be construed as granting any right, by impli-cation or otherwise, for the manufacture, sale, or use of any method, apparatus, or product covered by letters patent. Neither should anything contained in the publication be construed as insuring anyone against liability for infringement of letters paten

23、t.This document was produced under API standardization procedures that ensure appropriate notification and participation in the developmental process and is designated as an API rec-ommended practice. Questions concerning the interpretation of the content of this publica-tion or comments and questio

24、ns concerning the procedures under which this publication was developed should be directed in writing to the Director of Standards, American Petroleum Institute, 1220 L Street, N.W., Washington, D.C. 20005. Requests for permission to repro-duce or translate all or any part of the material published

25、herein should also be addressed to the director.iiiGenerally, API recommended practices are reviewed and revised, reaffirmed, or withdrawn at least every five years. A one-time extension of up to two years may be added to this review cycle. Status of the publication can be ascertained from the API S

26、tandards Depart-ment, telephone (202) 682-8000. A catalog of API publications and materials is published annually and updated quarterly by API, 1220 L Street, N.W., Washington, D.C. 20005.Suggested revisions are invited and should be submitted to the Standards and Publications Department, API, 1220

27、L Street, NW, Washington, D.C. 20005, standardsapi.org.CONTENTSPage1 GENERAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

28、 . . . . . . . . . . . .11.2 Purpose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11.3 Guiding Principles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11.4 Scope . . . . . . .

29、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11.5 Implementation and Change Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11.6 Relationship to API RP 752. . . . . . . . . . . . . . . . . . . . . . . . . . . .

30、 . . . . . . . . . . . . . . .11.7 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11.8 References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 MANAGEMENT O

31、F PERSONNEL IN PORTABLE BUILDINGS. . . . . . . . . . . . . . .32.1 Essential Personnel and Use of Portable Buildings . . . . . . . . . . . . . . . . . . . . . . . .32.2 Portable Buildings Intended for Occupancy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32.3 Portable Buildings Not In

32、tended for Occupancy . . . . . . . . . . . . . . . . . . . . . . . . . .42.4 Other Occupied Portable Structures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 METHODS FOR LOCATING PORTABLE BUILDINGS FOR EXPLOSION HAZARDS. . . . . . . . . . . . . . . . . . . . . . . . . . .

33、 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53.1 Simplified Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63.2 Detailed Analysis. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

34、. . . . . . .63.3 Light Wood Trailer Overpressure Damage Levels . . . . . . . . . . . . . . . . . . . . . . . . .73.4 Portable Building Blast Resistance Requirements . . . . . . . . . . . . . . . . . . . . . . . . .83.5 Additional Explosion Risk Reduction Practices . . . . . . . . . . . . . . . . .

35、. . . . . . . . . .84 FIRE HAZARDS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95 TOXIC RELEASE HAZARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9APPENDIX A BASES FOR FIGURE 1 AND TABLE 2

36、. . . . . . . . . . . . . . . . . . . . . . . . 11APPENDIX B GUIDANCE FOR LOCATING PORTABLE BUILDINGS . . . . . . . . . 13Figures1 Portable Buildings Location Guidance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5B.1 Example No. 1 Hypothetical Process Unit . . . . . . . . .

37、. . . . . . . . . . . . . . . . . . . . . . 15B.2 Example No. 2 Site Layout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17B.3 Close up of Process Areas that Represent Congested Volumes. . . . . . . . . . . . . . . 18B.4 Zone 3 to Zone 2 Transition Distances f

38、or Each Congested Volume . . . . . . . . . . 19B.5 Zone 2 to Zone 1 Transition Distances for Each Congested Volume . . . . . . . . . . 20B.6 Zones Created by Connecting the Outermost Transition Distances from Figures B.4 and B.5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

39、 . . . . . . . . 21B.7 Zones for Locating Occupied Portable Buildings . . . . . . . . . . . . . . . . . . . . . . . . . 22Tables1 Allowable Locations and Personnel for Portable Buildings Intended for Occupancy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

40、 . . . . . . . . . . . 62 Overpressure Effects on Light Wood Trailers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7A.1 Separation Distances from Figure 1 for Selected Congested Volumes . . . . . . . . . 12B.1 Zone Transition Distances. . . . . . . . . . . . . . . . . . . . . . . . . .

41、. . . . . . . . . . . . . . . . . . 16v1Management of Hazards Associated with Location of Process Plant Portable Buildings1 General1.1 INTRODUCTIONOccupied permanent buildings (e. g., control rooms, operator shelters) located near covered process areas are typically con-structed to be blast and fire

42、 resistant. In contrast, conventional portable buildings (i.e., light wood trailers) are typically not con-structed to be blast and fire resistant. Past explosion accidents have demonstrated that occupants of conventional portable buildings are susceptible to injuries from structural failures, build

43、ing collapse, and building debris and projectiles. 1.2 PURPOSEThe purpose of this recommended practice is to provide guidance for reducing the risk to personnel located in portable buildings from potential explosion, fire and toxic release hazards.1.3 GUIDING PRINCIPLESThis recommended practice is b

44、ased on the following guiding principles: Locate personnel away from covered process areas consistent with safe and effective operations Minimize the use of occupied portable buildings in close proximity to covered process areas Manage the occupancy of portable buildings, especially during periods o

45、f increased risk including unit start-up or planned shut-down operations Design, construct, install, and maintain occupied portable buildings to protect occupants against potential hazards Manage the use of portable buildings as an integral part of the design, construction, maintenance, and operatio

46、n of a facility1.4 SCOPEThis recommended practice was developed for refineries, petrochemical and chemical operations, natural gas liquids extraction plants, and other facilities such as those covered by the OSHA Process Safety Management Standard, 29 CFR 1910.119.1.5 IMPLEMENTATION AND CHANGE CONTR

47、OLThis recommended practice provides information that can be used when establishing or updating policies or procedures concern-ing the placement of portable buildings. Specific portable building siting guidelines and procedures for managing change shall be developed for the use and location of porta

48、ble buildings. Examples of changes that should be managed include: Reassigning personnel Changing process conditions Adding a building Modifying a building Reclassifying a building function (e. g., temporary to permanent) Relocating a building Introducing new hazards affecting a buildingFormal writt

49、en approval by senior management should be required for deviations from established company policies or procedures.1.6 RELATIONSHIP TO API RP 752This document supersedes API Recommended Practice 752 with regard to portable buildings. 1.7 DEFINITIONSFor the purpose of this recommended practice, the following definitions apply: 2 API RECOMMENDED PRACTICE 7531.7.1 confinement: A physical surface that inhibits the expansion of a flame front of a burning vapor cloud in at least one direction. Examples include solid decks, walls, or enclosures. 1.7.2 congested volume: The volume o