API RP 11S1-1997 Recommended Practice for Electrical Submersible Pump Teardown Report (THIRD EDITION Effective December 15 1997)《电动潜水泵拆卸报告的编写.第3版》.pdf
《API RP 11S1-1997 Recommended Practice for Electrical Submersible Pump Teardown Report (THIRD EDITION Effective December 15 1997)《电动潜水泵拆卸报告的编写.第3版》.pdf》由会员分享,可在线阅读,更多相关《API RP 11S1-1997 Recommended Practice for Electrical Submersible Pump Teardown Report (THIRD EDITION Effective December 15 1997)《电动潜水泵拆卸报告的编写.第3版》.pdf(40页珍藏版)》请在麦多课文档分享上搜索。
1、Recommended Practice for Electrical Submersible Pump Teardown ReportAPI RECOMMENDED PRACTICE 11S1THIRD EDITION, SEPTEMBER 1997EFFECTIVE DATE: DECEMBER 15, 1997REAFFIRMED, OCTOBER 2013Recommended Practice for Electrical Submersible Pump Teardown ReportUpstream SegmentAPI RECOMMENDED PRACTICE 11S1THIR
2、D EDITION, SEPTEMBER 1997EFFECTIVE DATE: DECEMBER 15, 1997REAFFIRMED, OCTOBER 2013SPECIAL NOTESAPI publications necessarily address problems of a general nature. With respect to partic-ular circumstances, local, state, and federal laws and regulations should be reviewed.API is not undertaking to mee
3、t the duties of employers, manufacturers, or suppliers towarn and properly train and equip their employees, and others exposed, concerning healthand safety risks and precautions, nor undertaking their obligations under local, state, or fed-eral laws.Information concerning safety and health risks and
4、 proper precautions with respect to par-ticular materials and conditions should be obtained from the employer, the manufacturer orsupplier of that material, or the material safety data sheet.Nothing contained in any API publication is to be construed as granting any right, byimplication or otherwise
5、, for the manufacture, sale, or use of any method, apparatus, or prod-uct covered by letters patent. Neither should anything contained in the publication be con-strued as insuring anyone against liability for infringement of letters patent.Generally, API standards are reviewed and revised, reaffirme
6、d, or withdrawn at least everyfive years. Sometimes a one-time extension of up to two years will be added to this reviewcycle. This publication will no longer be in effect five years after its publication date as anoperative API standard or, where an extension has been granted, upon republication. S
7、tatusof the publication can be ascertained from the API Authoring Department telephone (202)682-8000. A catalog of API publications and materials is published annually and updatedquarterly by API, 1220 L Street, N.W., Washington, D.C. 20005.This document was produced under API standardization proced
8、ures that ensure appropri-ate notification and participation in the developmental process and is designated as an APIstandard. Questions concerning the interpretation of the content of this standard or com-ments and questions concerning the procedures under which this standard was developedshould be
9、 directed in writing to the director of the Authoring Department (shown on the titlepage of this document), American Petroleum Institute, 1220 L Street, N.W., Washington,D.C. 20005. Requests for permission to reproduce or translate all or any part of the materialpublished herein should also be addre
10、ssed to the director.API standards are published to facilitate the broad availability of proven, sound engineer-ing and operating practices. These standards are not intended to obviate the need for apply-ing sound engineering judgment regarding when and where these standards should beutilized. The f
11、ormulation and publication of API standards is not intended in any way toinhibit anyone from using any other practices.Any manufacturer marking equipment or materials in conformance with the markingrequirements of an API standard is solely responsible for complying with all the applicablerequirement
12、s of that standard. API does not represent, warrant, or guarantee that such prod-ucts do in fact conform to the applicable API standard.All rights reserved. No part of this work may be reproduced, stored in a retrieval system, or transmitted by any means, electronic, mechanical, photocopying, record
13、ing, or otherwise, without prior written permission from the publisher. Contact the Publisher, API Publishing Services, 1220 L Street, N.W., Washington, D.C. 20005.Copyright 1997 American Petroleum InstituteFOREWORDThis recommended practice is under the jurisdiction of the American Petroleum Institu
14、te(API) Subcommittee on Field Operating Equipment.This recommended practice shall become effective on the date printed on the cover butmay be used voluntarily from the date of distribution.API publications may be used by anyone desiring to do so. Every effort has been made bythe Institute to assure
15、the accuracy and reliability of the data contained in them; however, theInstitute makes no representation, warranty, or guarantee in connection with this publicationand hereby expressly disclaims any liability or responsibility for loss or damage resultingfrom its use or for the violation of any fed
16、eral, state, or municipal regulation with which thispublication may conflict.Suggested revisions are invited and should be submitted to the director of the Explorationand Production Department, American Petroleum Institute, 1220 L Street, N.W., Washing-ton, D.C. 20005.iiiCONTENTSPage1 SCOPE . . . .
17、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 ADDITIONAL INFORMATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1APPENDIX ARECOMMENDED PRACTICE FOR API RP 11S1 TEARDOWN REPORTING DATABA
18、SES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11APPENDIX BTEARDOWN REPORT QUERIES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Figures1 Typical Motor Section 32 Typical Seal Chamber Section Types. 53 Typical Pump Section. 74 Typical
19、 Gas Separator Section Types. 9A-1 Relationship Diagram for Teardown Reporting 15A-2 Recommended Observation Codes for ESP Teardown. 16A-3 Pertinent Data . 18A-4 Teardown Observation Data. 19A-5 Pertinent Data (Equipment Identification). 20A-6 Common Terms for Remarks Teardown Observation Code Break
20、down Table 21A-7 Common Terms for Remarks Observation Code Breakdown. 22A-8 Reason for Pump Pull. 22A-9 Failure Codes 22B-1 Example 1: Teardown Report Queries. 25B-2 Example 2: Teardown Report Queries. 27v1Recommended Practice for Electrical Submersible Pump Teardown Report1 ScopeThis recommended pr
21、actice covers a recommended electri-cal submersible pump teardown report form. It also includesequipment schematic drawings which may provide assistancein identifying equipment components. It should be noted thatthese schematics are for generic equipment components, andthere may be differences betwe
22、en manufacturers on the exactdescription or configuration of the assemblies.2 Additional InformationIn order to properly interpret the information gatheredusing this API recommended practice, the following data alsoshould be provided:a. Equipment amp charts.b. Production data prior to failure.c. Inf
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
5000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- APIRP11S11997RECOMMENDEDPRACTICEFORELECTRICALSUBMERSIBLEPUMPTEARDOWNREPORTTHIRDEDITIONEFFECTIVEDECEMBER151997

链接地址:http://www.mydoc123.com/p-399973.html