BS PD ISO IEC TR 30125-2016 Information technology Biometrics used with mobile devices《信息技术 移动设备使用生物统计学》.pdf

《BS PD ISO IEC TR 30125-2016 Information technology Biometrics used with mobile devices《信息技术 移动设备使用生物统计学》.pdf》由会员分享，可在线阅读，更多相关《BS PD ISO IEC TR 30125-2016 Information technology Biometrics used with mobile devices《信息技术 移动设备使用生物统计学》.pdf（40页珍藏版）》请在麦多课文档分享上搜索。

1、PD ISO/IEC TR 30125:2016 Information technology Biometrics used with mobile devices BSI Standards Publication WB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06PD ISO/IEC TR 30125:2016 PUBLISHED DOCUMENT National foreword This Published Document is the UK implementation of ISO/IEC TR 30125:201

2、6. The UK participation in its preparation was entrusted to Technical Committee IST/44, Biometrics. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are re

3、sponsible for its correct application. The British Standards Institution 2016. Published by BSI Standards Limited 2016 ISBN 978 0 580 80606 3 ICS 35.040 Compliance with a British Standard cannot confer immunity from legal obligations. This Published Document was published under the authority of the

4、Standards Policy and Strategy Committee on 31 May 2016. Amendments issued since publication Date Text affectedPD ISO/IEC TR 30125:2016 Information technology Biometrics used with mobile devices Technologies de linformation Biomtrie utilise avec des appareils mobiles TECHNICAL REPORT ISO/IEC TR 30125

5、 First edition 2016-05-01 Reference number ISO/IEC TR 30125:2016(E) ISO/IEC 2016 PD ISO/IEC TR 30125:2016ii ISO/IEC 2016 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2016, Published in Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reprodu

6、ced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requester.

7、ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Switzerland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 copyrightiso.org www.iso.org ISO/IEC TR 30125:2016(E)PD ISO/IEC TR 30125:2016ISO/IEC TR 30125:2016(E)Foreword iv Introduction v 1 Scope . 1 2 Normative references 1 3 T erm

8、s and definitions . 1 4 Abbreviated terms 2 5 The use of biometrics in mobile devices . 2 5.1 Taxonomy of usage of biometrics in mobile devices 2 5.1.1 General 2 5.1.2 Generic considerations for all use cases 2 5.1.3 Access to the device . 4 5.1.4 Access to the local applications, services and/or da

9、ta 4 5.1.5 Access to the communications channel . 5 5.1.6 Verification/authentication of, or to, a remote resource or point of transaction 5 5.2 Generic challenges in the integration of biometrics in mobile devices 6 5.2.1 Computational power 6 5.2.2 Data protection and privacy . 6 5.2.3 Biometric s

10、ample capture 8 5.2.4 Sample authentication process . 9 5.2.5 Usability 10 5.2.6 Solution testing 12 5.2.7 Challenges common to other scenarios and platforms .12 6 Biometrics services within the OS of the mobile device 13 7 Biometric services at the application level in a mobile device .15 8 Biometr

11、ic application development using the biometric engine(s) provided .16 9 Functional and operational guidance 20 9.1 General guidance 20 9.1.1 Guidance on functional architecture .20 9.1.2 Guidance on environmental conditions and constraints .20 9.2 Guidance for enrolment .20 9.2.1 General guidance fo

12、r enrolment 20 9.2.2 Supervised enrolment 21 9.2.3 Unsupervised enrolment .21 9.3 Guidance for authentication .22 9.3.1 Remote unsupervised authentication 22 9.3.2 Local unsupervised authentication 23 10 Use of multi-factor authentication 23 10.1 Fusion and scores for multi-biometrics .23 10.2 Combi

13、ning biometric and non-biometric authentication techniques for greater security and/or usability 24 11 Biometric modality specific guidanc e .24 Bibliography .27 ISO/IEC 2016 All rights reserved iii Contents PagePD ISO/IEC TR 30125:2016ISO/IEC TR 30125:2016(E) Foreword ISO (the International Organiz

14、ation for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respe

15、ctive organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of informati

16、on technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different

17、types of document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall

18、not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents). Any trade name used in this document is

19、information given for the convenience of users and does not constitute an endorsement. For an explanation on the meaning of ISO specific terms and expressions related to conformit y assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Techni

20、cal Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html. The committee responsible for this document is ISO/IEC JTC 1, Information technology, SC 37, Biometrics.iv ISO/IEC 2016 All rights reservedPD ISO/IEC TR 30125:2016ISO/IEC TR 30125:2016(E) Introduction The widespread us

21、e and capability of mobile technology has created a demand for people to be able to conduct their personal and business lives on the move in a way that previously would have been limited to the home and office environments. To service this demand, mobile communications, applications and transactions

22、 need to be protected to safeguard the privacy of the user and to ensure the integrity of the transaction. This is essential for creating a trusted mobile platform environment in which individuals, businesses, non-profit organizations and governments can transact. User authentication, being sure tha

23、t you are dealing with the right person, is a vital part of this and one that poses particular difficulty when the user is communicating from an unknown remote location. The potential for impersonation and fraud is high. User authentication is commonly achieved through the use of a username and pass

24、word. This approach uses only one category of credentials, the password, and is referred to as Single Factor Authentication (SFA). Use of a biometric instead of a password is another example of SFA. For mobile applications that require high levels of security, policy may require the use of more than

25、 one credential. Use of more than one credential is referred to as Multi Factor Authentication (MFA). Multi-factor authentication can be accomplished with one or more of the following: a) something you know (e.g. password); b) something you have (e.g. identity card); c) something you are (e.g. face,

26、 fingerprints, iris). Authentication, in providing assurance that a person is who they say they are, can be improved through the use of biometric recognition. Other forms of identification, such as tokens or passwords, are not closely bound to an individual in the same manner as a biometrics is, and

27、 provide greater opportunity for substitution or theft. Password and token authentication authenticates the password or the token not the person and the authentication assurance is limited by the level of trust that exists that the password or token is being presented by the legitimate user and has

28、not been acquired by an impostor. The range of mobile devices and communication channels involved in mobile transactions is large and variable. Smart phones, tablets, laptops and other smart devices based on embedded systems are common examples of mobile devices and the Internet and Global System fo

29、r Mobile communications (GSM) are examples of communication channels. Mobile devices are often owned by their users but not always; they could be company owned and supplied to employees for their own use. A number of mobile device manufacturers produce units containing sensors. Conceivably, these se

30、nsors could be used to collect biometrics i.e. camera for face, touch screen for finger or palm, microphone for voice, Global Positioning System (GPS) and accelerometers for gait. Applications built for mobile platforms may use these sensors to capture biometrics for purposes such as authentication.

31、 This Technical Report addresses the use of biometrics in scenarios where a person is mobile and wants to connect to a specific service irrespective of the device type and communication channel. There are three key issues to consider when biometrics are used in such scenarios. The biometric capture

32、environment application developers will require a means of taking into account the uncontrolled nature of the capture environment. The uncontrolled capture environment will most likely mean that it is not possible for capture conditions to conform to the best practice constraints for biometric captu

33、re (e.g. pose, background, etc.) set out in current biometric standards; and also require recognition algorithms and/or thresholds to be modified to take account in the case of reduced quality of biometric capture if the application can be compliant with reduced security. Biometric data privacy and

34、security implications the distribution of biometric data to commercial devices with security weaknesses and storage of biometric data in third-party cloud implementations. In this Technical Report, these security and privacy issues are addressed by referencing other standards where available noting

35、that work is ongoing in establishing benchmarks and best ISO/IEC 2016 All rights reserved vPD ISO/IEC TR 30125:2016ISO/IEC TR 30125:2016(E) practice to safeguard information including personal information. Definition of standards for security in mobile devices is not in the scope of this Technical R

36、eport. Biometric authentication - relative consistency of approach to biometric authentication across all application developers to ensure best practice and consistent look and feel for users.” (More information may be found in NISTIR 8003). Current biometric standards and associated security standa

37、rds for biometrics do not yet adequately address the issues raised with the use of biometric capture on commercial computing devices, with distribution of biometric data via the cloud. Work is still required in establishing benchmarks and best practice. This Technical Report is aimed at all parties

38、with an interest in offering biometric functions or a biometric framework for use on mobile platforms including developers of third-party open source software libraries. It is also intended to provide a reference document for standards developers seeking to develop standards for the use of biometric

39、s in mobile environments.vi ISO/IEC 2016 All rights reservedPD ISO/IEC TR 30125:2016TECHNICAL REPORT ISO/IEC TR 30125:2016(E) Information technology Biometrics used with mobile devices 1 Scope This Technical Report provides guidance for developing a consistent and secure method of biometric (either

40、alone or supported by non-biometric) personalization and authentication in a mobile environment for systems procured on the open market. Guidance is provided for 1:1 verification or 1:few positive identification; biometric sample capture in the mobile environment where conditions are not well contro

41、lled and not covered in ISO/IEC Biometric interchange format standards and the ISO/IEC Biometric sample quality Technical Reports; NOTE 1 Further information regarding architectures may be found in NIST/SP 500-288. the best use of multiple biometric and non-biometric (PINs, passwords, personal data)

42、 personalization and authentication methods (i.e. multifactor). NOTE 2 More information may be found in ISO/IEC 30108-1. This Technical Report defines a framework to address methods and approaches for remote and unsupervised enrolment, together with secure storage and transmission of biometric and s

43、upporting biographic data, covering a variety of both online connected and offline modes. This Technical Report identifies the functional elements and components of a generic mobile biometric system and the distinct characteristics of each component. It provides guidance related to a generic mobile

44、architecture with reference to supporting standards. The context recognizes a) the user as being mobile and b) operation across a variety of platforms, particularly mobile devices but also including tablet, laptop and other personal computing devices. The key to defining this context is whether the

45、users environment is physically controlled by the organization to which the user seeks access. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited appl

46、ies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/IEC 2382-37 1) , Information technology Vocabulary Part 37: Biometrics 3 T erms a nd definiti ons For the purposes of this document, the terms and definitions given in ISO/IEC 2382-37 a

47、nd the following apply. 1) For a freely available copy of ISO/IEC 2382-37:2012, see: http:/standards.iso.org/ittf/ PubliclyAvailableStandards/index.html. ISO/IEC 2016 All rights reserved 1PD ISO/IEC TR 30125:2016ISO/IEC TR 30125:2016(E) 3.1 mobile device small, compact, handheld, lightweight computi

48、ng device, typically having a display screen with digitizer input and/or a miniature keyboard Note 1 to entry: Examples include laptops, tablet PCs, wearable ICT devices, smartphones, USB gadgets. 3.2 personalization ability to configure for a device to react in particular way for a specific individ

49、ual 4 Abbreviated terms BI Biometric interface GPS Global Positioning System GUI Graphical user interface LAC Logical access control NFC Near field communication OS Operating system OTG On-the-go the USB connector of a smartphone SE Secure element TEE Trusted execution environment USB Universal Serial Bus 5 The use of biometrics in mobile devices 5.1 Taxonomy of usage of biometrics in mobile devices 5.1.1 General The context in which mobile devices can be used may be cat