BS ISO IEC 29142-3-2013 Information technology Print cartridge characterization Environment《信息技术 打印盒特性描述 环境》.pdf
《BS ISO IEC 29142-3-2013 Information technology Print cartridge characterization Environment《信息技术 打印盒特性描述 环境》.pdf》由会员分享,可在线阅读,更多相关《BS ISO IEC 29142-3-2013 Information technology Print cartridge characterization Environment《信息技术 打印盒特性描述 环境》.pdf(22页珍藏版)》请在麦多课文档分享上搜索。
1、raising standards worldwide NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BSI Standards Publication BS ISO/IEC 29142-3:2013 Information technology Print cartridge characterization Part 3: EnvironmentBS ISO/IEC 29142-3:2013 BRITISH STANDARD National foreword This British Stan
2、dard is the UK implementation of ISO/IEC 29142-3:2013. The UK participation in its preparation was entrusted to Technical Committee IST/3, IT Printers and Cartridges. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport
3、to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2013. Published by BSI Standards Limited 2013 ISBN 978 0 580 74571 3 ICS 37.100.10 Compliance with a British Standard cannot confer immunity from legal obligati
4、ons. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2013. Amendments issued since publication Date Text affectedBS ISO/IEC 29142-3:2013Reference number ISO/IEC 29142-3:2013(E) ISO/IEC 2013INTERNATIONAL STANDARD ISO/IEC 29142-3 First
5、 edition 2013-03-01 Information technology Print cartridge characterization Part 3: Environment Technologies de linformation Caractrisation de cartouche dimpression Partie 3: Environnement BS ISO/IEC 29142-3:2013 ISO/IEC 29142-3:2013(E) COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2013 All rights reserved.
6、Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISOs member body in the country of the requester. I
7、SO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO/IEC 2013 All rights reservedBS ISO/IEC 29142-3:2013 ISO/IEC 29142-3:2013(E) ISO/IEC 2013 All rights reserved iiiContents Page For
8、eword iv Introduction . v 1 Scope 1 2 Normative references 1 3 Terms and definitions . 2 4 Abbreviated terms . 5 5 Relationship with ISO 14020 Series . 5 6 Company environmental responsibility 5 7 Environmental attributes throughout the cartridge life-cycle 5 8 Verification methods . 9 9 Life-cycle
9、assessment 10 10 Certification and compliance . 10 11 Mutual recognition 10 Bibliography 11 BS ISO/IEC 29142-3:2013 ISO/IEC 29142-3:2013(E) iv ISO/IEC 2013 All rights reservedForeword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) for
10、m the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC t
11、echnical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1
12、. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of the joint technical committee is to prepare International Standards. Draft International Standards adopted by the joint technical committee are circulated to national bodies f
13、or voting. Publication as an International Standard requires approval by at least 75 % of the national bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO and IEC shall not be held responsible for identifyin
14、g any or all such patent rights. ISO/IEC 29142-3 was prepared by Joint Technical Committee ISO/IEC JTC 1, Information technology, Subcommittee SC 28, Office equipment. ISO/IEC 29142 consists of the following parts, under the general title Information technology Print cartridge characterization: Part
15、 3: Environment The following parts are under preparation: Part 1: General: terms, symbols, notations and cartridge characterization framework Part 2: Cartridge Characterization Data Reporting BS ISO/IEC 29142-3:2013 ISO/IEC 29142-3:2013(E) ISO/IEC 2013 All rights reserved vIntroduction The purpose
16、of this part of ISO/IEC 29142 is to establish principles and framework for environmental product standards, environmental labels, and green procurement criteria specific to ink and toner cartridges used in printing devices that have a digital input printing path, including multi-function devices. Th
17、is standard includes terminology definitions for such cartridges and their environmental interactions, cartridge environmental attributes, and test methods for inclusion in cartridge environmental standards, environmental labels, and green procurement criteria. Printing systems use consumables and b
18、ecause of this, environmental responsibility is important to be considered during the phases of design, manufacturing, printer operation and end-of-life. The terms, definitions, attributes, and test methods established in this standard are generally applicable to all cartridges and are intended for
19、use in the development of environmental standards, environmental labels, and green procurement guidelines. The defined attributes and methods form a framework to standardize the treatment and definition of cartridge environmental issues. The foundation provided in this standard supports the followin
20、g objectives: 1. Minimization of product environmental impact throughout the cartridge life-cycle 2. Minimization of product environmental impact associated with end-of-life In an attempt to harmonize with existing environmental labels, standards, declarations, and green procurement criteria, enviro
21、nmental provisions and measurement methods already well established will be referenced wherever possible. This includes consideration of legal requirements and customer expectations associated with material use, manufacturing operations, and packaging, and/or management during end-of- life. This par
22、t of ISO/IEC 29142 provides the following: 1. Terms and definitions related to cartridge environmental attributes. 2. Cartridge environmental attributes for inclusion in environmental labels, standards and green procurement criteria. 3. Test methods that manufacturers, test labs, etc., use to determ
23、ine values for the defined cartridge environmental attributes. 4. Methods for determination of declared values from the test results. 5. Methods for declaration of conformance to provisions that dont require measurement. This International Standard is intended for office equipment environments. BS I
24、SO/IEC 29142-3:2013BS ISO/IEC 29142-3:2013 INTERNATIONAL STANDARD ISO/IEC 29142-3:2013(E) ISO/IEC 2013 All rights reserved 1Information technology Print cartridge characterization Part 3: Environment 1 Scope This part of ISO/IEC 29142 describes the principles and framework for environmental assessme
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
5000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BSISOIEC2914232013INFORMATIONTECHNOLOGYPRINTCARTRIDGECHARACTERIZATIONENVIRONMENT 信息技术 印盒 特性 描述 环境 PDF

链接地址:http://www.mydoc123.com/p-396724.html