BS ISO IEC 11179-6-2015 Information technology Metadata registries (MDR) Registration《信息技术 元数据注册 (MDR) 注册》.pdf

《BS ISO IEC 11179-6-2015 Information technology Metadata registries (MDR) Registration《信息技术 元数据注册 (MDR) 注册》.pdf》由会员分享，可在线阅读，更多相关《BS ISO IEC 11179-6-2015 Information technology Metadata registries (MDR) Registration《信息技术 元数据注册 (MDR) 注册》.pdf（76页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards Publication BS ISO/IEC 11179-6:2015 Information technology Metadata registries (MDR) Part 6: RegistrationBS ISO/IEC 11179-6:2015 BRITISH STANDARD National foreword This British Standard is the UK implementation of ISO/IEC 11179-6:2015. The UK participation in its preparation was entrus

2、ted to Technical Committee IST/40, Data management and interchange. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct applic

3、ation. The British Standards Institution 2015. Published by BSI Standards Limited 2015 ISBN 978 0 580 86014 0 ICS 35.040 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Comm

4、ittee on 31 August 2015. Amendments issued since publication Date Text affectedBS ISO/IEC 11179-6:2015 Information technology Metadata registries (MDR) Part 6: Registration Technologies de linformation Registres de mtadonnes (RM) Partie 6: Enregistrement des donnes INTERNATIONAL STANDARD ISO/IEC 111

5、79-6 Reference number ISO/IEC 11179-6:2015(E) Third edition 2015-0 8-01 ISO/IEC 2015 BS ISO/IEC 11179-6:2015ii ISO/IEC 2015 All rights reserved COPYRIGHT PROTECTED DOCUMENT ISO/IEC 2015, Published in Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be repr

6、oduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the country of the requeste

7、r. ISO copyright office Ch. de Blandonnet 8 CP 401 CH-1214 Vernier, Geneva, Switzerland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 copyrightiso.org www.iso.org ISO/IEC 11179-6:2015(E)BS ISO/IEC 11179-6:2015ISO/IEC 11179-6:2015(E)Foreword iv Introduction v 1 Scope . 1 1.1 Statement of scope . 1 1.2 E

8、xclusions 1 2 Normative references 1 3 T erms and definitions . 1 4 Concept of operation 9 4.1 Metamodel of a Metadata Registry 9 4.2 Metadata Items . 9 4.3 Common facilities 10 4.3.1 Identification 10 4.3.2 Designation and Definition 10 4.3.3 Classification 10 4.3.4 Registration .11 4.4 Status cate

9、gories.11 4.4.1 General.11 4.4.2 Summary of registration status categories 11 4.4.3 Description of administrative status .14 4.5 Procedures .14 5 Metadata Registries of Administered Items 15 5.1 General 15 5.2 Contents .16 5.2.1 Metadata Registry Views .16 5.2.2 Metadata Registry Contents and Levels

10、 of Conformance 16 5.2.3 Metadata Registry Contents and Types of Administered Items .16 5.3 Language(s) 16 5.4 Availability of the Metadata Registry of Administered Items 16 6 Conformance 16 Annex A (informative) Identifiers based on ISO/IE C 6523 .17 Annex B (normative) C ont ents of the Metadata R

11、 egistry: Metadata attribut es r equir ed for Administered Items 22 Annex C (informative) Suggest ed functional oper ating pr oc edur es R oles and R esponsibilities 41 Annex D (informative) Suggested functional operating procedures Concept of operations .48 Annex E (informative) Suggested functiona

12、l operating procedures Procedures .51 Annex F (informative) Suggested functional operating procedures Harmonization and reuse 60 Annex G (informative) F r equentl y Ask ed Questions .62 Bibliogr aph y .65 ISO/IEC 2015 All rights reserved iii Contents PageBS ISO/IEC 11179-6:2015ISO/IEC 11179-6:2015(E

13、) Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through tech

14、nical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take pa

15、rt in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different ap

16、proval criteria needed for the different types of document should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives). Attention is drawn to the possibility that some of the elements of this document may be the sub

17、ject of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).

18、 Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO principles

19、in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information The committee responsible for this document is ISO/IEC JTC 1, Information technology, Subcommittee SC 32, Data management and interchange. This third edition cancels and replaces the second edition (

20、ISO/IEC 11179-6:2005), which has been technically revised. ISO/IEC 11179 consists of the following parts, under the general title Information technology Metadata registries (MDR): Part 1: Framework Part 2: Classification Part 3: Registry metamodel and basic attributes Part 4: Formulation of data def

21、initions Part 5: Naming principles Part 6: Registrationiv ISO/IEC 2015 All rights reservedBS ISO/IEC 11179-6:2015ISO/IEC 11179-6:2015(E) Introduction This part of ISO/IEC 11179 describes the procedure by which metadata items required in various application areas could be assigned an internationally

22、unique identifier and registered in a metadata registry maintained by one or more Registration Authorities. This edition of this part of ISO/IEC 11179 supports multiple schemes for ensuring the uniqueness of the identification. The metamodel of a metadata registry defined in ISO/IEC 11179-3 allows a

23、 metadata item to simply be identified or to be both identified and registered. A registered item may either be an administered item, meaning it has its own registration state, or it may be an attached item, which means it is attached to an administered item and shares the latters registration state

24、. The registered items are included in Metadata Registries maintained by one or more Registration Authorities, to which the registered items logically and functionally belong. An organization wishing to become a Registration Authority may do so in accordance with the procedure prescribed in Annex A.

25、 The registration process described in this part of ISO/IEC 11179 may be applied to any type of metadata item, such as those specified by ISO/IEC 11179-3: data elements, data element concepts, conceptual domains, value meanings, value domains, classification schemes, and concept systems; those speci

26、fied by ISO/IEC 19763: ontologies, process models, service models, role and goal models, information models, mappings between models, and form designs; and/or custom types not specified by these standards. Each registered item is represented within a metadata registry by a registration record that d

27、ocuments the common administration and identification, naming and definition details together with their metadata item-specific details. Within this part of ISO/IEC 11179, the use of “Metadata Registry” denotes an implementation of a metadata registry that is based upon ISO/IEC 11179 and that is man

28、aged by one or more Registration Authorities. ISO/IEC 2015 All rights reserved vBS ISO/IEC 11179-6:2015BS ISO/IEC 11179-6:2015Information technology Metadata registries (MDR) Part 6: Registration 1 Scope 1.1 Statement of scope This part of ISO/IEC 11179 defines the type of information to be specifie

29、d, the conditions to be met, and the procedure(s) to be followed for each metadata item to be registered in a metadata registry. The requirements and procedures contained herein apply to all metadata items specified in ISO/IEC 11179-3 and those specified in ISO/IEC 19763. Some Registration Authoriti

30、es may want to use this part of ISO/IEC 11179 to register and manage locally defined metadata item types that are not defined in ISO/IEC 11179-3 or ISO/IEC 19763. This part of ISO/IEC 11179 addresses the common metadata that is used to document the common facilities of a metadata registry: administr

31、ation, identification, naming and definition, details that can apply to any and all types of metadata items. 1.2 Exclusions This part of ISO/IEC 11179 does not address the metadata that is specific to particular types of metadata items such as data elements and value domains. This part of ISO/IEC 11

32、179 does NOT specify the registrys system design, file organization techniques, storage media, programming languages, etc. to be used in its implementation. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its

33、application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/IEC 11179-1, Information technology Metadata registries (MDR) Part 1: Framework ISO/IEC 11179-3, Information technology Met

34、adata registries (MDR) Part 3: Registry metamodel and basic attributes 3 T erms a nd definiti ons For the purposes of this document, the following terms and definitions apply. 3.1 administered item registered item (3.38) for which administrative information (3.2) is recorded SOURCE: ISO/IEC 11179-3:

35、2013, 3.2.2 3.2 administrative informationinformation about the administration of an item in a metadata registry (3.26) EXAMPLE Creation date, last change date, origin, change description, and explanatory comment. INTERNATIONAL ST ANDARD ISO/IEC 11179-6:2015(E) ISO/IEC 2015 All rights reserved 1BS I

36、SO/IEC 11179-6:2015ISO/IEC 11179-6:2015(E) SOURCE: ISO/IEC 11179-3:2013, 3.2.3 3.3 administrative status designation (3.10) of the status in the administrative process of a Registration Authority (3.42) SOURCE: ISO/IEC 11179-3:2013, 8.1.2.6.2.6 Note 1 to entry: Administrative status is described in

37、4.4.3. Examples are provided in E.3. 3.4 attached item registered item (3.38) for which administrative information (3.2) is recorded in another registered item Note 1 to entry: This is often a member of a group of registered items that is managed as a whole. SOURCE: ISO/IEC 11179-3:2013, 3.2.6 3.5 c

38、la ssi f ia b l e i te m metadata item (3.23) of a type for which classification is supported in a given metadata registry (3.26) SOURCE: ISO/IEC 11179-3:2013, 3.2.15 3.6 cla ssi f i c a t i o n sch e m e descriptive information for an arrangement or division of objects into groups based on criteria

39、 such as characteristics, which the objects have in common EXAMPLE Origin, composition, structure, application, function, etc. SOURCE: ISO/IEC 11179-3:2013, 3.2.16 3.7 contact instance of a role (3.49) of an individual (3.16) or organization (3.30) or organization part (3.33) or organization Person

40、(3.35) to or from whom an information item(s), a material object(s) and/or person(s) can be sent in a specified context SOURCE: ISO/IEC 11179-3:2013, 3.2.23 3.8 data re-interpretable representation of information in a formalized manner suitable for communication, interpretation, or processing Note 1

41、 to entry: Data can be processed by human or automatic means. SOURCE: ISO/IEC 2382-1:1993, 01.01.02 3.9 data elementunit of data (3.8) that is considered in context to be indivisible EXAMPLE The data element “age of a person” with values consisting of all combinations of three decimal digits. SOURCE

42、: ISO/IEC 2382-4:1999, 04.07.01 Note 1 to entry: The definition states that a data element is “indivisible” in some context. This means that it is possible that a data element considered indivisible in one context (e.g., telephone number) might be divisible in another context (e.g., country code, ar

43、ea code, local number).2 ISO/IEC 2015 All rights reservedBS ISO/IEC 11179-6:2015ISO/IEC 11179-6:2015(E) 3.10 designation representation of a concept by a sign which denotes it SOURCE: ISO 1087-1:2000, 3.4.1 3.11 de s i g n at able i t em identified item (3.12) which can have designations and/or defi

44、nitions SOURCE: ISO/IEC 11179-3:2013, 3.2.50 3.12 i d en t i f i e d it em metadata item (3.23) identified in a metadata registry (3.26) SOURCE: ISO/IEC 11179-3:2013, 3.2.64 3.13 ide nt i f ie rstring used to unambiguously denote an identified item (3.12) within the scope of a specified namespace (3

45、.27) SOURCE: ISO/IEC 11179-3:2013, 7.2.2.2.2.1 3.14 ide nt i f ic at ion assignment of an unambiguous identifier (3.13) to an identified item (3.12) in a way that makes the assignment available to interested parties 3.15 ide nt i f ic at ion s c heme system allocating identifiers (3.13) to registere

46、d objects SOURCE: ISO/IEC 6523:1998, 3.6 3.16 individual single human being SOURCE: ISO/IEC 11179-3:2013, 3.2.65 3.17 International Code Designator ICD identifier (3.13) of an organization identification scheme (3.31) SOURCE: ISO/IEC 6523-1:1998, 3.8 modified 3.18 International Code Designator value

47、 ICD value identifier (3.13) allocated to a particular organization identification scheme (3.31) SOURCE: ISO/IEC 6523:1998, 3.9 3.19 i nt e r n at ion a l r e g i s t r at ion d at a ident i f ie r IRDI internationally unique identifier (3.13) for a identified item (3.12) as defined in the framework

48、 of ISO/IEC 11179 ISO/IEC 2015 All rights reserved 3BS ISO/IEC 11179-6:2015ISO/IEC 11179-6:2015(E) 3.20 it em i d en t i f i er identifier (3.13) for an item Note 1 to entry: ISO/IEC 11179-3:2013 uses the term scoped identifier (3.50) because each identifier is defined within the scope of a namespac

49、e (3.27). 3.21 it em r e g i s t r a t i o n a ut h o r it y i d en t i f i er identifier (3.13) of the Registration Authority (3.42) registering the item 3.22 metadata data (3.8) that defines and describes other data SOURCE: ISO/IEC 11179-3:2013, 3.2.74 3.23 metadata item instance of a metadata object (3.24) Note 1 to entry: In all parts of ISO/IEC 11179, this term is applied only to instances of metadata objects described by the m